Please wait a minute...
材料研究学报  2002, Vol. 16 Issue (5): 479-484    
  论文 本期目录 | 过刊浏览 |
几种生物陶瓷材料的裂纹扩展特性
朱平;林忠钦;陈关龙;池田清彦
上海交通大学机械工程学院 日本宫崎大学机械系统工程系
引用本文:

朱平; 林忠钦; 陈关龙; 池田清彦 . 几种生物陶瓷材料的裂纹扩展特性[J]. 材料研究学报, 2002, 16(5): 479-484.

全文: PDF(558 KB)  
摘要: 采用破坏力学中的双扭矩实验法,研究了玻璃陶瓷、云母陶瓷、氧化铝陶瓷、氧化锆陶瓷材料分别在大气、水环境中的静负荷和循环负荷下的裂纹扩展特性,阐明了水环境和循环负荷对材料裂纹扩展特性(KI –V 特性)的影响。所研究的材料在水环境下的裂纹扩展速度的均加快,但玻璃陶瓷和氧化锆陶瓷材料更为明显。在静负荷下这几种材料的裂纹扩展阻力由小到大的次序为:玻璃陶瓷(N-0),玻璃陶瓷(N-11),云母陶瓷,氧化锆陶瓷和氧化铝陶瓷,氧化铝和氧化锆陶瓷材料在循环负荷下的裂纹扩展速度均明显加快。
关键词 陶瓷材料裂纹扩展双扭矩水环境循环负荷    
Key words
收稿日期: 1900-01-01     
1 L.D.Madsen,L.Weaver,Examination of barrier layers for lead zirconate titanate thin films,J.Electron. Mater., 21(1),93(1992)
2 J.Collier,I.A.Cornejo,M.J.Haun,Ferroelectric thick-films for piezoelectric applications,Ferroelectrics, 154(1-4), 47(1994)
3 L.Simon,S.Le Dren,P.Gonnard,G.Pierre,Processing and characterization of PbTiO_3 thick films on alumina sub- strates,J.Electroceram,8(3),215(2002)
4 J.G.E.Gardeniers,A.Smith,C.Cobianu,Characterization of sol-gel PZT films on Ptocoated substrates,J.Mi- cromech.Microeng.,5(2),153(1995)
5 F.H.Huang,L.Che-Yu,Ripening of platinum particles on aluminium oxide,Scripta Metall.,7(12),1239(1973)
6 K.T.Miller,F.F.Lange,D.B.Marshall,The instability of polycrystalline thin films:Experiment and theory,J. Mater.Res.,5(1),151(1990)
7 J.B.Vechembre,G.R.Fox,Sintering of screen-printed plat- inum thick films for electrode applications,J.Mater.Res., 16(4),922(2001)
8 SONG Zhitang,REN Wei,WU Xiaoqing,ZHANG Liangying,YAO Xi,Effect of annealing temperatures on phases and microstructures of Pt and Pt/Ti bottom elec- trodes for ferroelectric thin films,Chinese Journal of Ma- terials Research,11(4),363(1997) (宋志棠,任巍,吴小清,张良莹,姚熹,热处理温度对铁电薄膜底电极Pt和Pt/Ti物相与形貌的影响,材料研究学报,11(4),363(19971)
9 W.W.Jung,S.K.Choi,S.Y.Kweon,S.J.Yeom,Platinum (100) hillock growth in Pt/Ti lectrode stack for SrBi_2Ta_2O_9 ferroelectric random access memory,J.Elec- troceram,13(1-3),55(2004)
10 K.Lucke,K.Detert,A quantitative theory of grain bound- ary motion and recrystallization in metals in the presence of impurities,Acta Metall.,5(11),628(1957)
11 R.E.Hoffman,D.Turnbull,Lattice and grain boundary self-diffusion in silver,J.Appl.Phys.,22(5),634(1951)
12 W.D.Kingery,H.K.Bowen,C.A.Goodwin,Phase bound- aries,phase separation and electrical properties of metal oxide crystalline solutions,Am.Ceram.Soc.Bull.,52(8), 632(1973)
13 M.McLean,E.D.Hondros,A study of grain-boundary grooving at the platinum/alumina interface,J.Mater. Sci.,6(1),19(1971)
14 W.E.Mustain,H.Kim,S.Prakash,J.Stark,T.Osborn, P.A.Kohl,Platinum-glass composite electrode for fuel cell applications,Electrochemical and Solid-State Letters, 10(12),210(2007)
15 Y.S.Yoon,S.H.Kim,S.-J.Lee,H.K.Kim,M.-J.Lee,Fabri- cation and frequency response of dual-element ultrasonic transducer using PZT-5A thick film,Sensor Actuat.A, 125(2),463(2006)
16 K.Yao,X.He,Y.Xu,M.Chen,Screen-printed piezoelec- tric ceramic thick films with sintering additives intro- duced through a liquid-phase approach,Sensor Actuat. A,118(2),342(2005)
[1] 崔璐, 康文泉, 邹方, 魏文澜, 李臻, 王澎. 汽轮机转子10%Cr钢的高温低周疲劳特性[J]. 材料研究学报, 2021, 35(5): 371-380.
