|
|
|
| 新型球状胺基淀粉树脂的合成及性能 |
| 曲荣君1;2;孙言志2;王春华2 |
| 1.天津大学; 2.烟台师范学院烟台师范学院 |
|
引用本文:
曲荣君; 孙言志; 王春华 . 新型球状胺基淀粉树脂的合成及性能[J]. 材料研究学报, 2001, 15(4): 473-478.
1 WANG Quanzhao,LIU Yue,CHEN Zhiliang,BI Jing,Microstructures and mechanical properties of TiC/NiCrMoAITi cermets,Chinese Journal of Materials Research,19(4),354(2005) (王全兆，刘越，陈志亮，毕敬，TiC/NiCrMoAlTi金属陶瓷的微观结构与力学性能，材料研究学报，19(4)，354(2005))
2 E.Gregorova,W.Pabst,J.Stetina,Viscoelastic behavior of ceramic suspensions with carrageena,Journal of The Eu- ropean Ceramic Society,26(7),1185(2006)
3 Huang Xinyou,Zhao Chen,Chen Zhigang,Gao Chunhua, Influence of composition onproperties of medium temper- ature sintering (Ba,Sr)TiO_3 series capacitor ceramics, Journal of Rare Earths,24(6),777(2006)
4 LI Xiaolei,MA Hongan,GUO Wei,LI Jigang,LIU Wan- qiang,ZHENG Youjin,LI Shangsheng,JIA Xiaopeng,Mi- crostructure analysis of aluminum nitride ceramic material prepared by high-pressure sintering,Superhard Meterial Engineering,19(6),30(2007) (李小雷，马红安，郭玮，李吉刚，刘万强，郑友进，李尚升，贾晓鹏，高压烧结A1N陶瓷体材料的微观结构分析，超硬材料工程，19(6)，30(2007))
5 Li Xide,Hu Xiaofang,Synchrotron radiation tomography for reconstruction of layer structures and internal dam- age of composite material,Chinese Journal of Lasers B, B8(6),503(1999)
6 WANG Min,HU Xiaofang,Research on the incom- plete projection data based on synchrotron radiation computed-tomography technology,Optical Technique, 32(6),926(2006) (汪敏，胡小方，基于SR-CT技术的残缺投影数据的研究，光学技术，32(6)，926(2006))
7 M.Ito,S.Ejiri,H Jinnai,Bone structure and mineraliza- tion demonstrated using synchrotron radiation computed tomography (SR-CT) in animal models:preliminary find- ings,Journal of Bone and Mineral Metabolism,21(5), 287(2003)
8 W.Min,H.Xiaofang,W.Xiaoping,Internal microstructure evolution of aluminum foams under compression,Materi- als Research Bulletin,41(10),1949(2006)
9 B.Dominique,G.Damien,H.Jean-Marc,B.Sylvie,E.Jean, First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomogra- phy,Acta Material,53,121(2005)
10 O.Lame,D.Bellet,M.Di Michiel,Bulk observation of metal powder sintering by X-ray synchrotron microtomog- raphy,Acta Materialia,52(4),977(2004)
11 R.L.Coble,(a) Sintering crystalline solids-I intermediate and final state diffusion models,J.Appl.Phys.,32, 787(1961)
12 R.L.Coble,(b) Sintering crystalline solids-II experimen- tal test of diffusion models in powder compacts,J.Appl. Phys.,32,793(1961)
13 SHI Jianlin,Solid state sintering (I)- pore microstruc- tural model and thermodynamic stability,densification equation,Journal of the Chinese Ceramic Society,25(5), 499(1997) (施剑林，固相烧结-Ⅰ气孔显微结构模型及其热力学稳定性，致密化方程，硅酸盐学报，25(5)，499(1997))
14 SHI Jianlin,Solid state sintering (Ⅲ)-experimental study on grain and pore growth,and densification of superfine zirconia powder compacts,Journal of the Chinese Ceramic Society,26(1),1(1998) (施剑林，固相烧结-Ⅲ实验：超细氧化锆素坯烧结过程中的晶粒与气孔生长及致密化行为，硅酸盐学报，26(1)，1(1998)) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
