Please wait a minute...
材料研究学报  2003, Vol. 17 Issue (1): 78-82    
  论文 本期目录 | 过刊浏览 |
AlN玻璃复合材料的低温烧结和性能
张擎雪; 李文兰; 庄汉锐
中国科学院上海硅酸盐研究所
引用本文:

张擎雪; 李文兰; 庄汉锐 . AlN玻璃复合材料的低温烧结和性能[J]. 材料研究学报, 2003, 17(1): 78-82.

全文: PDF(715 KB)  
摘要: 用热压方法在850~1000℃制备出低温烧结AlN/硼硅酸盐玻璃复合材料, 研究了玻璃的高温行为及其对AlN的润湿能力, 分析了颗粒配比对复合材料烧结致密化的影响, 探讨了影响复合材料热导率的因素. 结果表明: 引入对AlN润湿良好的硼硅酸盐玻璃, 可将烧结温度降低到1000℃以下; 采用适当的AlN和玻璃粉体的粒径比有利于提高复合材料的烧结致密化程度.具有均匀显微结构的低温烧结AlN/玻璃复合材料具有良好的热导性能, 其热导率高于10W/(m.K).
关键词 复合材料AlN/玻璃复合材料低温烧结    
Key words
收稿日期: 1900-01-01     
1 Z.D.Zhang,Mgnetic nanocapsules,J.Mater.Sci.Tech., 23,1(2007)
2 N.S.Stoloff,C.T.Liu,S.C.Deevi,Emerging applications of intermetallics,Intermetallics,8,1313(2000)
3 C.M.Ward-Close,R.Minor,P.J.Doorbar,Intermetallic- matrix composites-a review,Intermetallics,4,217(1996)
4 S.X.Mao,N.A.McMinn,N.Q.Wu,Processing and mechan- ical behaviour of TiAl/NiAl intermetallic composites pro- duced by cryogenic mechanical alloying,Mater.Sci.Eng. A,363,275(2003)
5 D.Chen,J.H.Chen,H.G.Yan,Z.H.Chen,Synthesis of bi- nary and ternary intermetallic powders via a novel reac- tion ball milling technique,Mater.Sci.Eng.A,444, 1(2007)
6 Ayumu Onda,Takayuki Komatsu,Tatsuaki Yashima, Preparation and catalytic properties of single-phase Ni- Sn intermetallic compound particles by CVD of Sn(CH_3)_4 onto Ni/Silica,J.Catal.,201,13(2001)
7 Y.Feng,M.C.Yang,X.K.Sun,W.D.Wei,The formation of Ti-Fe nanoparticles by gas condensation method, Nanostr.Mater.,9,113(1997)
8 S.Ma,D.Y.Geng,W.S.Zhang,W.Liu,X.L.Ma, Z.D.Zhang,Synthesis of a new type of GdAl_2 nanocapsule with a large cryogenic magnetocaloric effect and novel coral-like aggregates self-assembled by nanocapsules Nanotechnology,17,5406(2006)
9 Ayumu Onda,Takayuki Komatsu,Tatsuaki Yashima, Characterizations and catalytic properties of fine particles of Ni-Sn intermetallic compounds supported on SiO_2,J. Catal.,221,378(2003)
10 J.Hassoun,S.Panero,B.Scrosati,Electrodeposited Ni-Sn intermetallic electrodes for advanced lithium ion batteries, J.Power Sources,160,1336(2006)
11 DONG Xinglong,SUN Weimin,WANG Wei,LI Zhijie, A atomatic control equipment and its operating methods for producing metallic nanoparticles by DC arc discharge, China,200410021190.1,2004. (董星龙,孙维民,王维,李志杰,一种自动控制直流电弧金属纳米粉生产设备和使用方法,中国专利申请号:200410021190.1)
12 X.G.Li,A.Chiba,S.Takahashia,Preparation and mag- netic properties of ultrafine particles of Fe-Ni alloys,J. Magn.Magn.Mater.,170,339(1997)
