Preparation and Properties of TiC/Ti3SiC2 Foam Ceramics

Chin J Mater Res

2011, Vol. 25

Issue (5): 539-544 DOI:

论文

Current Issue | Archive | Adv Search

Preparation and Properties of TiC/Ti₃SiC₂ Foam Ceramics

GAO Yong, XU Xingxiang, YANG Zhenming, ZHANG Jinsong

Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016

Cite this article:

GAO Yong XU Xingxiang YANG Zhenming ZHANG Jinsong. Preparation and Properties of TiC/Ti₃SiC₂ Foam Ceramics. Chin J Mater Res, 2011, 25(5): 539-544.

Download:

PDF(1040KB)
Export: BibTeX | EndNote (RIS)

Abstract The TiC/Ti3SiC2 foam ceramics was prepared by high frequency induction heating reaction-melting infiltration using polyurethane foam as primary skeleton. The phase composition, microarea chemical content, micro morphology and structure, and apparent anti-compression properties of the foam materials obtained at different processing stages are investigated. The results show that the TiC/Ti3SiC2 foam ceramics consist of 3-D interconnected network frame of TiC, Ti3SiC2, and Ti5Si3 successively formed with the increasing of Ti content. The average apparent compressive strength of the prepared foam materials rises during reaction-melting infiltration, and reaches to 19.4 MPa when TiC/Ti3SiC2 foam ceramics formed.

Key words: inorganic non-metallic materials foam ceramics high frequency induction heating TiC-Ti3SiC2 mechanical properties

Received: 11 August 2011

ZTFLH:

TB321

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	GAO Yong
	XU Xin-Xiang
	YANG Zhen-Meng
	ZHANG Jin-Song

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y2011/V25/I5/539

1 M.W.Barsoum, The MN+1AXN phases: A new class of solids: Thermodynamically stable nanolaminates, Progress in Solid State Chemistry, 28(1–4), 201(2000)

2 M.W.Barsoum, in:Encyclopedia of Materials: Science and Technology, Physical properties of the MAX phases, edited by K.H.J. Buschow, R.W. Cahn, M.C.Flemings, B.Ilschner, E.J.Kramer, S.Mahajan, P. Veyssi`ere (Oxford, Elsevier, 2006)p.1

3 M.W.Barsoum, M.Radovic, in: Encyclopedia of Materials: Science and Technology, Mechanical properties of the MAX phases, edited by K.H.J.Buschow, R.W.Cahn, M.C.Flemings, B.Ilschner, E.J.Kramer, S.Mahajan, P.Veyssi`ere (Oxford, Elsevier, 2004)p.1

4 C.Racault, F.Langlais, R.Naslain, Solid-state synthesis and characterization of the ternary phase Ti3SiC2, Journal of Materials Science, 29(13), 3384(1994)5 P.V.Istomin, A.V.Nadutkin, Yu.I.Ryabkov, B.A.Goldin, Preparation of Ti3SiC2, Inorganic Materials, 42(3), 250(2006)

6 M.W.Barsoum, T.El-Raghy, Synthesis and characterization of a remarkable ceramic: Ti3SiC2, Journal of the American Ceramic Society, 79(7), 1953(1996)

7 GAN Guoyou, CHEN Jingchao, SUN Jialin, ZHOU Xiaolong, CHEN Xiuhua, DU Yan, Stabilized chemical potential diagrams for Ti–Si–C ternary system at 1200 w and their applications, Journal of Kunming University of Science and Technology, 27(1), 34(2002)

(甘国有, 陈敬超, 孙加林, 周晓龙, 陈秀华, 杜焰, Ti--Si--C三元系化学势稳定性相图及其应用, 昆明理工大学学报, 27(1), 34(2002))

8 W.B.Tian, Z.M.Sun, H.Hashimoto, Y.L.Du, Microstructural evolution and mechanical properties of Ti3SiC2–TiC composites, Journal of Alloys and Compounds, 502(1), 49(2010)

9 J.F.Zhang, L.J.Wang, W.Jiang, L.D.Chen, Effect of TiC content on the microstructure and properties of Ti3SiC2-TiC composites in situ fabricated by spark plasma sintering,

Materials Science and Engineering A, 487(1–2), 137(2008)

10 B.Y.Liang, X.Han, Q.Zou, Y.C.Zhao, M.Z.Wang, TiC/Ti3SiC2 composite prepared by mechanical alloying, International Journal of Refractory Metals and Hard Materials, 27(3), 664(2009)

11 S.Konoplyuk, T.Abe, T.Uchimoto, T.Takagi, Ti3SiC2/TiC composites prepared by PDS, Journal of Materials Science, 40(13), 3409(2005)