[2] 陈刚, 罗小兵, 柴锋, 杨才福, 张正延, 杨志刚. 两次淬火对HSLA钢组织和冲击韧性的影响[J]. 材料研究学报, 2020, 34(9): 705-711.
[3] 刘晓燕, 柳奎君, 杨西荣, 王敬忠, 罗雷. 超细晶纯钛疲劳裂纹的扩展行为[J]. 材料研究学报, 2020, 34(6): 417-424.
[4] 张星硕,王磊,刘杨,王斯堃. 750℃时效对GH4742合金疲劳裂纹扩展行为的影响[J]. 材料研究学报, 2019, 33(10): 721-727.
[5] 王源晨,宋竹满,李瑞,史文博,朱艳坤,张广平. 8.8级螺栓用ML40Cr钢的疲劳性能和裂纹扩展行为[J]. 材料研究学报, 2019, 33(10): 771-775.
[6] 杜永胜, 杨晓薇, 张红霞, 欧阳顺利, 李保卫. 稀土La2O3对尾矿微晶玻璃显微结构和裂纹扩展行为的影响[J]. 材料研究学报, 2018, 32(2): 97-104.
[7] 李振团, 柴锋, 杨才福, 罗小兵, 杨丽, 苏航. 淬火工艺对UHS海工钢力学性能的影响[J]. 材料研究学报, 2018, 32(12): 889-897.
[8] 王军凯, 张远卓, 李赛赛, 葛胜涛, 宋健波, 张海军. Fe催化硅藻土碳热还原反应制备3C-SiC及其机理[J]. 材料研究学报, 2018, 32(10): 767-774.
[9] 刘莹莹, 万隆, 王俊沙. 溶胶凝胶原位成型陶瓷结合剂砂轮中碳化硅的改性[J]. 材料研究学报, 2017, 31(9): 659-664.
[10] 代克顺, 朱黎, 王晗, 肖文凯. 316LN钢焊缝在冲击过程中裂纹扩展行为分析[J]. 材料研究学报, 2017, 31(12): 939-946.
[11] 侯方, 李久楷, 谢少雄, 刘永杰, 王清远, 张军辉. CrMoW转子钢的高温超高周疲劳性能*[J]. 材料研究学报, 2016, 30(7): 481-488.
[12] 梁恩泉, 黄森森, 马英杰, 张韧, 雷家峰, 柳洋. Fe对Ti-6Al-4V ELI合金力学性能的影响[J]. 材料研究学报, 2016, 30(4): 299-306.
[13] 郑三龙, 陈冰冰, 张玮, 高增梁. 挤压AZ31B镁合金圆棒不同取向的疲劳裂纹扩展*[J]. 材料研究学报, 2013, 27(4): 360-366.
[14] 卞贵学 陈跃良 张勇 赵晨. 2A12铝合金疲劳裂纹的成核与扩展机理[J]. 材料研究学报, 2012, 26(5): 521-526.
[15] 宋培龙 杨学锋 王守仁 杨丽颖. Al2O3/TiC--Al2O3/TiC/CaF2自润滑叠层陶瓷的机械和摩擦磨损性能[J]. 材料研究学报, 2012, 26(5): 538-544.