|
|
|
| Microstructure Characteristics and Strength-toughness of X100 Pipeline Steel |
| DUAN Linna1,2, LIU Qingyou2, JIA Shujun2, JIA Chengchang1, TAN Fengliang2,3 |
1.School of Material Science and Engineering, University of Science and Technology Beijing, Beijing 100083
2.Institute for Structural Materials of CISRI, Beijing 100081
3.Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093 |
|
Cite this article:
DUAN Linna LIU Qingyou JIA Shujun JIA Chengchang TAN Fengliang. Microstructure Characteristics and Strength-toughness of X100 Pipeline Steel. Chin J Mater Res, 2012, 26(4): 443-448.
|
|
|
Abstract The effects of microstructure, precipitate and grain size on strength and toughness of X100 hot rolled strips steel were investigated by means of optical icroscope, scanning electronic microscopy (SEM), transmission electron microscopy (TEM) and electron backscattered diffraction (EBSD) in this article. The results show that average effective grain size of X100 pipeline steel with reasonable composition design reaches to 2.38 μm after selected thermo-mechanical control process (TMCP), and there are a great quantity of dislocations and substructures in grains. Microstructure of X100 strips mainly consists of granular bainite, lath bainite with plenty of fine M/A islands dispersing in the matrix or on grain boundaries. Fine precipitation particles can pin dislocation effectively, tensile strength of tested steel are higher than 970 MPa, yield strength are higher than 800 MPa, Charpy impact energy (higher than −40oC) are higher than 250 J, and ductile brittle transition temperature is between −40oC and −60oC .
|
|
Received: 16 April 2012
|
|
|
| 1 Tanguy B, Plastic and Damage Behavior of a High Strength X100 Pipeline Steel: Experiments and Modeling, Int J Pressure Vessels Piping, 85(5), 322(2008)2 LIAO Bo, XIAO Furen, Research on Microstructure and Strength2toughening Mechanism of Acicular Ferrite Pipeline Steel, Transactions of Materials and Heat Treatment, 30(2),57(2009)(廖 波, 肖福仁, 针状铁素体管线钢组织及强韧化机理研究, 材料热处理学报, 30(2), 57(2009))3 SUN Jun, Boyd J D. Effect of Thermomechanical Processing on Antisotropy of Cleavage Fracture stress in Microalloyed Linepipe Steel. International Journal of Pressure Vessels and Piping, 77, 367(2000)4 Cotrina E, Iza-Mendia A, L´opez B, Study of the Ferrite Grain Coarsening behind the Transformation front by Electron Backscattered Diffraction Technique, Metall Mater Trans A, 35(3), 98(2004)5 SUN Hong, Metallurgical Design and Development of High Deformable X100 Line Pipe Steels Suitable for Strain-Based Design, Welded Pipe and Tube, 33(8), 68(2010)(孙 宏, 基于应变设计的大应变X100管线钢的成分设计与开发, 焊管, 33(8), 68(2010))6 Hiroshi Tamehiro, High Strength X80 and X100 Line Pipe Steels, International Convention “Pipelines: The Energy Link”, 28(1996)7 FANG Hongsheng, YANG Zhigang, YANG Jibo, BAI Bingzhe Research on Bainite Transformation in Steels, Acta Metallurgica Sinica, 41(5), 449(2005)(方鸿生, 杨志刚, 杨金波, 白秉哲, 钢中贝氏体相变机制的研究, 金属学报, 41(5), 449(2005))8 JI Haitao, WANG Xiaoxiang, MA Yajing, ZHANG Junfeng, Specification and Production of X100 Test Line Pipe, Welded Pipe and Tube, 34(4), 66(2010)(纪海涛, 王晓香, 马亚静, 张军峰, X100试验管线钢管的规范和生产, 焊管, 34(4), 66(2010))9 Elwazri A M, Varno R, Siciliano F, Ef fect of Cool Deformation on Mechanical Properties of a High-Strength Pipe-line Steel, Metallurgical and Materials Transactions A, 36(11), 2929(2005)10 Shanmugam S , Misra R D K, Hartmann J, Microstructure of High Strength Niobium Containing Pipeline Steel, Materials Science and Engineering A, 441(1-2), 215(2006)11 ZHAO Mingchun, YANG Ke, XIAO Furen, Continuous Cooling Transformation of Undeformed and Deformed Low Carbon Pipeline Steels, Materials Science and Engineering A, 335A(1-2), 131(2003)12 ZHOU Min, MA Qiuhua, DU Linxiu, LIU Xianghua. Microstructure and Mechanical Properties of Pipeline Steel X100[J]. Journal of Northeastern University, 30(7), 987(2009)(周 民, 马秋花, 杜林秀, 刘相华, X100管线钢的组织性能, 东北大学学报, 30(7), 987(2009))13 YANG Jinghong, Investigation on Microstructure Control of Low Caron High Nb-bearing Pipeline Steel, (Beijing¡ University of Science and Technology Beijing, 2008) p.17(杨景红, 低碳高铌管线钢组织细化的控制研究, (北京, 北京科技大学, 2008) p.17)14 YONG Qilong, Secondary Phases in Steels, (Beijing, Metallurgical Industry Press, 2006) p.15(雍岐龙, 钢铁材料中的第二相, (北京, 冶金工业出版社, 2006) p.15)15 Diza F M, Iza M A, Gutierrez I, Analysis of Different Acicular Ferrite Microstructures in Low-Carbon Steels by Electron Backscattered Diffraction, Metall Mater Trans, 34A(11), 2511(2003)16 Hwang B, Kim Y G, Lee S, Effective Grain size and charpy Impact Properties of High-Toughness X70 Pipeline Steels, Metall Mater Trans, 36A(8), 2113(2005) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