12 XING Hongwei, CAO Xiaoming, HU Wanping, ZHAO Longzhi, ZHANG Jinsong, Solidification microstructure of 3D–meshy SiC/Cu metalmatrix composites, Chinese Journal of Materials Research, 18(6), 597(2004)

(邢宏伟, 曹小明, 胡宛平, 赵龙志, 张劲松, 三维网络SiC/Cu金属基复合材料的凝固显微组织, 材料研究学报, 18(6), 597(2004))

13 M.Naka, J.C.Feng, J.C.Schuster, Phase stability of SiC against Ti at high temperature, Vacuum, 83(1), 223(2009)

14 M.Naka, J.C.Feng, J.C.Schuster, Phase reaction and diffusion path of the SiC/Ti system, Metallurgical and Materials Transactions A, 28(6), 1385(1997)

15 W.J.J.Wakelkamp, F.J.J.van Loo, R.Metselaar, Phase relations in the Ti–Si–C system, Journal of the European Ceramic Society, 8(3), 135(1991)

16 D.Bandyopadhyay, The Ti–Si–C system (Titanium- Silicon-Carbon), Journal of Phase Equilibria and Diffusion, 25(5), 415(2004)

17 ZHANG Yong, LIN Junpin, LIU Danmei, CHEN Guoliang, The intersinew pores in TiC ceramic foam, Cemented Carbide, 12(3), 146(1995)

(张勇, 林均品, 刘丹梅, 陈国良, 碳化钛泡沫陶瓷的筋内孔隙, 硬质合金, 12(3), 146(1995))

[1]	MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[2]	SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[3]	SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[4]	REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C₃N₄ Modified Bi₂O₃[J]. 材料研究学报, 2023, 37(8): 633-640.
[5]	LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO₂ as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[6]	QIN Heyong, LI Zhentuan, ZHAO Guangpu, ZHANG Wenyun, ZHANG Xiaomin. Effect of Solution Temperature on Mechanical Properties and γ' Phase of GH4742 Superalloy[J]. 材料研究学报, 2023, 37(7): 502-510.
[7]	FENG Ye, CHEN Zhiyong, JIANG Sumeng, GONG Jun, SHAN Yiyin, LIU Jianrong, WANG Qingjiang. Effect of a NiCrAlSiY Coating on Cyclic Oxidation and Room Temperature Tensile Properties of Ti65 Alloy Plate[J]. 材料研究学报, 2023, 37(7): 523-534.
[8]	SHI Chang, DU Yuhang, LAI Liming, XIAO Siming, GUO Ning, GUO Shengfeng. Mechanical Properties and Oxidation Resistance of a Refractory Medium-entropy Alloy CrTaTi[J]. 材料研究学报, 2023, 37(6): 443-452.
[9]	LI Yanwei, LUO Kang, YAO Jinhuan. Lithium Ions Storage Properties of Ni(OH)₂ Anode Materials Prepared with Sodium Dodecyl Sulfate as Accessory Ingredient[J]. 材料研究学报, 2023, 37(6): 453-462.
[10]	JIANG Shuimiao, MING Kaisheng, ZHENG Shijian. A Review on Grain Boundary Segregation, Interfacial Phase and Mechanical Property Adjusting-controlling for Nanocrystalline Materials[J]. 材料研究学报, 2023, 37(5): 321-331.
[11]	YU Moxin, ZHANG Shuhai, ZHU Bowen, ZHANG Chen, WANG Xiaoting, BAO Jiamin, WU Xiang. Preparation of Nitrogen-doped Biochar and its Adsorption Capacity for Co²⁺[J]. 材料研究学报, 2023, 37(4): 291-300.
[12]	CHEN Zhipeng, ZHU Zhihao, SONG Mengfan, ZHANG Shuang, LIU Tianyu, DONG Chuang. An Ultra-high-strength Ti-Al-V-Mo-Nb-Zr Alloy Designed from Ti-6Al-4V Cluster Formula[J]. 材料研究学报, 2023, 37(4): 308-314.
[13]	YE Jiaofeng, WANG Fei, ZUO Yang, ZHANG Junxiang, LUO Xiaoxiao, FENG Libang. Epoxy Resin-modified Thermo-reversible Polyurethane with High Strength, Toughness, and Self-healing Performance[J]. 材料研究学报, 2023, 37(4): 257-263.
[14]	ZHAO Yunmei, ZHAO Hongze, WU Jie, TIAN Xiaosheng, XU Lei. Effect of Heat Treatment on Microstructure and Properties of TIG Welded Joints of Powder Metallurgy Inconel 718 Alloy[J]. 材料研究学报, 2023, 37(3): 184-192.
[15]	ZHU Mingxing, DAI Zhonghua. Study on Energy Storage Properties of SrSC_0.5Nb_0.5O₃ Modified BNT-based Lead-free Ceramics[J]. 材料研究学报, 2023, 37(3): 228-234.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed