Please wait a minute...
材料研究学报  2001, Vol. 15 Issue (6): 654-658    
  论文 本期目录 | 过刊浏览 |
纳米银粒子对聚合物激光离解方式的影响
曾戎;梁海春;容敏智;章明秋;曾汉民
中山大学; 教育部聚合物复合材料及功能材料重点研究实验室
引用本文:

曾戎; 梁海春; 容敏智; 章明秋; 曾汉民 . 纳米银粒子对聚合物激光离解方式的影响[J]. 材料研究学报, 2001, 15(6): 654-658.

全文: PDF(577 KB)  
摘要: 采用激光飞行时间质谱研究了添加纳米银粒子的聚合物PS和PMMA的激光离解方式的变化,发现纳米银粒子导致聚合物炭化, 在两相界面有诱导石墨化的作用;而且纳米银粒子的这种作用与两相的界面相互作用和结构有关.热处理导致纳米银粒子与PMMA的界面反应会改变激光能量的转化方式,从而减弱其激光炭化作用.
关键词 纳米银粒子激光离解飞行时间质谱界面    
Key words
收稿日期: 1900-01-01     
1 YANG Shengrong,JIAN Lingqi,WANG Honggang, Progress in the study of POM self-lubricating materi- als in tribology,Materials for Mechanical Engineering, 28(10),1(2004) (杨生荣,简令奇,王宏刚,聚甲醛润滑材料在摩擦学领域的研究进展,机械工程材料,28(10),1(2004))
2 L.Zsidai,P.De Baets,P.Samyn,G.Kalacska,A.P.Van Pe- teghem,F.Van Parys,The tribological behaviour of en- gineering plastics during sliding friction investigated with small-scale specimens, Wear,253(5-6),673(2002)
3 H.Benabdallah,Friction and wear of blended poly- oxymethylene sliding against coated steel plates,Wear, 254(12),1239(2003)
4 F.Shimin,G.Guosheng,Application of nanoparticles,Ma- terials Review,15,29(2001)
5 H.Hahn,R.Tannebaum,Synthesis,functional properties and applications of nanostructures,Journal of Materials Science,36,550(2002)
6 C.J.Schwartz,S.Bahadur,Studies on the tribological be- havior and transfer film counterface bond strength for polyphenylene sulfide filled with nanoscale alumina par- ticles,Wear,237(2),261(2000)
7 Q.H.Wang,J.F Xu,An investigation of the friction and wear properties of nanometer Si_3N_4 filled PEEK,Wear, 196(1-2),82(1996)
8 ZHANG Renji,FENG Xiancan,Tribological research ad- vance of PEEK and its composites,Chinese Journal of Material Research,16(1),1(2002) (张人佶,冯显灿,聚醚醚酮及其复合材料的摩擦学研究进展,材料研究学报,16(1),1(2002))
9 D.L.Burris,W.G.Sawyer,Improved wear resistance in alumina-PTFE nanocomposites with irregular shaped nanoparticles,Wear,260(7-8),915(2006)
10 Q.H.Wang,Q.J.Xue,W.C.Shen,The friction and wear properties of SiO_2 filled polyether-therketone,Tribology International,30(3),193(1997)
11 P.Bhimaraj,D.L.Burris,J.Action,W.G.Sawyer, C.G.Toney,Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly(ethylene) terephthalate composites,Wear,258(9),1437(2005)
12 H.Cai,F.Y.Yan,Q.J.Xue,W.M.Liu,Investigation of tri- bological properties of Al_2O_3-polyimide nanocomposites, Polymer Testing,22(8),875(2003)
13 WANG Qihua,XUE Qunji,SHEN Weichang,YANG Shengrong,SEM investigations of worn surfaces and trans- fer filims of PEEK filled with nanometer ZrO_2,Chinese Journal of Material Research,13(1),107(1999) (王齐华,薛群基,沈维长,杨生荣,纳米ZrO_2填充PEEK的摩擦表面和转移膜,材料研究学报,13(1),107(1999))
14 L.G.Yu,S.R.Yang,An investigation of the friction and wear behaviors of micrometer copper particle and nanome- ter copper particle filled polyoxymethylene composites, Journal of Applied Polymer Science,77(11),2402(2000)
15 Q.H.Wang,Q.J.Xue,Friction and wear properties of PEEK filled with nano-SiC and micro-SiC,Function Ma- terials,29(5),558(1998)
16 H.T.Wang,W.M.Liu,Study on the friction and wear properties of polyoxymethylene filled Cu powder and Cu(nanometer),Polymeric Materials Science and Engi- neering,13(1),79(1997)
17 B.Z.Wang,L.Chen,Experiment study of three-layer com- posite materials of bearings,Journal of Wuhan University of Technology,17(2),71(1995)/
[1] 王乾, 蒲磊, 贾彩霞, 李志歆, 李俊. 碳纤维/环氧复合材料界面改性的不均匀性[J]. 材料研究学报, 2023, 37(9): 668-674.
[2] 陆益敏, 马丽芳, 王海, 奚琳, 徐曼曼, 杨春来. 脉冲激光沉积技术生长铜材碳基保护膜[J]. 材料研究学报, 2023, 37(9): 706-712.
[3] 刘瑞峰, 仙运昌, 赵瑞, 周印梅, 王文先. 钛合金/不锈钢复合板的放电等离子烧结技术制备及其性能[J]. 材料研究学报, 2023, 37(8): 581-589.
[4] 冯叶, 陈志勇, 姜肃猛, 宫骏, 单以银, 刘建荣, 王清江. 一种NiCrAlSiY涂层对Ti65钛合金板材循环氧化和室温力学性能的影响[J]. 材料研究学报, 2023, 37(7): 523-534.
[5] 张藤心, 王函, 郝亚斌, 张建岗, 孙新阳, 曾尤. 基于界面氢键结构的石墨烯/聚合物复合材料的阻尼性能[J]. 材料研究学报, 2023, 37(6): 401-407.
[6] 姜水淼, 明开胜, 郑士建. 晶界偏析以及界面相和纳米晶材料力学性能的调控[J]. 材料研究学报, 2023, 37(5): 321-331.
[7] 王刚, 杜雷雷, 缪自强, 钱凯成, 杜向博文, 邓泽婷, 李仁宏. 聚多巴胺改性碳纤维增强尼龙6复合材料的界面性能[J]. 材料研究学报, 2023, 37(3): 203-210.
[8] 闫春良, 郭鹏, 周靖远, 汪爱英. Cu掺杂非晶碳薄膜的电学性能及其载流子输运行为[J]. 材料研究学报, 2023, 37(10): 747-758.
[9] 陈瑞志, 刘丽荣, 郭圣东, 张迈, 卢广先, 李远, 赵云松, 张剑. 一种6Re/3Ru镍基单晶高温合金微观组织的稳定性和高温持久性能[J]. 材料研究学报, 2023, 37(10): 721-730.
[10] 谢东航, 潘冉, 朱士泽, 王东, 刘振宇, 昝宇宁, 肖伯律, 马宗义. 增强颗粒尺寸对B4C/Al-Zn-Mg-Cu复合材料微观组织及力学性能的影响[J]. 材料研究学报, 2023, 37(10): 731-738.
[11] 陈开旺, 张鹏林, 李树旺, 牛显明, 胡春莲. 莫来石粉末化学镀镍和涂层的高温摩擦学性能[J]. 材料研究学报, 2023, 37(1): 39-46.
[12] 单位摇, 王永利, 李静, 熊良银, 杜晓明, 刘实. 锆合金表面Cr基涂层的耐高温氧化性能[J]. 材料研究学报, 2022, 36(9): 699-705.
[13] 程红杰, 刘黄娟, 姜婷, 王法军, 李文. 近红外反射超疏水黄色涂层的制备和性能[J]. 材料研究学报, 2022, 36(9): 687-698.
[14] 张鹏, 黄东, 张福全, 叶崇, 伍孝, 吴晃. 中间相沥青基碳纤维石墨化度对Cf/Al界面损伤的影响[J]. 材料研究学报, 2022, 36(8): 579-590.
[15] 杨晓辉, 李克智, 白龙腾, 郭亚威. 不同热解碳界面层厚度C/ZrC-SiC复合材料烧蚀性能及其机理[J]. 材料研究学报, 2022, 36(7): 489-499.