Please wait a minute...
Chin J Mater Res  2009, Vol. 23 Issue (3): 311-316    DOI:
论文 Current Issue | Archive | Adv Search |
Influence of ionic liquid and fir powder on properties of phenol-formaldehyde adhesive
GUO Liying;  SHI Tiejun;  LI Zhong;  DUAN Yanpeng
School of Chemical Engineering; Hefei University of Technology; Hefei 230009
Cite this article: 

GUO Liying SHI Tiejun LI Zhong DUAN Yanpeng. Influence of ionic liquid and fir powder on properties of phenol-formaldehyde adhesive. Chin J Mater Res, 2009, 23(3): 311-316.

Download:  PDF(693KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

A kind of composite adhesive of the ionic liquid/fir powder/phenol-formaldehyde (PF) was prepared. Effects of the fir powder and ionic liquid on properties of the composite adhesive were investigated. Curing temperature, chemical structure and thermal stability of the composite adhesive were analyzed by DSC, FTIR and TGA, respectively. The results showed that the fir powder could decrease free formaldehyde effectively of the composite adhesive and the ionic liquid could increase the adhesive properties greatly. Free formaldehyde in the composite adhesive decreased from 1.76% to 0.24% compared to conventional PF adhesive, tensile shear strength increased from 2.16 MPa to 5.39 MPa when the mass ratio of the ionic liquid to fir powder was 10 : 1, and the cured composite adhesive had no crack and was also comparatively transparent. TGA indicated that initial thermal decomposition temperature of the composite adhesive was increased, but the content of residual carbon was decreased. Capture of the fir powder after dissolved in the ionic liquid for formaldehyde and contribution of the ionic liquid to the adhesive properties had been discussed.

Key words:  organic polymer materials      fir powder      ionic liquid      phenol-formaldehyde resin      composite adhesive      tensile shear strength     
Received:  28 November 2008     
ZTFLH: 

O632

 
Fund: 

Supported by National Natural Science Foundation of China No.50773017.

