|
|
|
| 用Monte Carlo法模拟纯铜的静态再结晶 |
| 佟铭明;莫春利;李殿中;李依依 |
| 中国科学院金属研究所 |
|
引用本文:
佟铭明; 莫春利; 李殿中; 李依依 . 用Monte Carlo法模拟纯铜的静态再结晶[J]. 材料研究学报, 2002, 16(5): 485-489.
1 A.Julbe,D.Farrusseng,C.Guizard,Porous ceramic mem- branes for catalytic reaction-overview and new ides,J. Membr.Sci.,181,3(2001)
2 HUANG Hujun, HE Yuehui, JIANG Yao, HUANG Baiyun,XU Nanping,Preparation and characteristics of Ti-A1 based alloy Porous Mterial,Chinese Journal of Ma- terials Research,21(4),337(2007) (黄虎军，贺跃辉，江垚，黄伯云，徐南平，Ti-Al系金属间化合物多孔材料的制备与性能，材料研究学报，21(4)，337(2007))
3 H.T.Wang,X.Q.Liu,F.L.Chen,Kinetics and mechanism of a sintering process for macroporous alumina ceramics by extrusion,Journal of the American Ceramic Society, 81(3),781(1998)
4 X.Mao,S.Wang,S.Shimai,Porous ceramics with tri-modal pores prepared by foaming and starch consolidation,Ce- ramics International,34(1),107(2008)
5 YANG Hansong,ZHU Yongchang,LI Muqin,LV Ying, Current situation and development of porous ceramic ma- terial,Journal of Jiamusi University,23(1),88(2005) (杨涵崧，朱永长，李慕勤，吕迎，多孔陶瓷材料的研究现状与进展，佳木斯大学学报，23(1)，88(2005))
6 X.Zhu,D.Jiang,S.Tan,Preparation of silicon carbide reticulated porous ceramics,Materials Science and Engi- neering A,323(1-2),232(2002)
7 G.J.C.Carpenter,Z.S.Wronski,M.W.Phaneuf,TEM study of nanopores and the embrittlement of CVD nickel foam,Materials Science and Technology,20(11), 1421(2004)
8 David G.Morris,Maria A.Mun oz-Morris,Jesus Chao,Development of high strength,high ductility and high creep resistant iron aluminide,Intermetallics,12, 821(2004)
9 C.H.Xu,W.Gao,Y.D.He,High temperature oxidation be- havior of FeA1 intermetallics-oxide scales formed in ambi- ent atmosphere,Scripta Mater.,42,975(2000)
10 F.Q.Lang,Z.M.Yu,S.Gedevanishvili,C.D.Seetharama, A.Toshio,Isothermal oxidation behavior of a sheet alloy of Fe-40at.%Al at temperatures between 1073 and 1473 K,Intermetallics,11,697(2003)
11 F.Q.Lang,Z.M.Yu,S.Gedevanishvili,Sulfidation behavior of Fe-40Al sheet in H2-H2S mixtures at high tempera- tures,Intermetallics,12,469(2004)
12 F.Q.Lang,Z.M.Yu,S.Gedevanishvili,Corrosion behav- ior of Fe-40Al sheet in N_2-11.2O_2-7.5CO_2 atmospheres with various SO_2 contents at 1273 K,Intermetallics,11, 135(2003)
13 D.N.Chan,C.Huvier,J.F.Dinhut,High temperature cor- rosion of some B_2 iron aluminides,Intermetallics,9, 817(2001)
14 M.Amaya,M.A.Espinosa-Medina,J.Porcayo-Calderon,L. Martinez,J.G.Gonzalez-Rodriguez,High temperature corrosion performance of FeA1 intermetallic alloys in molten salts,Mater.Sci.Eng.,A,349,12(2003)
15 X.Amils,J.Nogue(?),,S.Surin(?),M.D.Baro(?),M.A.Mun(?) oz-Morris,D.G.Morris,Hardening and softening of FeA1 during milling and annealing,Intermetallics,8,805(2000)
16 A.Paul,M.J.H.van Dal,A.A.Kodentsov,The Kirkendall effect in multiphase diffusion,Acta Materialia,52, 623(2004)
17 A.Bouayad,C.Gerometta,A.Belkebir,Kinetic interac- tions between solid iron and molten aluminium,Mater. Sci.Eng.A,363,53(2003)
18 R.Nakamura,K.Takasawa,Y.Yamazaki,Single-phase in- terdiffusion in the B2 type intermetallic compounds NiA1, CoAl and FeA1,Intermetallics,10,195(2002)
19 Y.H.He,Y.Jiang,N.P.Xu,J.Zou,B.Y.Huang,C.T.Liu, P.K.Liaw,Fabrication of Ti-A1 micro/nanometer-sized porous alloys through the Kirkendall effect,Adv.Mater., 19,2102(2007)
20 H.Y.Gao,Y.H.He,P.Z.Shen,N.P.Xu,J.Zou,Y.Jiang, B.Y.Huang,C.T.Liu,Effect of heating rate on the pore structure of porous FeA1 alloy,Powder Metallurgy,2008, in press.
21 S.Gedevanishvili,S.C.Deevi,Processing of iron aluminides by pressureless sintering through Fe+Al elemental route, Mater.Sci.Eng.A,325,163(2002)K |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
