Please wait a minute...
Chinese Journal of Materials Research  2012, Vol. 26 Issue (6): 632-636    DOI:
Current Issue | Archive | Adv Search |
Investigation of Deformation and Recrystallization in a Directionally Solidified Superalloy
SHEN Jian1,3,  PU Sheng2,3,  REN Jianjun4,  XUE Xinqiang4,  BI Kewen4,   LU Yuzhang3,  WANG Li3,  XIE Guang3
1.School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110178
2.State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083
3.Superalloys Division, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016
4.Shenyang Zhongke Sannai New Materials Co., Ltd., Shenyang 110000
Cite this article: 

SHEN Jian PU Sheng REN Jianjun XUE Xinqiang BI Kewen LU Yuzhang WANG Li XIE Guang. Investigation of Deformation and Recrystallization in a Directionally Solidified Superalloy. Chinese Journal of Materials Research, 2012, 26(6): 632-636.

Download:  PDF(821KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Distribution of strain and subsequent recrystallization (RX) around indentation in a directionally solidified superalloy DZ125L have been investigated by electron back scatter diffraction (EBSD) and other experimental method. The results show that distribution of strain was extremely homogenous. Deformed area increased with increasing of the load, which resulted in the larger region of RX. According to the distribution of strain on the section of indentation and the critical strain of RX at a certain temperature tested by experiment, RX depth with different load at this temperature can be forecasted.

Key words:  metallic materials      directionally solidified superalloy      recrystallization      EBSD      indentation     
Received:  07 September 2012     
ZTFLH:  TG142  
Fund: 

Supported by National Natural Science Foundation of China No.50901079.

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2012/V26/I6/632

1 HUANG Qianyao, LI Hankang, Superalloys (Beijing, Metallurgical Industry Press, 2002) p.32

(黄乾尧, 李汉康,  高温合金  (北京, 冶金工业出版社, 2002) p.32)

2 T.Khan, P.Caron, Y.G.Nakagawa, Mechanical behavior and processing of DS and single crystal superalloys, J. Met., 16(1986)

3 G. Xie, L. Wang, J. Zhang, L.H. Lou, Influence of recrystallization on the high temperature properties of a directionally solidified Ni-base superalloy, Metall. Mater. Trans. A, 39A, 206(2008)

4 G. Xie, L. Wang, J. Zhang, L.H. Lou, High temperature creep of directionally solidified Ni-base superalloys containing local recrystallization, in: Superalloys 2008, edited by R. C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, S.A. Woodard, (New York, TMS, 2008) p.453

5 G. Xie, L. Wang, J. Zhang, L.H. Lou, Intermediate temperature creep of directionally solidified Ni-based superalloy containing local recrystallization, Mater. Sci. Eng. A. 528, 3062(2011)

6 L. Wang, G. Xie, J. Zhang, L.H. Lou, On the role of carbides during recrystallization of a directionally solidified Ni-base superalloy, Scripta Mater., 55, 457(2006)

7 M.Okazaki, T.Hiura, T.Suzuki, Effect of local cellular transformation on fatigue small crack growth in CMSX- 4 and CMSX-2 at high temperature, in: Superalloys 2000, edited by T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. Mclean, S. Olson, J.J. Schirra, (New York, TMS, 2000) p.505

8 S.D. Bond, J.W. Martin, Surface recrystallization in a single crystal nickel-based superalloy, J. Mater. Sci., 19, 867(1984)

9 C. Zambaldi., F. Roters, D. Raabe, U. Glatzel, Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy, Mater. Sci. Eng. A, 454–455, 433(2007)

10 G. Xie, L.Wang, J. Zhang, L.H. Lou, Orientational dependence of recrystallization in a Ni-base single-crystal superalloy, Scripta Mater., 66, 378(2012).

11 YE Yinpeng, Investigation of Recrystallization Behavior of Directionally Solidified Nickel-base Superalloy DZ17G, Master’s thesis, Northeastern University (2007).

(叶印鹏, 定向凝固镍基高温合金DZ17G再结晶行为研究, 硕士学位论文, 东北大学(2007))

[1] MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] XU Lijun, ZHENG Ce, FENG Xiaohui, HUANG Qiuyan, LI Yingju, YANG Yuansheng. Effects of Directional Recrystallization on Microstructure and Superelastic Property of Hot-rolled Cu71Al18Mn11 Alloy[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] LIU Jihao, CHI Hongxiao, WU Huibin, MA Dangshen, ZHOU Jian, XU Huixia. Heat Treatment Related Microstructure Evolution and Low Hardness Issue of Spray Forming M3 High Speed Steel[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] YOU Baodong, ZHU Mingwei, YANG Pengju, HE Jie. Research Progress in Preparation of Porous Metal Materials by Alloy Phase Separation[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C3N4 Modified Bi2O3[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] WANG Hao, CUI Junjun, ZHAO Mingjiu. Recrystallization and Grain Growth Behavior for Strip and Foil of Ni-based Superalloy GH3536[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO2 as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] QIN Heyong, LI Zhentuan, ZHAO Guangpu, ZHANG Wenyun, ZHANG Xiaomin. Effect of Solution Temperature on Mechanical Properties and γ' Phase of GH4742 Superalloy[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] GUO Fei, ZHENG Chengwu, WANG Pei, LI Dianzhong. Effect of Rare Earth Elements on Austenite-Ferrite Phase Transformation Kinetics of Low Carbon Steels[J]. 材料研究学报, 2023, 37(7): 495-501.
No Suggested Reading articles found!