Chin J Mater Res  1989, Vol. 3 Issue (6): 481-486    DOI:

Current Issue | Archive | Adv Search |

ON SELF-LUBRICATING BEHAVIOR OF Ni-Cu-Re ALLOY AT ELEVATED TEMPERATURE

LI Shizhuo JIANG Xiaoxia YIN Fucheng (Institute of Metal Research;Academia Sinica)M.B.Peterson S.J.Calabrese (Rensselaer Polytechnic Institute;USA)

LI Shizhuo JIANG Xiaoxia YIN Fucheng (Institute of Metal Research;Academia Sinica)M.B.Peterson S.J.Calabrese (Rensselaer Polytechnic Institute;USA). ON SELF-LUBRICATING BEHAVIOR OF Ni-Cu-Re ALLOY AT ELEVATED TEMPERATURE. Chin J Mater Res, 1989, 3(6): 481-486.

Abstract References Related Articles Recommended Metrics Download:  PDF(1349KB)  Export:  BibTeX | EndNote (RIS)       Abstract  Six compositions of Ni-Cu-Re alloys were prepared in vacuumare furnace.The solid solution phase of Re(Ni,Cu)was observed in alloy co-ntaining Re>5at.-% besides single phase of Ni(Cu,Re).The dependence offriction coefficient of alloys with temperature was Key words:  friction      oxide film      rhenium      nickel      Received:  25 December 1989      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1989/V3/I6/481 1 Peterson M B,Calabrese S J,Stupp B.Lubrication with Naturally Occuring Double Oxide Films,Final Report,ONR contract No.N00014-82-C-0247,1982 2 1982;1:105 ~~ [1] LI Linlong, YANG Liqi, XUE Weihai, GAO Siyang, WANG Xu, DUAN Deli, LI Shu. Sliding Friction and Wear between Rare Earth Modified GCR15 Steel against Cage Materials[J]. 材料研究学报, 2023, 37(6): 408-416. [2] ZHANG Min, ZHANG Siqian, WANG Dong, CHEN Lijia. Creep Microstructure Damage and Influence on Re-creep Behavior for a Nickel-based Single Crystal Superalloy[J]. 材料研究学报, 2023, 37(6): 417-422. [3] LI Yanwei, LUO Kang, YAO Jinhuan. Lithium Ions Storage Properties of Ni(OH)2 Anode Materials Prepared with Sodium Dodecyl Sulfate as Accessory Ingredient[J]. 材料研究学报, 2023, 37(6): 453-462. [4] ZHOU Zhangrui, LV Peisen, ZHAO Guoqi, ZHANG Jian, ZHAO Yunsong, LIU Lirong. Stress Rupture Deformation Mechanism of Two "Replacement of Re by W" Type Low-cost Second-generation Nickel Based Single Crystal Superalloys at Elevated Temperatures[J]. 材料研究学报, 2023, 37(5): 371-380. [5] CHEN Ruizhi, LIU Lirong, GUO Shengdong, ZHANG Mai, LU Guangxian, LI Yuan, ZHAO Yunsong, ZHANG Jian. Microstructural Stability and Stress Rupture Property of a 6Re/3Ru Containing Nickel-based Single Crystal Superalloy[J]. 材料研究学报, 2023, 37(10): 721-730. [6] CHEN Kaiwang, ZHANG Penglin, LI Shuwang, NIU Xianming, HU Chunlian. High-temperature Tribological Properties for Plasma Spraying Coating of Ni-P Plated Mullite Powders[J]. 材料研究学报, 2023, 37(1): 39-46. [7] CHEN Jingjing, QIU Xiaolin, LI Ke, YUAN Junjun, ZHOU Dan, LIU Yiwei. Microstructure Evolution and Plastic Removal for Single Crystal Nickel Induced by Particle Scratching: Atomic Simulation Method[J]. 材料研究学报, 2022, 36(7): 511-518. [8] LIANG Shuang, LIU Zhixin, LIU Lirong, LIANG Jinguang, JI Liangbo, SHAO Huayang. Effect of Ru on Creep Properties of a High Tungsten Containing Ni-based Single Crystal Superalloy[J]. 材料研究学报, 2021, 35(9): 694-702. [9] WANG Zhensheng, XIE Wei, PENG Zhen, HE Yingqian, ZENG Yanggen. Environment-induced Brittle Wear Mechanism of K417G Alloy[J]. 材料研究学报, 2021, 35(7): 501-509. [10] LIAO Zexin, LI Chengbo, LIU Shengdan, TANG Jianguo, HUANG Chuanyan, ZHU Xianyan. Effect of Post Aging on Mechanical Properties of Friction Stir Welded 7046 Aluminum Alloy[J]. 材料研究学报, 2021, 35(7): 543-552. [11] WANG Beibei, LIU Yandong, XUE Peng, NI Dingrui, XIAO Bolv, MA Zongyi. Prepration and Mechanical Properties of Ultrafine-grained 6061 Al-alloy by Friction Stir Process[J]. 材料研究学报, 2021, 35(5): 321-329. [12] ZHANG Huichen, QI Xuelian. Super Low Friction Characteristics Initiated by Running-in Process in Water-based Lubricant for Ti-Alloy[J]. 材料研究学报, 2021, 35(5): 349-356. [13] REN Yanjing, ZHANG Xinmeng, XUE Peng, NI Dingrui, XIAO Bolv, MA Zongyi. Fatigue Property of Friction Stir Welded 6005A Al Alloy Profiles[J]. 材料研究学报, 2021, 35(4): 271-276. [14] SHU Delong, YAN Zhi, WANG Daohong, XIE Jun, HOU Guichen, Naicheng SHENG, LI Jinguo, YU Jinjiang, SUN Xiaofeng, ZHOU Yizhou. Influence of C- and B-content on Solidification and High Temperature Stress Rupture Behavior of Nickel-based Superalloy K417G[J]. 材料研究学报, 2021, 35(4): 241-250. [15] YANG Meng, LI Chengbo, LIU Shengdan, YE Lingying, TANG Jianguo, LIAO Zexin. Effect of Artificial Aging on Microstructure and Mechanical Properties of Friction Stir Welded Joint of 7003/7046 Al-alloys[J]. 材料研究学报, 2020, 34(7): 495-504. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed