Please wait a minute...
材料研究学报  2005, Vol. 19 Issue (1): 84-89    
  论文 本期目录 | 过刊浏览 |
马氏体相变的界面吸引子模型
万见峰;陈世朴;徐祖耀
上海交通大学
Interfacial attractor model of martensitic transformation
;;
上海交通大学
引用本文:

万见峰; 陈世朴; 徐祖耀 . 马氏体相变的界面吸引子模型[J]. 材料研究学报, 2005, 19(1): 84-89.

全文: PDF(564 KB)  
摘要: 从经典的马氏体相界面运动方程出发, 利用相平面分析, 证明具有界面摩擦的马氏体相界面是吸引子, 与理想的马氏体相界面的孤立子特征不同. 通过对非线性方程解的分析, 得到发生应力诱发马氏体相变的相界面趋向为焦点型定常吸引子, 而热诱发相变的马氏体相界面趋向为结点型定常吸引子, 因此考虑界面摩擦后相界面的运动与理想相界面的运动具有不同的非线性特征.
关键词 材料科学基础学科马氏体相变吸引子相界    
Abstract:The interface of the martensite/parent was suggested as the attractor based on the phase plane analyses from the classical equation of interfacial motion, which is different from the soliton model of the ideal martensite/parent interface. The solutions of the equation of motion indicated that the interface of the stress--induced martensitic transformation tended to be the focus--like steady attractor and the thermal--induced to be the joint--like steady attractor. So the interfacial motion including the friction exhibits an apparently different nonlinear character from the interfacial motion without the friction.
Key wordsfoundational discipline in materials science    martensitic transformation    attractor    interfacial of the
收稿日期: 2005-03-17     
ZTFLH:  TG111  
1 M.Grujicic, G.B.Olson, W.S.Owen, Metall Trans, 16A, 1713(1985)
2 Z.F.Zhang, H.M.Shen, Y.N.Huang, Z.Yang, X.M.Wang, Y.N.Wang, S.S.Tan, Acta Metall Sinica, 32, 1009(1996)(张志方,沈惠敏,黄以能,杨震,王小敏,王业宁,谭树松,金属学报,32,1009(1996))
3 Y.Deng, G.S.Ansell, Acta Metall., 38, 69(1990)
4 W.H.Wang, J.L.Chen, Z.H.Liu, G.H.Wu, W.S.Zhan, Phys. Rev. B 65, 012416(2002)
5 M.Tang, J.H.Zhang, T.Y.Hsu, Acta Materialia, 50, 467(2002)
6 J.F.Wan, X.L.Lei, S.P.Chen, T.Y.Hsu, Phys. Rev. B 70, 014303(2004)
7 J.F.Wan, X.L.Lei, S.P.Chen, T.Y.Hsu, Materials Transactions, 45(3), 953(2004)
8 F.Falk, E.W.Laedke, K.H.Spatschek, Phys. Rev. B, 36, 3031(1987)
9 Y.Zhao, J.H.Zhang, T.Y.Hsu(Xu Zuyao), J. Appl. Phys., 88, 4022(2000)
10 I.Gikeo, Dynamical Systems and Nonlinear Oscillations (Singapore: World Scientific, 1986) p.140
11 J.Guckenheimer, Nonlinear Oscillations, Dynamical Systems, and Bifurcations of Vector Fields (New York, Springer-Verlag, 1983) p.110
12 G.B.Olson, M.Cohen, Metall Trans., 7A, 1897(1976)
13 J.D.Eisenwasser, L.C.Brown, Metall Trans., 3, 1359(1972)
14 S.Miura, S.Maeda, N.Nakanishi, Phil. Mag., 30, 565(1974)
15 U.F.Kocks, A.S.Argon, M.F.Ashby, Prog. Mater. Science, 19, 1(1975)
16 L.Delaey, T.Suzuki, J.V.Humbeeck, Scrip Metall., 18, 899(1984)I
[1] 杨栋天, 熊良银, 廖洪彬, 刘实. 基于热力学模拟计算的CLF-1钢改良设计[J]. 材料研究学报, 2023, 37(8): 590-602.
[2] 姜水淼, 明开胜, 郑士建. 晶界偏析以及界面相和纳米晶材料力学性能的调控[J]. 材料研究学报, 2023, 37(5): 321-331.
[3] 孙艺, 韩同伟, 操淑敏, 骆梦雨. 氟化五边形石墨烯的拉伸性能[J]. 材料研究学报, 2022, 36(2): 147-151.
[4] 谢明玲, 张广安, 史鑫, 谭稀, 高晓平, 宋玉哲. Ti掺杂MoS2薄膜的抗氧化性和电学性能[J]. 材料研究学报, 2021, 35(1): 59-64.
[5] 岳颗, 刘建荣, 杨锐, 王清江. Ti65合金的初级蠕变和稳态蠕变[J]. 材料研究学报, 2020, 34(2): 151-160.
[6] 鲁效庆,张全德,魏淑贤. A-π-D-π-A型吲哚类染料敏化剂的光电特性[J]. 材料研究学报, 2020, 34(1): 50-56.
[7] 李学雄,徐东生,杨锐. 钛合金双态组织高温拉伸行为的晶体塑性有限元研究[J]. 材料研究学报, 2019, 33(4): 241-253.
[8] 李勰, 朱晓东, 王婷婷, 王会. La掺杂纳米ZnO/硅藻土复合材料的制备及其对甲醛气体的降解性能[J]. 材料研究学报, 2018, 32(9): 685-690.
[9] 王葛, 王亚杰, 李磊, 马占山, 胡君泰, 陈博伟, 李强. Cr5钢马氏体的相变塑性和应力对其相变动力学的影响[J]. 材料研究学报, 2018, 32(7): 481-486.
[10] 李会鹏, 熊毅, 路妍, 贺甜甜, 范梅香, 任凤章. 应变速率对低温拉伸316LN奥氏体不锈钢微观组织和力学性能的影响[J]. 材料研究学报, 2018, 32(2): 105-111.
[11] 刘庆生, 曾少军, 张丹城. 基于细观结构的阴极炭块钠膨胀应力数值分析及实验验证[J]. 材料研究学报, 2017, 31(9): 703-713.
[12] 马志军, 莽昌烨, 王俊策, 翁兴媛, 司力玮, 关智浩. 三种金属离子掺杂对纳米镍锌铁氧体吸波性能的影响[J]. 材料研究学报, 2017, 31(12): 909-917.
[13] 黄莉. 石蜡/水相变乳液的稳定性能和储能容量[J]. 材料研究学报, 2017, 31(10): 789-795.
[14] 许久凌, 黄海威, 赵明纯, 王镇波, 卢柯. 316L不锈钢在表面机械滚压处理时的形变诱导马氏体相变和组织细化过程*[J]. 材料研究学报, 2016, 30(1): 15-22.
[15] 朱良,王晶,李晓慧,锁红波,张亦良. 基于堆焊成形钛合金高周疲劳实验数据的R-S-N模型[J]. 材料研究学报, 2015, 29(9): 714-720.