Please wait a minute...
Chin J Mater Res  2008, Vol. 22 Issue (5): 521-525    DOI:
Research Articles Current Issue | Archive | Adv Search |
SYNTHESIS AND MECHANICAL PROPERITIES OF REACTABLE NANO-SILICA/PA1010 HYBRID COMPOSITES
;;
河南大学特种功能材料重点实验室
Cite this article: 

. SYNTHESIS AND MECHANICAL PROPERITIES OF REACTABLE NANO-SILICA/PA1010 HYBRID COMPOSITES. Chin J Mater Res, 2008, 22(5): 521-525.

Download:  PDF(700KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Reactable nano- silica/PA1010 hybrid composites were prepared by means of melt blending and the mechanical properties , the morphology of the impact, tensile fractured surface of the composites were studied and the mechanism of PA1010 being reinforced and toughened by nano- silica was introduced. The results showed when the content of the nano-silica increased, the tensile modulus of all composites was higher than that of PA1010 matrix, the tensile strength and the break elongation of the composites increased. When the content of the nano-silica was 1 % , the tensile strength of the composite was the highest ; 4% higher than that of PA1010 matrix, the content of the nano-silica was 0.7%, the break elongation,the tensile modulus of the composite were the highest, 17.6%,13.4% higher than that of PA1010 matrix.
Key words:  Polyamide 1010      Nano- Silica      Mechanical Properties      Morphology      
Received:  23 November 2007     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2008/V22/I5/521

1 Guosheng Zhang,Yongjin Li,Deyue Yan,Youyong Xu, Nylon 1010-montmorillonite nanocomposite made by in- tercalating polymerization,J.Polym.Eng.Sci.,43(1), 204(2003)
2 LIU Liguo,GE Shirong,Study on the rolling-tired prop- erty of nylon composites,Lubrication Engineering,11, 28(2006) (刘利国,葛世荣,氧化物/尼龙1010复合材料滚动疲劳行为研究,润滑与密封,11,28(2006))
3 Hailin Zeng,Chao Gao,Yanping Wang,Paul C.P.Watts, Hao Kong,Xiaowen Cui,Deyue Yan,In situ polymeriza- tion approach to multiwalled carbon nanotubes-reinforced nylon 1010 composites:Mechanical properties and crystal- lization behavior,Polymer,47,113(2006)
4 WANG Junxiang,GU Mingyuan,Investigation of effect of CaF_2 filler and carbon fiber on the tribological properties and wear mechanisms of nylon 1010 composites,Polymer Material Science and Engineering,21(3),184(2005) (王军样,顾明元,氟化钙和炭纤维混杂增强尼龙复合材料的摩擦学性能和磨损机理,高分子材料科学与工程,21(3),184(2005))
5 Werner E.van Zyl,Monserrat García,Bernard A.G. Schrauwen,Bart J.Kooi,Jeff Th.M.De Hosson,Henk Verweij,Hybrid polyamide/silica nanocomposites:Syn- thesis and mechanical testing,Macromol.Mater.Eng., 287,1061(2002)
6 Hanan Sertchook,Hila Elimelech,Carina Makarov,Rafail Khalfin,Yachin Cohen,Michael Shuster,Florence Babon- neau,David Avnir,Composite particles of polyethylene @ silica,J.Am.Chem.Soc.,129(1),98(2007)
7 Mohammad M.Hasan,Yuanxin Zhou,Hassan Mahfuz, Shaik Jeelani,Effect of SiO2 nanoparticle on thermal and tensile behavior of nylon-6,Materials Science and Engi- neering A,429,181(2006)
8 I.-J.Kim,O.-S.Kwon,J.B.Park,H.Joo,Synthesis and characterization of ABS/silica hybrid nanocomposites, Current Applied Physics,6S1,e43(2006)
9 X.H.Li,Z.Cao,Z.J.Zhang,H.X.Dang,Surface- modification in situ of nano-SiO_2 and its structure and tribological properties,Appl.Surf.Sci.,22, 7856(2006)
10 Junbo Gao,Bin Zhao,Mikhail E.Itkis,Elena Bekyarova, Hui Hu,Verina Kranak,Aiping Yu,Robert C.Had- don,Chemical engineering of the single-walled carbon nanotube-nylon 6 interface,J.Am.Chem.Soc.,128, 7492(2006)
11 Minzhi Rong,Mingqiu Zhang,Shunlong Pan,Klaus Friedrich,Interracial effects in polypropylene-silica nanocomposites,J.Appl.Polym.Sci.,92,1771(2004)
12 M.Buggy,G.Bradley,A.Sullivan,Polymer-filler interac- tions in kaolin/nylon 6,6 composites containing silane cou- pling agent,Composites:Part A,36,437(2005)
13 J.Jancar,A.Dianselmo,A.T.Dibenedetto,The yield strength of particulate reinforced thermoplastic compos- ites,Polym.Eng.Sci.,32,1394(1992)
14 SONG Bo,HUANG Rui,WEI Gang,ZHENG Mingjia, Preparation and properties of PA6/CaCO_3 nanocompos- ires,Engineering Plastics Application,30(12),2(2002) (宋波,黄锐,魏刚,郑明嘉,PA6/纳米CaCO_3复合材料的制备和性能,工程塑料应用,30(12),2(2002))
15 OU Yuchun,YANG Feng,ZHUANG Yan,QI Zongneng, Study of the polymethyl methacrylate/SiO2 nano compos- ites by in-situ polymerization,Acta Polymerica Sinica,2, 203(1997) (欧遇春,杨锋,庄严,漆宗能,在位分散聚合聚甲基丙烯酸甲酯/二氧化硅纳米复合材料研究,高分子学报,2,203(1997))
16 LI Ying,YU Jian,GUO Zhaoxia,The influence of surface functional groups of nano-SiO2 on nylon 6 in situ poly- merization,Acta Polymerica Sinica,2,239(2003) (李莹,于建,郭朝霞,纳米SiO_2粒子表面官能团对尼龙6原位聚合的影响,高分子学报,2,239(2003)){
[1] MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] QIN Heyong, LI Zhentuan, ZHAO Guangpu, ZHANG Wenyun, ZHANG Xiaomin. Effect of Solution Temperature on Mechanical Properties and γ' Phase of GH4742 Superalloy[J]. 材料研究学报, 2023, 37(7): 502-510.
[3] FENG Ye, CHEN Zhiyong, JIANG Sumeng, GONG Jun, SHAN Yiyin, LIU Jianrong, WANG Qingjiang. Effect of a NiCrAlSiY Coating on Cyclic Oxidation and Room Temperature Tensile Properties of Ti65 Alloy Plate[J]. 材料研究学报, 2023, 37(7): 523-534.
[4] SHI Chang, DU Yuhang, LAI Liming, XIAO Siming, GUO Ning, GUO Shengfeng. Mechanical Properties and Oxidation Resistance of a Refractory Medium-entropy Alloy CrTaTi[J]. 材料研究学报, 2023, 37(6): 443-452.
[5] JIANG Shuimiao, MING Kaisheng, ZHENG Shijian. A Review on Grain Boundary Segregation, Interfacial Phase and Mechanical Property Adjusting-controlling for Nanocrystalline Materials[J]. 材料研究学报, 2023, 37(5): 321-331.
[6] CHEN Zhipeng, ZHU Zhihao, SONG Mengfan, ZHANG Shuang, LIU Tianyu, DONG Chuang. An Ultra-high-strength Ti-Al-V-Mo-Nb-Zr Alloy Designed from Ti-6Al-4V Cluster Formula[J]. 材料研究学报, 2023, 37(4): 308-314.
[7] YE Jiaofeng, WANG Fei, ZUO Yang, ZHANG Junxiang, LUO Xiaoxiao, FENG Libang. Epoxy Resin-modified Thermo-reversible Polyurethane with High Strength, Toughness, and Self-healing Performance[J]. 材料研究学报, 2023, 37(4): 257-263.
[8] ZHAO Yunmei, ZHAO Hongze, WU Jie, TIAN Xiaosheng, XU Lei. Effect of Heat Treatment on Microstructure and Properties of TIG Welded Joints of Powder Metallurgy Inconel 718 Alloy[J]. 材料研究学报, 2023, 37(3): 184-192.
[9] LIU Dongyang, TONG Guangzhe, GAO Wenli, WANG Weikai. Anisotropy of 2060 Al-Li Alloy Thick Plate[J]. 材料研究学报, 2023, 37(3): 235-240.
[10] ZHOU Cong, ZAN Yuning, WANG Dong, WANG Quanzhao, XIAO Bolv, MA Zongyi. High Temperature Properties and Strengthening Mechanism of (Al11La3+Al2O3)/Al Composite[J]. 材料研究学报, 2023, 37(2): 81-88.
[11] YU Cong, CHEN Leping, JIANG Hongxiang, ZHOU Quan, YANG Chenggang. Effect of Deep Cryogenic-Aging Treatment on Microstructure and Mechanical Properties of 7075 Al-alloy[J]. 材料研究学报, 2023, 37(2): 120-128.
[12] ZHOU Yi, TU Qiang, MI Zhonghua. Effect of Preparing Methods on Structure and Properties of Phosphate Glass-ceramics[J]. 材料研究学报, 2023, 37(10): 739-746.
[13] XIE Donghang, PAN Ran, ZHU Shize, WANG Dong, LIU Zhenyu, ZAN Yuning, XIAO Bolv, MA Zongyi. Effect of Reinforced Particle Size on the Microstructure and Tensile Properties of B4C/Al-Zn-Mg-Cu Composites[J]. 材料研究学报, 2023, 37(10): 731-738.
[14] ZHANG Yutuo, ZOU Hao, WANG Pei, LIU Gongmei. Effect of Molybdenum on Mechanical Properties of ZG04CR13Ni4Mo Stainless Steel[J]. 材料研究学报, 2023, 37(1): 65-69.
[15] WANG Wei, ZHOU Shanqi, GONG Penghui, ZHANG Haoze, SHI Yaming, WANG Kuaishe. Effect of Anneal Treatment on Microstructure, Texture and Mechanical Properties of TC4 Alloy Plates[J]. 材料研究学报, 2023, 37(1): 70-80.
No Suggested Reading articles found!