| 1 ZHANG Yonggang, HAN Yafang, CHEN Guoliang, GUO Jianting, WAN Xiaojing, FENG Di, Structural Intermetallics (Beijing, National Defence Industry Press, 2003) p.418(张永刚, 韩雅芳, 陈国良, 郭建亭, 万晓景, 冯 涤, 金属间化合物结构材料 (北京,国防工业出版社, 2003) p.4182 ZHANG Chunfu, LUO Heli, CHEN Beijing, LI Shangping, FENG Di, SU Liwei, Abrasive wear resistance study of Ni3Al-based alloy and its composite, Chinese High Technology Letters, 12(4), 47(2002) (张春福, 骆合力, 陈蓓京, 李尚平, 冯 涤, 苏立潍, Ni3Al基合金及其复合材料抗磨粒磨损行为研究, 高技术通讯, 12(4), 47(2002))3 Bern H, Koch S, High temperature sliding abrasion of a nikel-base alloy and composite, Wear, 225-229, 154(1999) 4 LI Shangping, FENG Di, LUO Heli, LIU junqiu, Solution and precipitation of chromium carbide during the fabricated process of Cr7C3/Ni3Al composite, Acta Materiae Compositae Sinica, 22(4), 53(2005)(李尚平, 冯 涤, 骆合力, 刘君秋, Cr7C3/Ni3Al复合材料制备过程中碳化铬的溶解再析出行为, 复合材料学报, 22(4), 53(2005))5 Blau P J, Devore C E, Sliding friction and wear properties of several nikel aluminide alloys under dry and lubricated conditions, Tribology International, 23(4), 226(1990)6 GU Guorong, LUO Heli, LI Shangping, LIU Peiying, FENG Di, Microstructure and abrasive wear resistance of Cr3C2/Ni3Al composite, Journal of Aeronautical Materials, 27(4), 50(2007)(顾国荣, 骆合力, 李尚平, 刘培英, 冯 涤, Cr3C2/Ni3Al复合材料的组织与耐磨性能, 航空材料学报, 27(4), 50(2007))7 Peiqing La, Qunji Xue, Weimin Liu, Effects of boron doping on tribological properties of Ni3Al-Cr7C3 coatings under dry sliding, Wear, 249, 94(2001)8 Peiqing La, Qunji Xue, Weimin Liu, Tribological properties of Ni3Al–Cr7C3 composite coating under water lubrication, Tribology International, 33, 469(2000)9 Y.F.Li, J.T.Guo, L.Z.Zhou, H.Q.Ye, Effect of recrystallization on room-temperature mechanical properties of Zrdoped Ni3Al alloy, Materials Letters, 58, 1853(2004)10 LI Yufang, Effect of Zr on the Mechanical Properties of Ni3Al and Ductility Mechanism, doctoral dissertation, Institute of Metal Research Chinese Academy of Sciences(2004)(李玉芳, 合金元素Zr对Ni3Al力学行为的影响及韧化机制的研究, 博士学位论文, 中国科学院金属研究所(2004))11 E.R.Thompson, F.D.Lemkey, Structure and properties of Ni3Al–gamma prime– eutectic alloys produced by unidirectional solidification, Trans. ASM, 62, 140(1969)12 Guo Jianting, Gu Yuefeng, Lin Dongliang, Effects of Zr on Grain Boundary and Mechanical Properties in Ni3Al Alloys, Acta metallurgica sinica, 31(3), 120(1995)(郭建亭, 谷月峰, 林栋梁, Zr对Ni3Al晶界及力学性能的影响, 金属学报, 31(3), 120(1995))13 F.P Bowden, D.Tabor, Chen Shaoli, Yuan Hanchan, Ding Xuejia, The Friction and Lubrication of Solids (Beijing, China Machine PRESS,1982) p.66,130(F.P.鲍登, D.泰伯著, 陈绍澧, 袁汉昌, 丁雪加译, 固体的摩擦与润滑 (北京, 机械工业出版社, 1982) p.66,13014 WANG Zhensheng, ZHOU Lanzhang, GUO Jianting, ZHANG Guangye, LI Huiqiang, HU Zhuangqi, Friction and wear properties of NiAl-Cr(Mo)-CrxSy self-lubricating composite. Tribology, 30(6), 589(2010)(王振生, 周兰章, 郭建亭, 张光业, 李会强, 胡壮麒, NiAl--Cr(Mo)--CrxSy自润滑复合材料的摩擦磨损特性, 摩擦学学报, 30(6), 589(2010))15 WANG Zhensheng, GUO Jianting, ZHOU Lanzhang, SHENG Liyuan, HU Zhuangqi, High temperature wear bahavior of a NiAl-Cr(Mo)-Ho-Hf eutectic alloy, Acta metallurgica sinica, 45(3), 297(2009)(王振生, 郭建亭, 周兰章, 盛立远, 胡壮麒, NiAl--Cr(Mo)--Ho--Hf共晶合金的高温磨损特性, 金属学报, 45(3), 297(2009))16 WANG Zhensheng, ZHOU Lanzhang, GUO Jianting, SHENG Liyuan, HU Zhuangqi, High temperature wear bahavior of in situ composite NiAl-Al2O3-TiC, Tribology, 28(6), 497(2008)(王振生, 周兰章, 郭建亭, 胡壮麒, 原位内生NiAl--Al2O3--TiC的高温磨损特性, 摩擦学学报, 28(6), 497(2008))17 Bharat Bhushan, Introduction to Tribology (Beijing, China Machine Press, 2007) p.192(B.布尚, 葛世荣译, 摩擦学导论 (北京, 机械工业出版社, 2007) p.192) |
