|
|
Evolution of precipitated phase during aging treatment in 316L austenitic stainless steel |
DING Xiuping ; LIU Xiong; HE Yanlin; FU Renyu; LI Lin |
School of Materials Science and Engineering; Shanghai University; Shanghai 200072 |
|
Cite this article:
DING Xiuping LIU Xiong HE Yanlin FU Renyu LI Lin. Evolution of precipitated phase during aging treatment in 316L austenitic stainless steel. Chin J Mater Res, 2009, 23(3): 269-274.
|
Abstract The effects of the aging temperature and time on precipitation behavior of 316L austenitic stainless steel were analyzed, and the volume fraction and the sizes of the precipitates were determined. By the thermodynamic calculation with the update database, the results show that the precipitated phase in 316L austenitic stainless steel was M23C6 type carbide after aging at 850℃, and the amount and size of M23C6 were increased with enhanced aging time. After aging at 650℃ for 100 h, the precipitated phase in steel was mainly composed of χ phase.
|
Received: 05 December 2008
|
|
Fund: Supported by National Natural Science Foundation of China No.50671061, the Program for Changjiang Scholars and Innovative Research Team in University No.IRT0739, and Special Scientific Research Foundation for Outstanding Young Teachers in Shanghai. |
1 B.Weiss, R.Stickler, Phase instabilities during high temperature exposure of 316 austenitic stainless steel, Acta Metall., 3(4), 851(1972)
2 Richard Jones, Valerie Randle, Gregory Owen, Carbide precipitation and grain boundary plane selection in overaged type 316austenitic stainless steel, Materials Science & Engineering A, 496, 256(2008)
3 V.Kain, R.C.Prasad, P.K.De, Testing sensitization and predicting susceptibility to intergranular corrosion and intergranular stress corrosion cracking in austenitic stainless steels, Corrosion, 58(1), 15(2002)
4 LU Shiying, ZHANG Tingkai, KANG Xifan, YANG Changqiang, WANG Xi, Stainless Steel, 1st ed. (Beijing, Atomic Energy Press, 1995) p.173
(陆世英, 张廷凯, 康喜范, 杨长强, 王熙, 不锈钢, 第一版 (北京, 原子能出版社, 1995) p.173)
5 E.A Trillo, L.E Murr, A TEM investigation of M23C6 carbide precipitation behavior on varying grain boundary
misorientations in 304 stainless steels, Journal of Materials Science, 33(5), 1263(1998)
6 K.J.Kim, J.Ginsztler, S.W.Nam, The role of carbon on the occurrence of grain boundary serration in an AISI 316
stainless steel during aging heat treatment, Materials Letters, 59, 1439(2005)
7 H.U.Hong, B.S.Rho, S.W.NAM, Correlation of the M23C6 precipitation morphology with grain boundary characteristics in austenitic stainless steel, Materials Science and Engineering, A318, 285(2001)
8 P.Zahumensky, P.Sevc, J.Anovec, Kinetics of growth of M23C6 intergranular precipitates in 18Cr-12Ni-2.5Mo austenitic stainless steel, Kovo. Mater., 37, 108(1999)
9 T.Sourmail, H.K.D.H.Bhadeshia, Modelling simultaneous precipitation reactions in austenitic stainless steels, Computer Coupling of Phase and Thermochemistry, 27, 169(2003) |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|