Please wait a minute...
Chin J Mater Res  2004, Vol. 18 Issue (6): 593-596    DOI:
Research Articles Current Issue | Archive | Adv Search |
Influence of Nd on the mechanical properties and high temperature creep properties of AM50 magnesium alloy
;;;
1.上海交通大学; 2.兰州理工大学
Cite this article: 

;. Influence of Nd on the mechanical properties and high temperature creep properties of AM50 magnesium alloy. Chin J Mater Res, 2004, 18(6): 593-596.

Download:  PDF(1202KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Nd was added to AM50 magnesium alloys to study the microstructure, mechanical properties and creep resistance properties. The specimens were heated at 420℃ for 12 h followed by quenching, and the results show that addition of small amount of Nd to AM50 magnesium alloys resulted in the refinement of grain.The RT trengthening mechanism of alloys containing Nd was mainly from the fine grain strengthening. Nd in AM50 exists in the form of Al$_{11}$Nd$_{3}$ that is thermal stable phase. Due to the existing of Al$_{11}$Nd$_{3}$, the steady state creep rate decreased greatly at the temperature 200℃ and the elevated temperature mechanical property (150℃) were increased.
Key words:  metallic materials      AM50 alloy      creep      mechanical properties      
Received:  29 December 2004     
ZTFLH:  TG146  
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2004/V18/I6/593

1 Robert Brown, Light Metal Age, 56, 86(1998)
2 PENG Liming, ZENG Xiaoqin, ZHU Yanping, DING Wenjiang, Chinese Journal of Materials Research, 17(1), 97(2003) (彭立明,曾小勤,朱燕萍,丁文江,材料研究学报,17(1),97(2003))
3 Robert E. Bob Brown, Light Metal Age, 56, 94(1998)
4 P.Humble, Materials Forum, 21, 45(1997)
5 YUAN Guangyin, SUN Yangshan, ZHANG Weiming, Trans. Nonferrous Met. Soc. China, 10(4), 469(2000)
6 Y.Carbonneau, A.Couture, Van Neste, Metallurgical and Materials Transactions A, 29A, 1759(1998)
7 B.Bronfin, M.Katsir, E.Aghion, Materials Science and Engineering A, 302, 46(2001)
8 X.F.Huang, H.Zhou, Z.M.He, J. Rare Earth, 21(1), 73(2003)
9 J.J.Kim, K.H.Kim, K.S.Shin, Scripta Materialia, 41(3), 333(1999)
10 I.J.Polmear, Materials Transaction JIM, 12(9), 741(1996)
11 I.J.Polmear, Materials Science and Technology, 10(1), 1(1994)
12 G.Pettersen, H.Westengen, R.Hoier, Materials Science and Engineering A, 207, 115(1996)
[1] MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] XU Lijun, ZHENG Ce, FENG Xiaohui, HUANG Qiuyan, LI Yingju, YANG Yuansheng. Effects of Directional Recrystallization on Microstructure and Superelastic Property of Hot-rolled Cu71Al18Mn11 Alloy[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] LIU Jihao, CHI Hongxiao, WU Huibin, MA Dangshen, ZHOU Jian, XU Huixia. Heat Treatment Related Microstructure Evolution and Low Hardness Issue of Spray Forming M3 High Speed Steel[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] YOU Baodong, ZHU Mingwei, YANG Pengju, HE Jie. Research Progress in Preparation of Porous Metal Materials by Alloy Phase Separation[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C3N4 Modified Bi2O3[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] WANG Hao, CUI Junjun, ZHAO Mingjiu. Recrystallization and Grain Growth Behavior for Strip and Foil of Ni-based Superalloy GH3536[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO2 as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] QIN Heyong, LI Zhentuan, ZHAO Guangpu, ZHANG Wenyun, ZHANG Xiaomin. Effect of Solution Temperature on Mechanical Properties and γ' Phase of GH4742 Superalloy[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] FENG Ye, CHEN Zhiyong, JIANG Sumeng, GONG Jun, SHAN Yiyin, LIU Jianrong, WANG Qingjiang. Effect of a NiCrAlSiY Coating on Cyclic Oxidation and Room Temperature Tensile Properties of Ti65 Alloy Plate[J]. 材料研究学报, 2023, 37(7): 523-534.
No Suggested Reading articles found!