Please wait a minute...
Chin J Mater Res  2012, Vol. 26 Issue (1): 61-67    DOI:
论文 Current Issue | Archive | Adv Search |
Effect of Heat Treatments on Fatigue Properties of FV520B Steel Using Infrared Thermography
FAN Junling1,  GUO Xinglin1,  WU Chengwei1,  DENG Dewei2
1.State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024
2.School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024
Cite this article: 

FAN Junling GUO Xinglin WU Chengwei DENG Dewei. Effect of Heat Treatments on Fatigue Properties of FV520B Steel Using Infrared Thermography. Chin J Mater Res, 2012, 26(1): 61-67.

Download:  PDF(1221KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The effects of heat treatments on microstructures and mechanical properties of FV520B stainless steel were investigated. The infrared thermographic method (TM) was used to monitor the external temperature of specimens subjected to fatigue loading in order to fast determine fatigue strengths of the virgin and heat-treated FV520B steels. The relationship between the surface temperature and internal microstructures are closely linked to analyze the damage status for safety evaluation. The metallographic investigation shows that the improvement of mechanical properties of FV520B steel can be attributed to the formation of tempered martensite and secondary phase particles uniformly distributed in the matrix. The fatigue microcracks initiate from the favorably oriented grains at the corner of the specimen surface.
Key words:  metallic material      FV520B martensite stainless steel      infrared thermography      fatigue limit      microstructure     
Received:  06 July 2011     
ZTFLH: 

TG142

 
Fund: 

Supported by Natural National Science Foundation of China No.11072045 and National Key Basic Research and Development Program of China No.2011CB706504.

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2012/V26/I1/61

1 BAI He, WANG Bojian, Progress in chemical composition, process and corrosion resistance of martensite stainless steel, Special Steel, 30(2), 30(2009)

(白鹤, 王伯健, 马氏体不锈钢成分、工艺和耐腐蚀性的进展, 特殊钢,  30(2), 30(2009))

2 XIAO Furen, Influence of intermediate treatment on microstructure and properties of stainless steel FV520B, Transctions of Metal Heat Treatment, 20(4), 35(1999)

(肖福仁, 调整处理对FV520B不锈钢组织与性能的影响, 金属热处理学报,  20(4), 35(1999))

3 LI Guoming, CHEN Shan, CHANG Wanshun, CHEN Xuequn, Effects of aging temperature on performances of martensite percipitation hardening stainless steel, Material & Heat Treatment, 38(8), 129(2009)

(李国明, 陈珊, 常万顺, 陈学群, 时效温度对新型马氏体沉淀硬化不锈钢性能的影响, 材料热处理技术,  38(8), 129(2009))

4 M.P.Luong, Fatigue limit evaluation of metals using an infrared thermographic technique, Mechanics of Materials, 28(1–4), 155(1998)

5 G.Fargione, A.Geraci, G.,La Rosa, A.Risitano, Rapid determination of the fatigue curve by the thermographic method, International Journal of Fatigue, 24(1), 11(2002)

6 F.Cur`a, G.Cuti, R.Senana, A new iteration method for the thermographic determination of fatigue limit in steels, International Journal of Fatigue, 27(4), 453(2005)

7 V.Crupi, E.Guglielmin, M.Maestro, A. Marin`o, Fatigue analysis of butt welded AH36 steel joints: Thermographic Method and design S–N curve, Marine Structures, 22(3), 373(2009)

8 X.L.Guo, J.L.Fan, Y.G.Zhao, Fatigue behavior analysis of cruciform welded joints by infrared thermographic method, Advanced Materials Science, 197–198, 1395(2011)

9 J.L.Fan, X.L.Guo, C.W.Wu, Y.G.Zhao, Research on fatigue behavior evaluation and fatigue fracture mechanisms of cruciform welded joints, Materials Science and Engineering A, 528(29-30), 8417(2011)

10 V.Crupi, G.Chiofalo, E.Guglielmino, Using infrared thermography in low-cycle fatigue studies of welded joints, Welding Joining, 89, 195(2010)

11 X.G.Wang, V.Crupi, X.L.Guo, Y.G.Zhao, Quantitative thermographic methodology for fatigue assessment and stress measurement, International Journal of Fatigue, 32(12), 1970(2010)

12 LI Xinmei, ZOU Yong, ZHANG Zhongwen, ZOU Zengda, Effect of aging temperature on precipitation of Super304H steel, Transactions of Materials and Heat Treatment, 30(6), 51(2009)

(李新梅, 邹勇, 张忠文, 邹增大, 时效温度对Super304H钢析出相的影响, 材料热处理学报,  30(6), 51(2009))

13 K.S.Chan, Roles of microstructures in fatigue crack initiation, International Journal of Fatigue, 32(9), 1428(2010)

14 CHEN Chuanyao, Fatigue and Fracture, 1st ed., (Wuhan, Huazhong University of Science & Technology Press, 2002)

(陈传尧,  疲劳与断裂, 第一版, (武汉, 华中科技大学出版社, 2002))
[1] PAN Xinyuan, JIANG Jin, REN Yunfei, LIU Li, LI Jinghui, ZHANG Mingya. Microstructure and Property of Ti / Steel Composite Pipe Prepared by Hot Extrusion[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[3] SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[4] ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667.
[5] SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[6] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696.
[7] OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705.
[8] XU Lijun, ZHENG Ce, FENG Xiaohui, HUANG Qiuyan, LI Yingju, YANG Yuansheng. Effects of Directional Recrystallization on Microstructure and Superelastic Property of Hot-rolled Cu71Al18Mn11 Alloy[J]. 材料研究学报, 2023, 37(8): 571-580.
[9] XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613.
[10] LIU Jihao, CHI Hongxiao, WU Huibin, MA Dangshen, ZHOU Jian, XU Huixia. Heat Treatment Related Microstructure Evolution and Low Hardness Issue of Spray Forming M3 High Speed Steel[J]. 材料研究学报, 2023, 37(8): 625-632.
[11] YOU Baodong, ZHU Mingwei, YANG Pengju, HE Jie. Research Progress in Preparation of Porous Metal Materials by Alloy Phase Separation[J]. 材料研究学报, 2023, 37(8): 561-570.
[12] REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C3N4 Modified Bi2O3[J]. 材料研究学报, 2023, 37(8): 633-640.
[13] WANG Hao, CUI Junjun, ZHAO Mingjiu. Recrystallization and Grain Growth Behavior for Strip and Foil of Ni-based Superalloy GH3536[J]. 材料研究学报, 2023, 37(7): 535-542.
[14] LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO2 as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[15] QIN Heyong, LI Zhentuan, ZHAO Guangpu, ZHANG Wenyun, ZHANG Xiaomin. Effect of Solution Temperature on Mechanical Properties and γ' Phase of GH4742 Superalloy[J]. 材料研究学报, 2023, 37(7): 502-510.
No Suggested Reading articles found!