Chin J Mater Res  1998, Vol. 12 Issue (6): 598-603    DOI:

Current Issue | Archive | Adv Search |

HIGH UNDERCOOLING AND HEREDITY OF Cu-Ni-Fe ALLOYS IN SPECIAL COATING MATERIALS

GUO Xuefeng;LU Yili;YANG Gencang(State Key laboratory of Solidification processing; Northwestern Polytechnical University;xi'an 710072)

GUO Xuefeng;LU Yili;YANG Gencang(State Key laboratory of Solidification processing; Northwestern Polytechnical University;xi'an 710072). HIGH UNDERCOOLING AND HEREDITY OF Cu-Ni-Fe ALLOYS IN SPECIAL COATING MATERIALS. Chin J Mater Res, 1998, 12(6): 598-603.

Abstract References Related Articles Recommended Metrics Download:  PDF(1246KB)  Export:  BibTeX | EndNote (RIS)       Abstract  By using glass flux and thermal cycling technologies, the undercooling ability and undercooling heredity of Cu-39%Ni-6%Fe and Ni-30%Cu-5%Fe alloys were investigated in the crucible coatings and shell mold coatings. .The experimental results indicated that Key words:  Cu-Ni-Fe alloys      high undercooling      coating      critical undercooling limits      Received:  25 December 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1998/V12/I6/598 1D.M.11。laCh, Mater.Set。Eng.R.112(～5), 177(1994 2T.Z.Kattamis; M.C.Flemings.Mod.Cast, 67, 97(1967) 3J·H·Perep。ho, Mater.Set.Eng, 65t 125(1984) 4L.L.Lny T.J.Raths, M.B.ffebinson,J.Appl.Phys, 83, 682(1982) 5B·Lux,G·Haour,F.Mollard,Metall,38,1235(1981) 6I.A.Wgn, P.R.Sabin, In Smpndlopo 19961 edited by R. D. Kissing6r.(The Mineral Metajs & MaterichSocity 1996) p.497 7A.Ludwig, Mater.Sci.Eng, All8, 299(1994) 8董若景,冶金原理(北京,机械工业出版社,1981)p.110 9H.S.Gerhard, Ady.Ceram.Mater, 2(2), 137(1987) 10M.schwarz, A.Karma, K.Eckler, D.M.Herlach, Phys.Rev.Lett, 73(10), 1380(1994) 11R.Willencker, D.M.HerlaCh, B.Feuerbacller, Mater.Set.Ellg, 98, 85(1988) 12许超,周世圭,玻璃工艺原理(北京,中国建筑工业出版社,1981) P.81 [1] LU Yimin, MA Lifang, WANG Hai, XI Lin, XU Manman, YANG Chunlai. Carbon-base Protective Coating Grown by Pulsed Laser Deposition on Copper Substrate[J]. 材料研究学报, 2023, 37(9): 706-712. [2] FENG Ye, CHEN Zhiyong, JIANG Sumeng, GONG Jun, SHAN Yiyin, LIU Jianrong, WANG Qingjiang. Effect of a NiCrAlSiY Coating on Cyclic Oxidation and Room Temperature Tensile Properties of Ti65 Alloy Plate[J]. 材料研究学报, 2023, 37(7): 523-534. [3] WANG Wei, PENG Yiqing, DING Shijie, CHANG Wenjuan, GAO Yuan, WANG Kuaishe. Tribological Properties of Graphite-based Solid Lubricating Coatings for Ti-6Al-4V Alloy at 500~800oC[J]. 材料研究学报, 2023, 37(6): 432-442. [4] LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280. [5] DU Feifei, LI Chao, LI Xianliang, ZHOU Yaoyao, YAN Gengxu, LI Guojian, WANG Qiang. Preparation of TiAlTaN/TaO/WS Composite Coatings by Magnetron Sputtering and their Cutting Properties on Titanium Alloy[J]. 材料研究学报, 2023, 37(4): 301-307. [6] TIAN Zhigang, LI Xinmei, QIN Zhong, WANG Xiaohui, LIU Weibin, HUNG Yong. Microstructure and Wear Resistance of CoCrFeNiTi x High Entropy Alloy Coating[J]. 材料研究学报, 2023, 37(3): 219-227. [7] WANG Xingping, XUE Wenbin, WANG Wenxuan. High Temperature Steam Oxidation Behavior of Zr-2 Alloy with ZrO2/Cr Composite Coating[J]. 材料研究学报, 2023, 37(10): 759-769. [8] SHAN Weiyao, WANG Yongli, LI Jing, XIONG Liangyin, DU Xiaoming, LIU Shi. High Temperature Oxidation Resistance of Cr Based Coating on Zirconium Alloy[J]. 材料研究学报, 2022, 36(9): 699-705. [9] CHENG Hongjie, LIU Huangjuan, JIANG Ting, WANG Fajun, LI Wen. Preparation and Properties of Near-infrared Reflective Superhydrophobic Yellow Coating[J]. 材料研究学报, 2022, 36(9): 687-698. [10] LI Yufeng, ZHANG Nianfei, LIU Lishuang, ZHAO Tiantian, GAO Wenbo, GAO Xiaohui. Preparation of Phosphorus-containing Graphene and Corrosion Resistance of Composite Coating[J]. 材料研究学报, 2022, 36(12): 933-944. [11] LI Jianzhong, ZHU Boxuan, WANG Zhenyu, ZHAO Jing, FAN Lianhui, YANG Ke. Preparation and Properties of Copper-carrying Polydopamine Coating on Ureteral Stent[J]. 材料研究学报, 2022, 36(10): 721-729. [12] LI Ruiy, XIE Min, ZHANG Yonghe, PEI Xun, LIU Yang, SONG Xiwen. Physical Properties of Er2O3 Doped Gd2(Zr0.8Ti0.2)2O7 Ceramic Materials[J]. 材料研究学报, 2022, 36(1): 49-54. [13] LI Rui, WANG Hao, ZHANG Tiangang, NIU Wei. Microstructure and Properties of Laser Clad Ti2Ni+TiC+Al2O3+CrxSy Composite Coating on Ti811 Alloy[J]. 材料研究学报, 2022, 36(1): 62-72. [14] CHEN Yiwen, WANG Cheng, LOU Xia, LI Dingjun, ZHOU Ke, CHEN Minghui, WANG Qunchang, ZHU Shenglong, WANG Fuhui. Protective Performance of a Novel Inorganic Composite Coatings on CB2 Ferritic Heat Resistant Steel at 650℃ in Oxygen Flow with Water Vapor[J]. 材料研究学报, 2021, 35(9): 675-681. [15] LU Yiliang, DU Yao, WANG Cheng, XIN Li, ZHU Shenglong, WANG Fuhui. Effect of Nano-Al2O3 and -TiO2 Modified Silicone Coatings on High Temperature Oxidation Resistance of 304 Stainless Steel[J]. 材料研究学报, 2021, 35(6): 458-466. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed