1 D.K.Matlock, V.E.Br(a)utigam, J.G.Speer, Application of the quenching and partitioning (Q&P) process to a medium–carbon high Si microalloyed bar steel, Mater. Sci. Forum, 426–432, 1089(2003)
2 A.M.Streicher, J.G.Speer, D.K.Matlock, B.C.Cooman. Quenching and partitioning response of a Si–added TRIP sheet steel, in: Proceedings of the International Conference on Advanced High–Strength Sheet Steel for Automotive Aplications, J.G.Speer eds. (USA: Warrendale, PA: AIST, 2004) p.51
3 F.Rizzo, A.R.Martins, J.G.Speer, Quenching and partitioning of Ni–added high strength steel, Materials Science Forum, 539–543, 4476(2007)
4 N.Zhong, X.D.Wang, B.X.Huang, Y.H.Rong, L.Wang, Microstructures and mechanical property of quenched and partitioned Fe–C–Mn–Si steel, in: Proc.3rd Inter. Conf. on Advanced Structural Steels (Gyeongju, Korea, Inst. Metals and Materials, 2006) p.885–891
5 B.C.DeCooman, J.G.Speer, Microstructure–properties relationships in quench and partition (Q&P) steel, implications for automotive anti–instrusion applications, in: Proc.3rd Inter. Conf. on Advanced Structural Steels,
(Gyeongju, Korea, Inst. Metals and Materials, 2006) p.798–805
6 XIE Xiqiang, GAO Wentao, SHI Jie, WANG Cunyu, ZHANG Fang, Effect of quenching and partitioning (Q&P) process on structure and mechinal properities of steel 25Si2Ni2, Special Steel, 29(5), 56(2008)
(解西强, 高文涛, 时捷, 王存宇, 张芳, Q$\&$P(淬火+分配)工艺对25Si2Ni2钢组织和力学性能的影响, 特殊钢,  29(5), 56(2008))
7 T.Y.Hsu(Xu Zuyao), New process for steel heat treatment, Heat Treatment, 22(1), 1(2007)
(徐祖耀, 钢热处理的的新工艺, 热处理,  22(1), 1(2007))
8 B.C.DeCooman, Int. Conf. on TRIP–Aided High Strength Ferrous Alloys (Aachen, WMG, 2001) p.13
9 T.Hisakndo, K.Akiyama, K.Matsazawa, Wear mechanism of stainless steel conformed by application of phase–transformation of its and CCD camera, Wear, 238, 168(2000)
10 Emin Bayraktar, Fazal A. Khalid, Christophe Levaillant. Deformation and fracture behaviour of high manganese austenitic steel, Journal of Materials Processing Technology, 147, 2,145(2004)
11 WEI Xicheng, LI Jian, MENG Hua, Tribological characteristics of HSLA TRIP steel containing meta–stable retained austenite, Tribology, 26(1), 49(2006)
(韦习成, 李健, MENG Hua, 含亚稳残余奥氏体HSLA TRIP钢的摩擦磨损性能研究, 摩擦学学报,  26(1), 49(2006))
12 R.Colaco, R.Vilar, On the influence of retained austenite in the abrasive wear behaviour of a laser surface melted tool steel, Wear, 258, 225(2005)
13 A.Sinatora, M.Pohl, E.U.Waldherr, Wear Induced Martensite in High Chromium Cast Iron, Scripta Metallurgica et Materialia, 32(6), 857(1995)
14 Luo Quanshun, Xie Jingpei, Song Yanpei, Effects of microstructures on the abrasive wear behaviour of spheroidal cast iron, Wear, 184, 1(1995)
15 WANG Chunfang, Investigation on microstructural unit controlling the strength and toughness in low alloy martensitic steel, Degree of Doctor of Engineering, Central Iron & Steel Research Institute, 2008
(王春芳, 低合金马氏体钢强韧性组织控制单元的研究, 博士学位论文, 钢铁研究总院, 2008)
16 L.A.Norstrom, On the yield strength of quenched low–carbon lath martensite, Scandinavian Journal of Metallurgy, 5(4), 159(1976)
17 D.P.Koistinen, R.E.Marburger, A general equation prescribing the extent of the austenite–martensite transformation in pure ironcarbon alloys and plain carbon steel, Acta Metall., 7, 59(1959)