Corrosive-Wear Properties of Two NiAl Alloys in Sulfuric Acid Solution

doi:10.11901/1005.3093.2014.659

Chinese Journal of Materials Research

2015, Vol. 29

Issue (8): 595-601 DOI: 10.11901/1005.3093.2014.659

Current Issue | Archive | Adv Search

Corrosive-Wear Properties of Two NiAl Alloys in Sulfuric Acid Solution

Zhensheng WANG^1,^2,^**(

),Shuangshuang YANG¹,Zhen PENG¹,Qingqi TAN¹,Jianting GUO³,Lanzhang ZHOU³

1. Engineering Research Center of Advanced Mining Equipment, Ministry of Education , Hunan University of Science and Technology, Xiangtan 411201, China
2. Hunan Provincial Key Laboratory of National Defense Science and Technology for High Temperature Wear Resistance Materials and Preparation Technology, Hunan University of Science and Technology,Xiangtan 411201, China
3. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China

Cite this article:

Zhensheng WANG,Shuangshuang YANG,Zhen PENG,Qingqi TAN,Jianting GUO,Lanzhang ZHOU. Corrosive-Wear Properties of Two NiAl Alloys in Sulfuric Acid Solution. Chinese Journal of Materials Research, 2015, 29(8): 595-601.

Download:

HTML

PDF(5514KB)
Export: BibTeX | EndNote (RIS)

Abstract

The corrosion wear properties of NiAl-2.5Ta-7.5Cr-x(0, 1)B alloys in 5% H₂SO₄ solution have been investigated at room temperature. The results show that in comparison with NiAl-2.5Ta-7.5Cr alloy, NiAl-2.5Ta-7.5Cr-1B alloy exhibited better corrosion resistance to 5% H₂SO₄ solution with passive current density 0.299(μAcm^-2)and free corrosion potential -0.213 V. For which the key factor is that a passive film could form on the surface of NiAl-2.5Ta-7.5Cr-1B alloy. The corrosion wear rate of NiAl-2.5Ta-7.5Cr-1B alloy decreased 2-8 times compared with NiAl-2.5Ta-7.5Cr alloy. The abrasion erosion mechanism for NiAl-7.5Cr-2.5Ta-1B alloy was dominated by the synergistic effect of corrosion wear and protectiveness of passive film. While that for NiAl-7.5Cr-2.5Ta alloy was mainly corrosion wear and abrasive wear.

Key words: metallic materials NiAl-2.5Ta-7.5Cr alloy NiAl-2.5Ta-7.5Cr-1B alloy H₂SO₄ corrosive wear abrasion mechanism

Received: 10 November 2014

Fund: *Supported by Natural Science Foundation of Hunan Province No.13JJ8015, National Natural Science Foundation of China No. 51101055.

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	Zhensheng WANG
	Shuangshuang YANG
	Zhen PENG
	Qingqi TAN
	Jianting GUO
	Lanzhang ZHOU

URL:

https://www.cjmr.org/EN/10.11901/1005.3093.2014.659 OR https://www.cjmr.org/EN/Y2015/V29/I8/595

Fig.1 SEM-BSE images of alloy (a) NiAl-2.5Ta-7.5Cr, (b) NiAl-2.5Ta-7.5Cr after corrosion, (c) NiAl-2.5Ta-7.5Cr-1B, (d) NiAl-2.5Ta-7.5Cr-1B after corrosion

Fig.2 XRD pattern of two kind NiAl alloys corrosion before (1) and after (2) (a) NiAl-2.5Ta-7.5Cr, (b) NiAl-2.5Ta-7.5Cr-1B

Fig.3 Anodic polarization curves of two kind NiAl alloys in acid solution

Fig.4 Friction and corrosion wear properties of two kind NiAl alloys in acid solution (a) friction coefficient, (b) wear rate

1	GUO Jianting, Ordered Intermetallic Compound NiAl Alloy (Beijing, Science Press, 2003) P75
1	(
2	Noebe R D,Bowman R R, Nathal M V, Physical and mechanical properties of the B2 compound NiAl, Inter Mater Rev, 38(4), 193(1993)
3	Miracle D B,The physical and mechanical properties of NiAl, Acta Metall Mater, 41(3), 649(1993)
4	WANG Zhenshen,GUO Jianting, ZHOU Lanzhan, XIE Yi, SHENG Liyuan, HU Zhuangqi, Investigation of friction and wear behavior of NiAl-based alloys at room temperature, Chinese Journal of materials research, 23(3), 225(2009)
4	(王振生, 郭建亭, 周兰章, 谢亿, 盛立远, 胡壮麒, 三种NiAl材料的室温摩擦磨损性能研究, 材料研究学报, 23(3), 225(2009))
5	Mishra S C,Satapathy Alok, Chhaithanya M, Wear character-istics of plasmasprayed nickel-aluminum composite coatings, Journal of Reinforced Plastics and Composites, 28(23), 2931(2009)
6	WANG Zhenshen,GUO Jianting, ZHOU Lanzhan, SHENG Liyuan, HU Zhuangqi, High temperature wear behavior of NiAl-Cr(Mo)-Ho-Hf eutectic alloy, Acta Metallurgica Sinica, 45(3), 297(2009)
6	(王振生, 郭建亭, 周兰章, 盛立远, 胡壮麒, NiAl-Cr(Mo)-Ho-Hf共晶合金的高温磨损特性, 金属学报, 45(3), 297(2009))
7	WANG Zhenshen,ZHOU Lanzhan, GUO Jianting, HU Zhuangqi. Wear bahavior of in situ composite NiAl-Al2O3-TiC at high temperature, Tribology, 28(6), 497(2008)
7	(王振生, 周兰章, 郭建亭, 胡壮麒, 原位内生NiAl-Al2O3-TiC的高温磨损特性, 摩擦学学报, 28(6), 497(2008))
8	WANG Zhensheng,ZHANG Mengen, YANG Shuangshuang, GUO Jianting, ZHOU Lanzhang, CHEN Zhigang. Microstyucture mechanical friction and wear properties of NiAl-2.5Ta-7.5Cr-1B alloy, Acta Metallurgica Sinica, 49(11), 1325(2013)
8	(王振生, 张孟恩, 杨双双, 郭建亭, 周兰章, 陈志钢, NiAl-2.5Ta-7.5Cr-1B合金的微观组织、力学性能与摩擦磨损特性, 金属学报, 49(11), 1325(2013))
9	WANG Zhenshen,ZHOU Lanzhan, GUO Jianting, ZHANG Guangye, HU Zhuangqi. Friction and wear behavior of NiAl-Cr(Mo)-CrxSy self-lubricating composite, Tribology, 30(6), 589(2010)
9	(王振生, 周兰章, 郭建亭, 张光业, 胡壮麒, NiAl-Cr(Mo)-CrxSy自润滑复合材料的摩擦磨损特性, 摩擦学学报, 30(6), 589(2010))
10	WU Haipeng,L1 wenjing, GUO Li, PAN Yanfei, XU Xiufen, Effect of promoter species and precursors on catalytic activity of alkali metal promoted NiAl mixed oxides for N2O decomposition, Journal of Fuel Chemisry and Technology, 39(7), 550(2011)
10	(武海鹏, 李文静, 郭丽, 潘燕飞, 徐秀峰, 碱金属助剂类型及前驱物对改性NiAl复合氧化物催化分解N2O活性的影响, 燃料化学学报, 39(7), 550(2011))
11	WANG Fengping, KANG Wanli, JING Hemin, Electrochemical fundamentals methods and applications (Beijing, Chemical Industry Press, 2008)p.62)
12	LIU Yonghui, ZHANG Peifen, Principle and Application of Metal Corrosion, (Beijing, Aviation Industry Press, 1993)p.87-88
12	(p.87-88)
13	ZHANG Jingyu,LIU Qingfeng, LIU Qian, Effect of Ti on the ANTI-corrosion property of Zn-Al alloy films, Acta Metallurgica Sinica, 49(10), 1168(2009)
13	(张静玉, 刘庆峰, 刘茜, Ti对Zn-A1合金薄膜耐腐蚀性能的影响, 金属学报, 49(10), 1168(2009))
14	JIANG Xiaoxia, LI Shizhuo, LI Shu, Corrosive Wear of Metals (first edition)(Beijing, Chemical Industry Press, 2003)p.198-308
15	LEI Ali,LI Gaohong, FENG Lajun, DONG Nan, Structure and abradability of Cu-Al2O3 gradient coatings fabricated by plasma spraying, Transaction of the China Welding Institution, 29(5), 65(2008)
15	(雷阿利, 李高宏, 冯拉俊, 董楠, 等离子喷涂Cu-Al2O3梯度涂层的组织与耐磨性析, 焊接学报, 29(5), 65(2008))
16	Postlethwaite J,Tinker E B, Hawrylak M W, Erosion corrosion in slurry pipelines, Corrosion, 30(8), 285(1974)

[1]	MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[2]	SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[3]	ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667.
[4]	SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[5]	XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696.
[6]	OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705.
[7]	XU Lijun, ZHENG Ce, FENG Xiaohui, HUANG Qiuyan, LI Yingju, YANG Yuansheng. Effects of Directional Recrystallization on Microstructure and Superelastic Property of Hot-rolled Cu71Al18Mn11 Alloy[J]. 材料研究学报, 2023, 37(8): 571-580.
[8]	XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613.
[9]	LIU Jihao, CHI Hongxiao, WU Huibin, MA Dangshen, ZHOU Jian, XU Huixia. Heat Treatment Related Microstructure Evolution and Low Hardness Issue of Spray Forming M3 High Speed Steel[J]. 材料研究学报, 2023, 37(8): 625-632.
[10]	YOU Baodong, ZHU Mingwei, YANG Pengju, HE Jie. Research Progress in Preparation of Porous Metal Materials by Alloy Phase Separation[J]. 材料研究学报, 2023, 37(8): 561-570.
[11]	REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C₃N₄ Modified Bi₂O₃[J]. 材料研究学报, 2023, 37(8): 633-640.
[12]	WANG Hao, CUI Junjun, ZHAO Mingjiu. Recrystallization and Grain Growth Behavior for Strip and Foil of Ni-based Superalloy GH3536[J]. 材料研究学报, 2023, 37(7): 535-542.
[13]	LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO₂ as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[14]	QIN Heyong, LI Zhentuan, ZHAO Guangpu, ZHANG Wenyun, ZHANG Xiaomin. Effect of Solution Temperature on Mechanical Properties and γ' Phase of GH4742 Superalloy[J]. 材料研究学报, 2023, 37(7): 502-510.
[15]	GUO Fei, ZHENG Chengwu, WANG Pei, LI Dianzhong. Effect of Rare Earth Elements on Austenite-Ferrite Phase Transformation Kinetics of Low Carbon Steels[J]. 材料研究学报, 2023, 37(7): 495-501.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed