|
|
|
| Effect of the Melt Superheating Treatment on Microstructures of Alloy 690 |
| JIANG Rong, CHEN Bo, HAO Xianchao, LI Shuo, MA Yingche, LIU Kui |
| Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 |
|
Cite this article:
JIANG Rong CHEN Bo HAO Xianchao LI Shuo MA Yingche LIU Kui. Effect of the Melt Superheating Treatment on Microstructures of Alloy 690. Chin J Mater Res, 2012, 26(1): 78-84.
|
|
|
Abstract The optical, scanning and transmission electron microscopes have been used to investigate the effect of the melt superheating treatment (MST) on the microsturctures and Vickers hardness of of alloy 690. The results indicate that the volume fraction and average size of primary TiN decrease as the superheating temperature increases, and its morphology converts from regular blocky to granular. After homogenizing annealing, there is a slight increase in volume fraction of primary TiN, while a moderate decrease in the average size. Additionally, it is found that a great deal of sub-micron Ti(C, N) precipitates dispersedly during recrystallization annealing, and its amount increases with the superheating temperature. These sub-micron Ti(C, N) particles can improve the Vickers hardness of alloy 690 as the strengtheners.
|
|
Received: 25 April 2011
|
|
|
| Fund: Supported by National Natural Science Foundation of China No.50901076. |
| 1 N.El-Bagourya, A.Nofala, Microstructure of an experimental Ni base superalloy under various casting conditions, Mater. Sci. Eng. A, 527(29--30), 7793(2010)2 A.K.Lohar, B.N.Mondal, S.C.Panigrahi, Influence of cooling rate on the microstructure and ageing behavior of as--cast Al--Sc--Zr alloy, J. Mater. Process. Technol., 210(15), 2135(2010)3 F.S.Yin, X.F.Sun, J.G.Li, H.R.Guan, Z.Q.Hu, Effects of melt treatment on the cast structure of M963 superalloy, Scripta Mater., 48(4), 425(2003)4 F.S.Yin a, Q.Zheng, X.F.Sun, H.R.Guan, Z.Q.Hu, Effect of melt treatment on carbides formation in a cast nickel-base superalloy M963, J. Mater. Process. Technol., 183(2--3), 440(2007)5 L.Liu, B.L.Zhen, A.Banerji, W.Reif, F.Sommer, Effect of melt homogenization temperature on the cast structures of IN 738 LC superalloy, Scripta Metal. Mater., 30(5), 593(1994)6 YIN Fengshi, SUN Xiaofeng, LI Yaobiao, YU Yang, ZHENG Qi, GUAN Hengrong, HU Zhuangqi, Effect of melt superheating treatment on the microstructure and high temperature stress rupture properties of M963superalloy, Acta Metall. Sinica, 39(1), 75(2003)(殷凤仕, 孙晓峰, 李耀彪, 于洋, 郑启, 管恒荣, 胡壮麒,熔体过热处理对M963合金组织和高温持久性能的影响, 金属学报, 39(1), 75(2003))7 YU Qian, XIAO Chengbo, SONG Jinxia, WANG Dinggang, XING Zhanping, ZHANG Hongwei, QU Shiyu, LI Qing, Effect of melt treatment time on the microstructure and mechanical properties of cast nickel base superalloy K465, Journal of Aeronautical Materials, 25(1), 1(2005)(余乾, 肖程波, 宋金霞, 王定刚, 邢占平, 张宏炜, 曲士昱, 李青,熔体处理时间对铸态镍基高温合金K465组织与力学性能的影响, 航空材料学报, 25(1), 1(2005))8 J.J.Kai, G.P.Yu, C.H.Tsai, M.N.Liu, S.C.Yao, The effects of heat treatment on the chromium depletion, precipitate evolution, and corrosion resistance of Inconel alloy 690, Metall. Trans. A, 20(10), 2057(1989)9 K.Stiller, J.Nilsson, K.Norring, Structure, chemistry, and stress corrosion cracking of grain boundaries in alloys 600 and 690, Metall. Mater. Trans. A, 27(2), 327(1996)10 R.J.Lemire, G.A.McRae, The corrosion of Alloy 690 in high-temperature aqueous media--thermodynamic considerations, J. Nucl. Mater., 294(1--2), 141(2001)11 R.S.Dutta, R.Tewari, P.K.De., Effects of heat-treatment on the extent of chromium depletion and caustic corrosion resistance of alloy 690, Corros. Sci., 49(2), 303(2007)12 R.S.Dutta, A.Lobo, R.Purandare, S.K.Kulkarni, G.K.Dey., Corrosion behavior of austenitic alloy 690 under anodic and cathodic potentials, Metall. Mater. Trans. A, 33(5), 1437(2002)13 F.J.Meng, J.Q.Wang, E.H.Han, W.Ke, The role of TiN inclusions in stress corrosion crack initiation for Alloy 690TT in high-temperature and high-pressure water, Corros. Sci., 52(3), 927(2010)14 G.E.Fuchs, S.Z.Hayden, The microstructure and tensile properties of nitrogen containing vacuum atomized alloy 690, Scripta Metall. Mater., 25(8), 1483(1991)15 YIN Fengshi, SUN Xiaofeng, QIN Xubo, CHENG Sujuan, GUAN Hengrong, HU Zhuangqi, Analysis of liquid structure of cast nickel base superalloy M963, Acta Metall. Sinica, 39(5), 530(2003)(殷凤仕, 孙晓峰, 秦绪波, 程素娟, 管恒荣, 胡壮麒,M963铸造镍基高温合金的液态结构分析, 金属学报, 39(5), 530(2003))16 WANG Zhen, LI Jinguo, ZHAO Nairen, JINTao, ZHANG Jinghua, Effect of the melt treatment temperature on the melt structure and microstructure of a nickel based single crystal superalloy, Acta Metall. Sinica, 38(9), 920(2002)(王震, 李金国, 赵乃仁, 金涛, 张静华, 熔体处理温度对镍基单晶高温合金熔体结构和凝固组织的影响, 金属学报, 38(9), 920(2002))17 ZHANG Hongbin, LI Shoujun, HU Yaohe, XIE Xishan, WANG Jianzhi, Research on the Inconel 690 alloy for steam generator tube application abroad, Special Steels Technology, 4, 2(2003)(张红斌, 李守军, 胡尧和, 谢锡善, 王剑志,国外关于蒸汽发生器传热管用Inconel690合金研究现状, 特钢技术, 4, 2(2003))18 M.Enomoto, Z.G.Yang, T.Nagano, Calculation of the equilibrium of TiN particles in iron, ISIJ International, 44(8), 1454(2004)19 FU Guoru, Research on solidification segregation in 690 alloy, Master's Thesis, Institute of Metal Research, Chinese Academy of Sciences(1991)(付国如, 690合金的凝固偏析研究, 硕士毕业论文, 中国科学院金属研究所(1991)) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