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2009/V23/I3/311

1 N.Jain, A.Kumar, S.Chauhan, Chemical and biochemical transformations in ionic liquids, Tetrahedron, 61, 1015(2005) 2 P.Kubisa, Application of ionic liquids as solvents for polymerization processes, Progress in Polymer Science, 29(1), 3(2004) 3 A.M.Scurto, W.Leitner, Expanding the useful range of ionic liquids: melting point depression of organic salts with carbon dioxide for biphasic catalytic reactions, Chemistry Communication, 35, 3681(2006) 4 D.Weuster-Botz, Process intensification of whole-cell biocatalysis with ionic liquids, Chemical Record, 7(6), 334(2007) 5 K.Nakashima, F.Kubota, T.Maruyama, M.Goto, Ionic liquids as a novel solvent for lanthanide extraction, Analytical Sciences, 19(8), 1097(2003) 6 A.E.Visser, R.P.Swatloski, S.T.Griffin, D.H.Hartman, R.D.Rogers, Liquid/liquid extraction of metal ions in room temperature ionic liquids, Separation Science and Technology, 36(5-6), 785(2001) 7 S.Zein El-Abedin, F.Endres, Electrodeposition of metals and semiconductors in air- and water-stable ionic liquids, Chemphyschem, 7(1), 58(2006) 8 X.B.Lu, Q.Zhang, L.Zhang, J.Li, Direct electron transfer of horseradish peroxidase and its biosensor based on chitosan and room temperature ionic liquid, Electrochemistry Communications, 8(5), 874(2006) 9 GUO Liying, SHI Tiejun, LI Zhong, DUAN Yanpeng, Solubilities of two kinds of imidazolium ionic liquids for fir powder, Journal of Chemical Industry and Engineering, 59(5), 1299(2008) (郭立颖, 史铁钧, 李忠, 段衍鹏, 两种咪唑类离子液体对杉木粉的溶解性能, 化工学报, 59(5), 1299(2008)) 10 D.A.Fort, R.C.Remsing, R.P.Swatloski, P.Moyna, G.Moyna, R.D.Rogers, Can ionic liquids dissolve wood Processing and analysis of lignocellulosic materials with 1-n-butyl-3-methylimidazolium chloride, Green Chemistry, 9(1), 63(2007) 11 I.Kilpel¨ainen, H.B.Xie, A.King, M.Granstrom, S.Heikkinen, D.S.Argyropoulos, Dissolution of wood in ionic liquids, Journal of Agricultural and Food Chemistry, 55(22), 9142(2007) 12 ZHAO Linwu, WANG Chunpeng, LIU Yi, JIN Liwei, WANG Jing, Preparation and application of fast-curing phenol formaldehyde resin, China Forest Products Industry, 27(4), 17(2000) (赵临五, 王春鹏, 刘 奕, 金立维, 王 静, 低毒快速固化酚醛树脂胶研制及应用, 林产工业,  27(4), 17(2000)) 13 LI Yi, YAO Jin, ZHOU Yuankang, WANG Manli, Phenolic resin modified compositely & its application in friction materials, Non-metallic Mines, 28(4), 57(2005) (李 屹, 姚 进, 周元康, 王满立, 复合改性酚醛树脂及其在摩擦材料中的应用, 非金属矿,   28(4), 57(2005)) 14 WANG Chao, HUANG Yudong, JIANG Lihua, ZHENG Liwei, Study on the tetramaleimide modification polyphenyl menthyl siloxane phenolic resin, Acta Material Compositae Sinica, 21(4), 50(2004) (王 超, 黄玉东, 姜丽华, 郑立威, 四马来酰亚胺改性有机硅酚醛树脂性能的研究, 复合材料学报,  21(4), 50(2004)) 15 J.G.Wang, N.Jiang, Q.G.Guo, L.Liu, J.R.Song, Study on the structural evolution of modified phenol  formaldehyde resin adhesive for the high-temperature bonding of graphite, Journal of Nuclear Materials, 348(1–2), 108(2006) 16 ZHANG Qiaoling, Synthesis and characterization of vinyl pivalate, Applied Chemical Industry, 34(9), 579(2005) (张巧玲, 新戊酸乙烯酯的合成及性能表证, 应用化工,  34(9), 579(2005)) 17 LI Aiyang, TANG Yougen, On concrete water reducing agent from modified lignosulfonate, China Pulp & Paper Industry, 27(3), 76(2006) (李爱阳, 唐有根, 改性木质素磺酸盐混凝土减水剂的研究, 中华纸业,   27(3), 76(2006)) 18 LU Zexiang, YUAN Xia, WU Jian, WANG Liangjie, LUO Hean, Synthesis and spectroscopic characterization of N, N-dialkylimidazolium-based ionic liquids, Chemical World, 46(3), 148(2005) (卢泽湘, 袁 霞, 吴 剑, 王良芥, 罗和安, 咪唑类离子液体的合成和光谱表征, 化学世界,  46(3), 148(2005)) 19 PENG Yuanhua, ZENG Xiangqin, LU Hongmei, Purification and application of lignin in urea-formaldehyde resin, Contemporary Chemical Industry, 35(6), 