Analysis of Microstructure and Properties of Particles Reinforced Cladding Layer on the Steel Surface

Chin J Mater Res

2012, Vol. 26

Issue (1): 55-60 DOI:

论文

Current Issue | Archive | Adv Search

Analysis of Microstructure and Properties of Particles Reinforced Cladding Layer on the Steel Surface

YE Cheng, DU Xiaodong, YANG Haoyu

School of Material Science and Engineering, Hefei University of Technology, Hefei 230009

Cite this article:

YE Cheng DU Xiaodong YANG Haoyu. Analysis of Microstructure and Properties of Particles Reinforced Cladding Layer on the Steel Surface. Chin J Mater Res, 2012, 26(1): 55-60.

Download:

PDF(1105KB)
Export: BibTeX | EndNote (RIS)

Abstract The WC reinforced cladding layer was prepared on the surface of 45 steel argon-arc cladding. The microstructure and properties of cladding layer were investigated. The wear mechanism of cladding layer and the appearance of WC reinforced particles in wear process were analyzed. The results show that the cladding layer is metallurgical bond with substrate and its structure disperses homogeneitily. There are lots of dispersing-distributed WC particles on the surface. And there is an interface reaction between WC particles and matrix. The average microhardness of the cladding layer is higher than that of substrate. The wear resistance of the cladding layer is 18 times higher than that of 45 matrix steel and is double that of the quenched Cr12MoV steel. The surface of the reinforced particles were polished rarely and spalled in wear process.

Key words: metallic materials particle reinforce cladding layer microstructure interface reaction wear resistance

Received: 22 September 2011

ZTFLH:

TG174.442

Fund:

Supported by National Key Basic Research and Development Program of China No.2011CB013402, the Innovation Foundation of Science and Technology No.09C26213404170, and the Key Project for Natural Science of Anhui Education Department No.KJ2009A094.

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	YE Cheng
	DU Xiao-Dong
	YANG Hui-Yu

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2012/V26/I1/55

1 A.Mortensen, I.Jin, Soliddification processing of metal matrix composites, International Materials Reviews, 37(3), 101(1992)

2 V.C.Nardone, K.W.Prewo, On the strength of discontinuous silicon carbide reinforced aluminum composites, Scripta Metallurgica, 20(1), 43(1986)

3 ZHANG Song, ZHU Jingpu, TAN Chaoxin, Laser coating of Ni based-WC alloy on 15MnV steel, Materials Science Progress, 4(2), 168(1990)

(张松, 朱荆璞, 谭朝鑫, 激光熔敷Ni基WC合金, 材料研究进展, 4(2), 168(1990))

4 LIU Dejian, LI Liqun, LI Fuquan, CHEN Yanbinet, WCp/Fe metal matrix composites produced by laser melt injection, Surface & Coatings Technology, 202(9), 1771(2008)

5 LI Fuquan, CHEN Yanbin, LI Liqun, Microstructure and wear property of surface modification layer produced by laser melt injection WC on Q235 steel, Transactions of the China Welding Institution, 31(4), 28(2010)

(李福泉, 陈彦宾, 李俐群, Q235钢表面激光熔注WC涂层的微观组织及耐磨性, 焊接学报, 31(4), 28(2010))

6 Bertrand Ghislaine, Bertrand Pierre, Roy Priscille, Rio Catherine, Mevrel Remy, Low conductivity plasma sprayed barrier coating using hollow PSZ spheres: Correlation between thermo physical properties and microstructure, Surface & Coatings Technology, 202(10), 1994(2008)

7 ZHOU Shengfeng, HUANG Yongjun, ZENG Xiaoyan, HU Qianwu, Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding, Materials Science and Engineering: A, 480(1–2), 564(2008)

8 LIN Yuanching, WANG Shiwei, LIN Yuchang, Analysis of microstructure and wear performance of WC–Ti clad layers on steel, produced by gas tungsten arc welding, Surface & Coatings Technology, 200(7), 2106(2005)

9 Soner Buytoz, Microstructural properties of SiC based hardfacing on low alloy steel surface alloying, Surface & Coatings Technology, 200(12-13), 3734(2006)

10 Soner Buytoz, Mustafa Ulutan, Mustafa Yildirim, Dry sliding wear behavior of TIG welding clad WC composite coatings, Applied Surface Science, 252, 1313(2005)

11 X.H.Wang, S.L.Song, Z.D.Zou, S.Y.Qu, Fabricating TiC particles reinforced Fe-based composite coatings produced by GTAW multi-layers melting process, Materials Science Engineering: A, 441(1–2), 60(2006)

12 ZHOU Xia, BAO Zhiyong, ZHOU Jiyang, MAO Jianzhen, Study on wear resistance of composite alloy reinforced with hard alloy grains for coal crusher, Foundry, 51(10), 603(2002)

(周霞, 鲍志勇, 周继扬, 毛健镇, 磨煤机用硬质颗粒复合合金材料的耐磨性, 铸造, 51(10), 603(2002))

[1]	PAN Xinyuan, JIANG Jin, REN Yunfei, LIU Li, LI Jinghui, ZHANG Mingya. Microstructure and Property of Ti / Steel Composite Pipe Prepared by Hot Extrusion[J]. 材料研究学报, 2023, 37(9): 713-720.
[2]	MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[3]	SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[4]	ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667.
[5]	SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[6]	XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696.
[7]	OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705.
[8]	XU Lijun, ZHENG Ce, FENG Xiaohui, HUANG Qiuyan, LI Yingju, YANG Yuansheng. Effects of Directional Recrystallization on Microstructure and Superelastic Property of Hot-rolled Cu71Al18Mn11 Alloy[J]. 材料研究学报, 2023, 37(8): 571-580.
[9]	XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613.
[10]	LIU Jihao, CHI Hongxiao, WU Huibin, MA Dangshen, ZHOU Jian, XU Huixia. Heat Treatment Related Microstructure Evolution and Low Hardness Issue of Spray Forming M3 High Speed Steel[J]. 材料研究学报, 2023, 37(8): 625-632.
[11]	YOU Baodong, ZHU Mingwei, YANG Pengju, HE Jie. Research Progress in Preparation of Porous Metal Materials by Alloy Phase Separation[J]. 材料研究学报, 2023, 37(8): 561-570.
[12]	REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C₃N₄ Modified Bi₂O₃[J]. 材料研究学报, 2023, 37(8): 633-640.
[13]	WANG Hao, CUI Junjun, ZHAO Mingjiu. Recrystallization and Grain Growth Behavior for Strip and Foil of Ni-based Superalloy GH3536[J]. 材料研究学报, 2023, 37(7): 535-542.
[14]	LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO₂ as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[15]	QIN Heyong, LI Zhentuan, ZHAO Guangpu, ZHANG Wenyun, ZHANG Xiaomin. Effect of Solution Temperature on Mechanical Properties and γ' Phase of GH4742 Superalloy[J]. 材料研究学报, 2023, 37(7): 502-510.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed