CLOSURE EFFECT OF FATIGUE CRACK IN RESIDUAL STRESS FIELD

Chin J Mater Res

1990, Vol. 4

Issue (5): 387-391 DOI:

Current Issue | Archive | Adv Search

CLOSURE EFFECT OF FATIGUE CRACK IN RESIDUAL STRESS FIELD

LIN Li;HU Naisai;HE Jiawen(Xi'an Jiaotong University)

Cite this article:

LIN Li;HU Naisai;HE Jiawen(Xi'an Jiaotong University). CLOSURE EFFECT OF FATIGUE CRACK IN RESIDUAL STRESS FIELD. Chin J Mater Res, 1990, 4(5): 387-391.

Download:

PDF(374KB)
Export: BibTeX | EndNote (RIS)

Abstract Fatigue crack propagation in a compressive residual stress field can be char-acterized with the closure effect.The closure force under cyclic loading as well as crackgrowth rate may be determined by experiments.Results show that the minimun crackgrowth ra

Key words: residual stress fatigue crack crack closure

Received: 25 October 1990

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1990/V4/I5/387

1 Nelson D V.ASTM STP 776,1982:172
2 Parker A P.ASTM STP 776,1982:13
3 本田和男.材料,1982;31(348) :908
4 崔玉华等.西安交通大学学报,1989;23(增刊第2期):334
5 Ritchie R O.Met Trans,1982;13A:937U

[1]	HUANG Yaqi, WANG Dong, LU Yuzhang, XIONG Ying, SHEN Jian. Fatigue Crack Initiation Behavior at Intermediate Temperature under High Stress Amplitude for Single Crystal Superalloy DD413[J]. 材料研究学报, 2021, 35(7): 510-516.
[2]	WANG Guanyi, CHE Xin, ZHANG Haoyu, CHEN Lijia. Low-cycle Fatigue Behavior of Al-5.4Zn-2.6Mg-1.4Cu Alloy Sheet[J]. 材料研究学报, 2020, 34(9): 697-704.
[3]	LIU Xiaoyan, LIU Kuijun, YANG Xirong, WANG Jingzhong, LUO Lei. Fatigue Crack Propagation Behavior of Ultrafine Grained Pure Titanium[J]. 材料研究学报, 2020, 34(6): 417-424.
[4]	Wenjing MA,Zhiguo CHEN,Hongjuan LI,Zhengui YUAN,Ziqiao ZHENG. Process and Mechanism of Novel Heat Treatment for Controlling Residual Stress in Al-Cu-Mg Alloy[J]. 材料研究学报, 2019, 33(6): 435-442.
[5]	Qinglai ZHANG, Yuanyuan HE, Bingxin ZHANG. Characteristic of Warm Laser Shock Peening of ЭП866 Heat Resistant Martensite Stainless Steel[J]. 材料研究学报, 2017, 31(11): 827-832.
[6]	LOU Juhong, YANG Yanqing. Effect of Matrix Properties on Thermal Residual Stress of Fiber Reinforced Ti-matrix Composities[J]. 材料研究学报, 2016, 30(7): 503-508.
[7]	ZHANG Zhichao, WANG Yumin, LI Yufang, BAI Chunguang. Numerical Simulation on Residual Stress of SiC Fiber Reinforced Titanium Matrix Composite[J]. 材料研究学报, 2016, 30(5): 355-364.
[8]	LIANG Enquan, HUANG Sensen, MA Yingjie, ZHANG Ren, LEI Jiafeng, LIU Yang. The Influence of Fe on the Mechanical Properties of Ti-6Al-4V ELI Alloy[J]. 材料研究学报, 2016, 30(4): 299-306.
[9]	Guirong LI,Fangfang WANG,Rui ZHENG,Hongming WANG,Chao HUANG,Fei XUE,Yi ZHU. Microstructural Evolution and Strengthening Mechanism of Al Alloy Matrix Composites by Applied High Pulsed Electromagnetic Field[J]. 材料研究学报, 2016, 30(10): 745-752.
[10]	Xiaogang WANG,Yueyi LI,Hailan WANG,Cunlong ZHOU,Qinxue HUANG. Numerical Modeling for Roller Leveling Process of Bimetal-Plate[J]. 材料研究学报, 2014, 28(4): 308-313.
[11]	Qinglai ZHANG,Yanxin HONG,Rong WANG,Xingcheng LI,Junjian DUAN,ZHANG Yongkang. Effect of Laser Shock Forming on Microstructure and Residual Stress of AZ31 Magnesium Alloy Sheet[J]. 材料研究学报, 2014, 28(3): 166-172.
[12]	ZHANG Xiaoliang, WANG Zhaoxi, QU Baoping, SHI Huiji. Micro Structures and Properties of the Surface with Electrical Discharge Machining for P20 Steel[J]. 材料研究学报, 2013, 27(5): 449-453.
[13]	YUAN Yongli, HE Guoqiu, FAN Kangle, LIU Xiaoshan, ZHU Minhao. Low Cycle Fatigue Behavior of Gray Cast Iron Used for Engine[J]. 材料研究学报, 2013, 27(5): 469-476.
[14]	ZHENG Sanlong CHEN Binbin ZHANG Wei GAO Zengliang. An Experimental Study of Fatigue Crack Growth in Different Orientation of Extruded #br#AZ31B Mg Alloy Bar**[J]. 材料研究学报, 2013, 27(4): 360-366.
[15]	WANG Qingliang SUN Yanmin ZHANG Lei. The Mechanism of Fatigue Crack Initiation of 2024–T3 and 2524–T34 Aluminum Alloys[J]. 材料研究学报, 2011, 25(1): 67-72.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed