Effect of sulfurizing temperature on frictional behavior of tungsten disulfide thin film

Chin J Mater Res

2009, Vol. 23

Issue (3): 332-336 DOI:

论文

Current Issue | Archive | Adv Search

Effect of sulfurizing temperature on frictional behavior of tungsten disulfide thin film

DU Guangyu BA Dechun WANG Xiaoguang

1.Vacuum and Fluid Engineering Research Center of Northeastern University; Shenyang 110004
2.ShenYang HuaXun Vacuum Technology Co.Ltd.; Shenyang 110004

Cite this article:

. Effect of sulfurizing temperature on frictional behavior of tungsten disulfide thin film. Chin J Mater Res, 2009, 23(3): 332-336.

Download:

PDF(662KB)
Export: BibTeX | EndNote (RIS)

Abstract

Tungsten oxide thin films were prepared on 3Cr13 martensite stainless steel, and then the films were sulfurized in a quart heating-furnace with quantitative sulfur at 200, 400, 600 and 800 for 4 h. The effect of the sulfurizing temperature on frictional behavior of the tungsten disulfide thin film was studied. The results showed that the sulfurizing temperatures influenced surface topography and crystallization obviously. But the influence on chemical constitution was not obvious. The frictional behaviour of the stainless steel basal plant subjected to be sulfurized was improved. With the increasing of the sulfurizing temperatures, the fiction coefficient of the films reduced and the fiction coefficient was also influenced by the testing environment and conditions.

Key words: inorganic non-metallic materials tungsten disulfide sulfuration phase analysis friction coefficient

Received: 23 September 2008

ZTFLH:	TB752
	TQ174

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	DU An-Yu

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2009/V23/I3/332

1 LAI Deming, TU Jiangping, ZHANG Shengcai, WANG Qian, PENG Shimin, HE Dannong, Friction and wear properties of sputtered WS2/Ag nanocomposite films in different environments, Tribology, 26, 6(2006) (赖德明, 涂江平, 张升才, 王倩, 彭世敏, 何丹农, 溅射沉积WS2/Ag纳米复合薄膜在不同环境中的摩擦磨损性能研究, 摩擦学学报, 26, 6(2006)) 2 Q.Wang, J.P.Tu, S.C.Zhang, Effect of Ag content on microstructure and tribological performance of WS2–Ag composite films, Surface & Coatings Technology, 201, 1666(2006) 3 S.B.Sadale, S.R.Barman, P.S.Patil, Synthesis of type-II textured tungsten disulfide thin films with bismuth interfacial layer as a texture promoter, Thin Solid Films, 515, 2935(2007) 4 M.Regula, C.Ballif, J.H.Moser, Structural, chemical, and electrical characterisation of reactively sputtered WSx thin films, Thin Solid Films, 280, 67(1996) 5 Claire J. Carmalt, Ivan P. Parkin, Emily S. Peters, Atmospheric pressure chemical vapour deposition of WS2 thin films on glass, Polyhedron, 22, 1499(2003) 6 S.Watanabe, J.Noshiro, S.Miyake, Tribological characteristics ofWS2/MoS2 solid lubricating multilayer films, Surface and Coatings Technology, 183, 347(2004) 7 U.Noshiro, S.Watanabe, T.Sakurai, Friction properties of co-sputtered sulfide/DLC solid lubricating films, Surface & Coatings Technology, 200, 5849(2006) 8 S.B.Sadale, P.S.Patil, Synthesis of type-I textured tungsten disulfide thin films on quartz substrate, Journal of Crystal Growth, 286, 481(2006) 9 S.B.Sadale, S.R.Barman, P.S.Patil, Formation of c texture of tungsten disulfide thin films with nickel, Applied Surface Science, 253, 3489(2007) 10 S.B.Sadale, P.S.Patil, Synthesis and characterization of type-II textured tungsten disulfide thin films by vdWR process with Pb interfacial layer as texture promoter, Journal of Crystal Growth, 290, 363(2006) 11 M.A.Baker, R.Gilmore, C.Lenardi, XPS investigation of preferential sputtering of S from MoS2 and determination of MoSx stoichiometry from Mo and S peak position, Applied Surface Science, 150, 255(1999)

[1]	SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[2]	SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[3]	REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C₃N₄ Modified Bi₂O₃[J]. 材料研究学报, 2023, 37(8): 633-640.
[4]	LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO₂ as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[5]	LI Yanwei, LUO Kang, YAO Jinhuan. Lithium Ions Storage Properties of Ni(OH)₂ Anode Materials Prepared with Sodium Dodecyl Sulfate as Accessory Ingredient[J]. 材料研究学报, 2023, 37(6): 453-462.
[6]	YU Moxin, ZHANG Shuhai, ZHU Bowen, ZHANG Chen, WANG Xiaoting, BAO Jiamin, WU Xiang. Preparation of Nitrogen-doped Biochar and its Adsorption Capacity for Co²⁺[J]. 材料研究学报, 2023, 37(4): 291-300.
[7]	ZHU Mingxing, DAI Zhonghua. Study on Energy Storage Properties of SrSC_0.5Nb_0.5O₃ Modified BNT-based Lead-free Ceramics[J]. 材料研究学报, 2023, 37(3): 228-234.
[8]	LIU Zhihua, YUE Yuanchao, QIU Yifan, BU Xiang, YANG Tao. Preparation of g-C₃N₄/Ag/BiOBr Composite and Photocatalytic Reduction of Nitrate[J]. 材料研究学报, 2023, 37(10): 781-790.
[9]	ZHOU Yi, TU Qiang, MI Zhonghua. Effect of Preparing Methods on Structure and Properties of Phosphate Glass-ceramics[J]. 材料研究学报, 2023, 37(10): 739-746.
[10]	XIE Feng, GUO Jianfeng, WANG Haitao, CHANG Na. Construction of ZnO/CdS/Ag Composite Photocatalyst and Its Catalytic and Antibacterial Performance[J]. 材料研究学报, 2023, 37(1): 10-20.
[11]	FANG Xiangming, REN Shuai, RONG Ping, LIU Shuo, GAO Shiyong. Fabrication and Infrared Detection Performance of Ag-modified SnSe Nanotubes[J]. 材料研究学报, 2022, 36(8): 591-596.
[12]	LI Fulu, HAN Chunmiao, GAO Jiawang, JIANG Jian, XU Hui, LI Bing. Temperature Dependent Luminescence Properties of Graphene Oxide[J]. 材料研究学报, 2022, 36(8): 597-601.
[13]	ZHU Xiaodong, XIA Yangwen, YU Qiang, Yang Daixiong, HE Lili, FENG Wei. Preparation and Characterization of Cu Doped Rutile TiO₂ and Photocatalytic Property[J]. 材料研究学报, 2022, 36(8): 635-640.
[14]	XIONG Tinghui, CAI Wenhan, MIAO Yu, CHEN Chenlong. Simultaneous Epitaxy Growth and Photoelectrochemical Performance of ZnO Nanorod Arrays and Films[J]. 材料研究学报, 2022, 36(7): 481-488.
[15]	MENG Xiangdong, ZHEN Chao, LIU Gang, CHENG Huiming. Controlled Synthesis of CuO Nanoarrays as Efficient Photocathodes for Photoelectrochemical (PEC) for Water Splitting[J]. 材料研究学报, 2022, 36(4): 241-249.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed