|
|
|
| Mo2Ni3Si/NiSi复合材料涂层的滑动磨损行为 |
| 吕旭东; 王华明 |
| 北京航空航天大学材料学院 |
|
引用本文:
吕旭东; 王华明 . Mo2Ni3Si/NiSi复合材料涂层的滑动磨损行为[J]. 材料研究学报, 2003, 17(4): 389-395.
1 D.M.Shah, D.Berczik, D.L.Anton, R.Hecht, Appraisal of other silicides as structural materials, Mat.Sci.Eng., A155, 45(1992)
2 J.J.Petrovic, A.K.Vasudevan, Key developments in high temperature structural silicides, Mat.Sci.Eng., A261, 1(1999)
3 A.K.Vasudevan, A comparative overview of molybdenum silicide composites, Mat.Sci.Eng., A155, 1(1992)
4 Y.F.Liu(刘元富), H.Y.Zhao(赵海云), H.M.Wang(王华明), Microstructure and wear resistance of laser clad Ti_5Si_3/NiTi_2 composite coating (激光熔敷 Ti_5Si_3/NiTi_2 复合材料涂层组织与耐磨性), Chinese Journal of Materials Research(材料研究学报), 16(3) , 313(2002)
5 P.Jiang(蒋平), J.J.Zhang (张继娟), L.G.Yu(于利根), H.M.Wang(王华明), Wear-resistant Ti_5Si_3/Ti composite coatings by laser surface alloying (激光表面合金化 Ti_5Si_3/Ti 复合材料涂层的耐磨性), Rare Metal Materials and Engineering(稀有金属材料与工程), 29(4) , 269(2000)
6 G.Duan, H.M.Wang, High-temperature wear resistance a laser clad γ/Cr_3Si metal silicide composite coating, Scripta Mater, 146, 107(2002)
7 H.M.Wang, G.Duan, L.Y.Zhang, W.J.Xi, Laser cladding for wear and corrosion-resistant multifunctional Cr_3Si/Cr_2Ni_3Si metal silicide matrix composite coating, in: Laser in Materials Processing and Mantifacturing, edited by SPIE(2002) p.162
8 H.M.Wang, G.Duan, Microstructure and wear resistance of laser clad reinforced Cr_3Si metal silicide composite coating, Mat.Sci.Eng., A336, 117(2002)
9 X.D.Lu(吕旭东), H.M.Wang(王华明), Microstructure of laser clad MoSi_2 metal silicide composite coating (激光熔覆 MoSi_2 金属硅化物复合材料涂层显微组织), Applied Laser(应用激光), 22(2) , 272(2002)
10 P.Villars, A.Prince, H.Okamoto(Eds.), Handbook of Ternary Alloy Phase Diagrams, American Society for Metals (New York, 1994) p.12539
11 Kazuhiro Ito, Takayuki Yano, TaKayuki NaKamoto, Masaya Moriwaki, Haruyuki Inui, Masahara Yamaguchi, Microstructure and mechanical propertyes of MoSi_2 single crystals and directionally solidified MoSi_2-based alloys, Mat.Sci., 42, 193(1997)
12 Y.Q.Liu, G.Shao, P.Tsakiropoulos, On the oxidation behavior of MoSi_2, Intermetallics, 9, 125(2001)
13 J.H.Schneibel, C.T.Liu, L.Heatherly M.J.Kramer, Assessment of processing routes and strength of a 3-phase molybdunem boron silicide (Mo_5Si_3-Mo_5SiB_2-Mo_3Si), Scripta Mater., 38(7) , 1169(1998)N |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
