|
|
碳化硅增强铝基复合材料的力学性能和断裂机制 |
金鹏1; 刘越1;2; 李曙1; 肖伯律1 |
1.中国科学院金属研究所 沈阳 110016
2.东北大学材料与冶金学院 沈阳 110004 |
|
Effects of SiC particle size on tensile property and fracture behavior on particle reinforced aluminum metal matrix composites |
JIN Peng1; LIU Yue1;2; LI Shu1; XIAO Bolv1 |
1.Institute of Metal Research; The Chinese Academy of Sciences; Shenyang 110016
2.School of Material and Metallurgy; Northeastern University; Shenyang 110004 |
引用本文:
金鹏 刘越 李曙 肖伯律. 碳化硅增强铝基复合材料的力学性能和断裂机制[J]. 材料研究学报, 2009, 23(2): 211-214.
,
,
.
Effects of SiC particle size on tensile property and fracture behavior on particle reinforced aluminum metal matrix composites[J]. Chin J Mater Res, 2009, 23(2): 211-214.
1 P.M.Singh, J.J.Leuandowski, Effects of heat treatment and reinforcement size on reinforcement fracture during tension testing of a SiCp discontinuously reinforced aluminum alloy, Metallurgical Transactions A, 24A, 2531(1993)
2 S.H.Chen, T.C.Wang, Size effects in the particlereinforced metal-matrix composites, Acta Mechanica, 157, 113(2001)
3 A.B.Pandey, B.S.Majumdar, D.B.Miracle, Deformation and fracture of a particle reinforced aluminum alloy composite: part I. experiments, Metallurgical and Materials Transactions A, 31A, 921(2000)
4 B.Miracle, Metal matrix composites-From science to technological significance, Composites Science and Technology, 65, 2526(2005)
5 G.M.Janowski, B.J.Pletka, The effect of particle size and volume fraction on the aging behavior of a liquid-phase sintered SiC/aluminum composite, Metallurgical and Materials Transactions A, 26A, 3027(1995)
6 Y.W.Yan, L.Geng, Effects of particle size on deformation behaviour of metal matrix composites, Materials Science and Technology, 23(3), 374(2007)
7 S.G.Song, N.Shi, G.T.Gray Iii, J.A.Roberts, Reinforcement shape effects on the fracture behavior and ductility of particulate-reinforced 6061-Al matrix composites, Metallurgical and Materials Transactions A, 27A, 3739(1996)
8 P.B.Prangnell, S.J.Bames, S.M.Roberts, P.J.Withers, The effect of clustering on damage formation in particulate reinforced MMCs deformed in compression, Key Engineering Materials, 127-131, 937(1997)
9 Preet M. Singh, John J. Lewandowski, Effects of heat treatment and reinforcement size on reinforcement fracture during tension testing of a SiCp discontinuously reinforced aluminum alloy, Metallurgical Transactions A, 24A, 2531(1993)
10 CHENG Ye, XIE Chunsheng, LUAN Uofen, WU Gaohui, Microstructure and properties of sub-micron Al2O3p/Al composites after hot extrusion, Materials for M echanical Engineering, 29(8), 38(2005)
(成 烨, 谢春生, 栾佰峰, 武高辉, 热挤压对亚微米Al2O3p/ 2024A1复合材料组织和性能的影响, 机械工程材料, 29(8), 38(2005))
11 L.Geng, S.J.Qu, T.Q.Lei, Hot extrusion and its effect on microstructure and properties of squeeze casting SiCp/Al composites with lower volume fraction of reinforcement, Key Engineering Materials, 249, 233(2003)
12 L.M.Tham, M.Gupta, L.Cheng, Effect of limited matrixreinforcement interfacial reaction on enhancing the mechanical properties of aluminium silicon carbide composites, Acta Materialia, 49, 3243(2001)
13 R.D.Evans, J.D.Boyd, Near interface microstructure in a SiC/Al composite, Scripta Materialia, 49, 59(2003)
14 V.K.Varma, S.V.Kamat, V.V.Kutumbarao, Tensile behaviour of powder metallurgy processed (Al-Cu-Mg)/SiCp composites, Materials Science and Technology, 17, 93(2001)
15 T.S.Srivatsan, J.Mattingly, Influence of heat treatment on the tensile properties and fracture behaviour of an aluminium alloy ceramic particle composite, Journal of Maerials Science, 28, 611(1993)
16 CHEN Kanghua, FANG Ling, LI Xia, HUANG Dawei, FANG Huachan, Influence of particle failure on strength of SiCp/Al composites, Journal of Central South University (Science and Technology), 39(3), 493(2008)
(陈康华, 方玲, 李侠, 黄大为, 方华婵, 颗粒失效对SiCp/Al复合材料强度的影响. 中南大学学报(自然科学版), 39(3), 493(2008)) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|