| 1 J.E.A.Starke, J.T.Staley, Application of modern aluminum alloys to aircraft, Progress in Aerosapce Science, 32, 131(1996)2 J.C.Williams, E.A.Starke, Progress in structural materials for aerospace systems, Acta Materialia, 51(19), 5775(2003)3 J.D.Robson, Microstructural evolution in aluminium alloy 7050 during processing, Materials Science and Engineering A, 382(1–2), 112(2004)4 O.N.Senkov, M.R.Shagiev, S.V.Senkova, D.B.Miracel, Precipitation of Al3(Sc,Zr) particles in an Al–Zn–Mg–Cu–Sc–Zr alloy during conventional solution heat treatment and its effect on tensile properties, Acta Materialia, 56, 3723(2008)5 L.Z.He, X.H.Li, X.T.Liu, X.J.Wang, H.T.Zhang, J.Z.Cui, Effects of homogenization on microstructures and properties of a new type Al–Zn–Mg–Cu–Ti–Er alloy, Materials Science and Engineering, A527, 7510(2010)6 K.H.Chen, H.C.Fang, Z.Zhang, X.Chen, G.Liu, Effect of of Yb, Cr and Zr additions on recrystallization and corrosion resistance of Al–Zn–Mg–Cu alloys, Materials Science and Engineering, A497, 426(2008)7 L.M.Wu, W.H.Wang, Y.F.Hsu, S.Trong, Effects of homogenization treatment on recrystallization behavior and dispersoid distribution in an Al–Zn–Mg–Cu–Sc–Zr alloy, Journal of Alloys and Compounds, 456, 163(2008)8 K.E.Knipling, R.A.Karnesky, C.P.Lee, D.C.Dunand, D.N.Seidman, Precipitation evolution in Al–0.1Sc and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging, Acta Materialia, 58, 5184(2010)9 M.J.Jones, F.J.Humphreys, Interaction of recrystallization and precipitation: The effect of Al3Sc on the recrystallization behavior of deformed aluminium, Acta Materialia, 51, 2149(2003)10 J.Wloka, S.Virtanen, Influence of scandium on the pitting behavior of Al–Zn–Mg–Cu alloys, Acta Materialia, 55, 6666(2007)11 HE Yongdong, ZHANG Xinming, YOU Jianghai, Effcts of minor contents of Sc and Zr on microstructure and mechanical properties of Al–Zn–Mg–Cu alloy, Rare Metal Materials and Engineering, 36(4), 665(2007)(贺永东, 张新明, 游江海, 复合添加微量Sc, Zr对Al--Zn--Mg--Cu合金组织性能的影响, 稀有金属材料与工程, 36(4), 665(2007))12 O.Engler, E.Sachot, J.C.Ehrstrom, A.Reeves, R.Shahani, Rectystallisation and texture in hot deformed aluminum alloy 7010 thick plates, Materials Science and Technology, 12, 717(1996)13 B.Morere, C.Maurice, J.Driver, R.Shahani, Microstructural characterization of a 7010 alloy after hot deformation and solution treatment, Materials Science Forum, 217–222, 517(1996)14 XIONG Chuangxian, DENG Yunlai, WAN Li, ZHANG Xinming, Evolutions of microstructures and textures of 7050 Al alloy plate during solution heat treatment, The Chinese JournaI of Nonferrous Metais, 20(3), 428(2010)(熊创贤, 万 里, 邓运来, 张新明, Al--7.8Zn--1.6Mg--1.8Cu合金铸锭及其均匀化的微结构研究. 中国有色金属学报, 41(2), 466(2010))15 H.J.Bunge, Texture Analysis in Materials Science, first edition (Berlin, Butterworth, 1982) p.120 16 L¨ucke K, Pospiech J, Virnich K H, Jura J, On the problem of the reproduction of the true orientation distribution from pole figures, Acta Metall, 29, 167(1981)17 HE Yongdong, ZHANG Xinming, CHEN Jianmei, TANG Jianguo, Refinement mechanism of trace Sc and Zr as–cast 7A55 alloys, Journal of Central South University (Scienceand Technology), 36(6), 919(2005)(贺永东, 张新明, 陈健美, 唐建国, 微量Sc和Zr对7A55合金铸锭组织的细化机理, 中南大学学报(自然科学版), 36(6), 919(2005))18 H.E.Hu, L.Zhen, L.Yang, W.Z.Shao, B.Y.Zhang, Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation, Materials Science and Engineering A, 488, 64(2008)19 L.Zhen, H.Hua, X.Y.Wang, B.Y.Zhang, W.Z.Shao, Distribution characterization of boundary misorientation angle of 7050 aluminum alloy after high–temperature compression, Journal of materials processing technology, 209, 754(2009)20 N.P.Jin, H.Zhang, Y.Han, W.X.Wu, J.H.Chen, Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature, Materials Characterization, 60, 530(2009)21 Y.L.Deng, L.Wan, Y.Zhang, X.M.Zhang, Evolution of microstructures and textures of 7050 Al alloy hot–rolled plate during staged solution heat–treatments, Journal of Alloys and Compounds, 498(1), 88(2010)22 ZHANG Yunya, DENG Yunlai, WAN Li, ZHANG Xinming, Effects of thermalmechanical treatment on the microstructures and properties of an Al–Zn–Mg–Cu alloy plate, Acta Metallurgica Sinica, 47(10), 1027(2011)(张云崖, 邓运来, 万 里, 张新明, 形变热处理对Al--Zn--Mg--Cu合金板材组织与性能的影响, 金属学报, 47(10), 1027(2011)) |