377(2006) (彭园花, 曾祥钦, 卢红梅, 木质素的提纯及其在脲醛树脂胶粘剂中的应用, 当代化工,   35(6), 377(2006)) 20 SHEN Juan, Study on relationships between picea species structures and vibration properties, Doctoral Dissertation, Haerbin, Northeast Forestry University (2001) (沈隽, 云杉属木材构造特征与振动特性参数关系的研究, 博士学位论文, 哈尔滨, 东北林业大学(2001)) 21 JI Qingjuan, LIU Shengping, LIU Min, MA Yuan, ZHAO Chunqiu, Curing behaviors for phenolic resin/wood flor system, Polymer Materials Science and Engineering, 24(3), 41(2008) (季庆娟, 刘胜平, 刘敏, 马 源, 赵春秋, 酚醛树脂/木粉复合体系的固化动力学, 高分子材料科学与工程,   24(3), 41(2008)) 22 L.B.Manfredi, O.Osa, N.G.Fernandez, A Vazquez, Structure-properties relationship for resols with different formaldehyde phenol molar ratio, Polymer, 40(13), 3867(1999)
[1] YE Jiaofeng, WANG Fei, ZUO Yang, ZHANG Junxiang, LUO Xiaoxiao, FENG Libang. Epoxy Resin-modified Thermo-reversible Polyurethane with High Strength, Toughness, and Self-healing Performance[J]. 材料研究学报, 2023, 37(4): 257-263.
[2] LI Hanlou, JIAO Xiaoguang, ZHU Huanhuan, ZHAO Xiaohuan, JIAO Qingze, FENG Caihong, ZHAO Yun. Synthesis of Branched Fluorine-containing Polyesters and their Properties[J]. 材料研究学报, 2023, 37(4): 315-320.
[3] MA Yizhou, ZHAO Qiuying, YANG Lu, QIU Jinhao. Preparation and Dielectric Energy Storage Properties of Thermoplastic Polyimide/Polyvinylidene Fluoride Composite Film[J]. 材料研究学报, 2023, 37(2): 89-94.
[4] SHEN Yanlong, LI Beigang. Preparation of Magnetic Amino Acid-Functionalized Aluminum Alginate Gel Polymer and its Super Adsorption on Azo Dyes[J]. 材料研究学报, 2022, 36(3): 220-230.
[5] LONG Qing, WANG Chuanyang. Thermal Degradation Behavior and Kinetics Analysis of PMMA with Different Carbon Black Contents[J]. 材料研究学报, 2022, 36(11): 837-844.
[6] JIANG Ping, WU Lihua, LV Taiyong, Pérez-Rigueiro José, WANG Anping. Repetitive Stretching Tensile Behavior and Properties of Spider Major Ampullate Gland Silk[J]. 材料研究学报, 2022, 36(10): 747-759.
[7] YAN Jun, YANG Jin, WANG Tao, XU Guilong, LI Zhaohui. Preparation and Properties of Aqueous Phenolic Resin Modified by Organosilicone Oil[J]. 材料研究学报, 2021, 35(9): 651-656.
[8] ZHANG Hao, LI Fan, CHANG Na, WANG Haitao, CHENG Bowen, WANG Panlei. Preparation of Carboxylic Acid Grafted Starch Adsorption Resin and Its Dye Removal Performance[J]. 材料研究学报, 2021, 35(6): 419-432.
[9] SUN Liying, QIAN Jianhua, ZHAO Yongfang. Preparation and Performance of AgNWs -TPU/PVDF Flexible Film Capacitance Sensors[J]. 材料研究学报, 2021, 35(6): 441-448.
[10] TANG Kaiyuan, HUANG Yang, HUANG Xiangzhou, GE Ying, LI Pinting, YUAN Fanshu, ZHANG Weiwei, SUN Dongping. Physicochemical Properties of Carbonized Bacterial Cellulose and Its Application in Methanol Electrocatalysis[J]. 材料研究学报, 2021, 35(4): 259-270.
[11] SU Chenwen, ZHANG Tingyue, GUO Liwei, LI Le, YANG Ping, LIU Yanqiu. Preparation of Thiol-ene Hydrogels for Extracellular Matrix Simulation[J]. 材料研究学报, 2021, 35(12): 903-910.
[12] ZHANG Xiangyang, ZHANG Qiyang, ZHENG Tao, TANG Tao, LIU Hao, LIU Guojin, ZHU Hailin, ZHU Haifeng. Fabrication of Composite Material Based on MOFs and its Adsorption Properties for Methylene Blue Dyes[J]. 材料研究学报, 2021, 35(11): 866-872.
[13] WAN Liying, XIAO Yang, ZHANG Lunliang. Preparation and Properties of PU-DA System Based on Thermoreversible Diels-Alder Dynamic Covalent Bond[J]. 材料研究学报, 2021, 35(10): 752-760.
[14] ZHANG Cuige, HU Liang, LU Zuxin, ZHOU Jiahui. Preparation and Emulsification Properties of Self-assembled Colloidal Particles Based on Alginic Acid[J]. 材料研究学报, 2021, 35(10): 761-768.
[15] HUANG Jian, LIN Chunxiang, CHEN Ruiying, XIONG Wanyong, WEN Xiaole, LUO Xin. Ionic Liquid-assisted Synthesis of Nanocellulose Adsorbent and Its Adsorption Properties[J]. 材料研究学报, 2020, 34(9): 674-682.
No Suggested Reading articles found!