13 JIANG Yu,LIU Ming,YANG Yanming,GUAN Deng- gao,CHEN Jiazhao,TU Mingjing,The hydrogen mecha- nism study in preparing nanonickel by plasma arc spraying method,Rare Metal Mater.Eng.,34,475(2005) (蒋渝,刘明,杨彦明,管登高,陈家钊,涂铭旌,等离子弧流溅射法制备纳米镍粉中的氢作用机制,稀有金属材料与工程,34,475(2005))
14 I.Langmuir,The vapor pressure of metallic tungsten, Phys.Rev.,2,329(1913)
15 H.S.Liu,J.Wang,Z.P.Jin,Thermodynamic optimization of the Ni-Sn binary system,CALPHAD,28,363(2004)
16 K.C.Won,M.L.Hyuck,Prediction of primary intermetallic compound formation during interfacial reaction between Sn-based solder and Ni substrate,Scripta Mater.,46, 777(2002)
17 Thompson,C.V.,On the role of diffusion in phase selec- tion during reactions at interfaces,J.Mater.Res.,7(2), 367(1992)
18 X.G.Li,A.Chiba,S.Takahashia,K.Ohsaki,Preparation, oxidation and magnetic properties of Fe--Cr ultrafine pow- ders by hydrogen plasma-metal reaction,J.Magn.Magn. Mater.,173,101(1999)
19 H.G.Jiang,M.Kyoung-sik,H.Dong,F.Hua,C.P.Wong, Size-dependent melting properties of tin nanoparticles, Chem.Phys.Lett.,429,492(2006)
[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 刘瑞峰, 仙运昌, 赵瑞, 周印梅, 王文先. 钛合金/不锈钢复合板的放电等离子烧结技术制备及其性能[J]. 材料研究学报, 2023, 37(8): 581-589.
[3] 季雨辰, 刘树和, 张天宇, 查成. MXene在锂硫电池中应用的研究进展[J]. 材料研究学报, 2023, 37(7): 481-494.
[4] 王伟, 解泽磊, 屈怡珅, 常文娟, 彭怡晴, 金杰, 王快社. Graphene/SiO2 纳米复合材料作为水基润滑添加剂的摩擦学性能[J]. 材料研究学报, 2023, 37(7): 543-553.
[5] 张藤心, 王函, 郝亚斌, 张建岗, 孙新阳, 曾尤. 基于界面氢键结构的石墨烯/聚合物复合材料的阻尼性能[J]. 材料研究学报, 2023, 37(6): 401-407.
[6] 邵萌萌, 陈招科, 熊翔, 曾毅, 王铎, 王徐辉. C/C-ZrC-SiC复合材料的Si2+ 离子辐照行为[J]. 材料研究学报, 2023, 37(6): 472-480.
[7] 张锦中, 刘晓云, 杨健茂, 周剑锋, 查刘生. 温度响应性双面纳米纤维的制备和性能[J]. 材料研究学报, 2023, 37(4): 248-256.
[8] 王刚, 杜雷雷, 缪自强, 钱凯成, 杜向博文, 邓泽婷, 李仁宏. 聚多巴胺改性碳纤维增强尼龙6复合材料的界面性能[J]. 材料研究学报, 2023, 37(3): 203-210.
[9] 林师峰, 徐东安, 庄艳歆, 张海峰, 朱正旺. TiZr基非晶/TC21双层复合材料的制备和力学性能[J]. 材料研究学报, 2023, 37(3): 193-202.
[10] 苗琪, 左孝青, 周芸, 王应武, 郭路, 王坦, 黄蓓. 304不锈钢纤维/ZL104铝合金复合泡沫的孔结构、力学、吸声性能及其机理[J]. 材料研究学报, 2023, 37(3): 175-183.
[11] 张开银, 王秋玲, 向军. FeCo/SnO2 复合纳米纤维的制备及其吸波性能[J]. 材料研究学报, 2023, 37(2): 102-110.
[12] 周聪, 昝宇宁, 王东, 王全兆, 肖伯律, 马宗义. (Al11La3+Al2O3)/Al复合材料的高温性能及其强化机制[J]. 材料研究学报, 2023, 37(2): 81-88.
[13] 罗昱, 陈秋云, 薛丽红, 张五星, 严有为. 钠离子电池双层碳包覆Na3V2(PO4)3 正极材料的超声辅助溶液燃烧合成及其电化学性能[J]. 材料研究学报, 2023, 37(2): 129-135.
[14] 刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C3N4/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[15] 谢东航, 潘冉, 朱士泽, 王东, 刘振宇, 昝宇宁, 肖伯律, 马宗义. 增强颗粒尺寸对B4C/Al-Zn-Mg-Cu复合材料微观组织及力学性能的影响[J]. 材料研究学报, 2023, 37(10): 731-738.