Please wait a minute...
Chin J Mater Res  2004, Vol. 18 Issue (4): 443-448    DOI:
Research Articles Current Issue | Archive | Adv Search |
Laser--induced combustion synthesis of amorphous--containing Zr--Ti--Al--Ni alloys
;;
大连理工大学
Cite this article: 

. Laser--induced combustion synthesis of amorphous--containing Zr--Ti--Al--Ni alloys. Chin J Mater Res, 2004, 18(4): 443-448.

Download:  PDF(1606KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Zr--Ti--based alloys were designed according to the electron concentration ($e/a$) and average atomic size rules. All the compositions satisfy the same electron concentration $e/a$=1.5 and average atomic radius 0.1496 nm as those of the Zr$_{60}$Al$_{20}$Ni$_{20}$ bulk metallic glasses (BMG). A new technique, laser--induced combustion synthesis (LCS) technique, was applied to fabricate these alloys. The LCS products mainly consist of intermetallic phases, but in Zr$_{55}$Ti$_{10.8}$Al$_{17.1}$Ni$_{17.1}$ and Zr$_{50}$Ti$_{21.6}$Al$_{14.2}$Ni$_{14.2}$ the amorphous phases are found. The hardness and tribology characters are closely related to the phase content. In general, the more the amorphous phase, the lower the hardness and the higher the average friction coefficient.
Key words:  metallic materials      Zr--Ti--Al--Ni alloys      combustion synthesis      amorphous alloys      
Received:  01 September 2004     
ZTFLH:  TG193  
  TN249  
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2004/V18/I4/443

1 HE Guo, CHEN Guoliang, Chinese Journal of Materials Research, 13, 569(1999) (何国,陈国良,材料研究学报,13, 569(1999) )
2 Cunshan Wang, Linhui Gao, Gang Li, Yanfang Wang, Yuanliang Xia, S.Bysakh, Chuang Dong, Journal of Materials Science, 38, 1377(2003)
3 L.Q.Xing, P.Ochin, M. Harmelin, F.Faudot, J.Bigot, J.P.Chevalier, Materials Science and Engineering A, 220, 155(1996)
4 ZHAO Deqian, ZHUANG Yanxin, ZHANG Yong, PAN Mingxiang, WU Guangheng, MENG Liqin, WANG Weihua, Acta Metallurgica Sinica, 36, 329(2000) (赵德乾,庄艳歆,张勇,潘明样,呈光桓,孟丽琴,汪卫华,金属学报,36,329(2000) )
5 A.Peker, W.L.Johnson, Appl. Phys. Lett., 63, 2342(1993)
6 W.R.Chen, Y.M.Wang, J.B.Qiang, C.Dong, Acta Mater, 51, 1899(2003)
7 CHEN Weirong, WANG Yingmin, QIANG Jianbing, XU Weiping, WANG Dehe, DONG Chuang, Chinese Journal of Materials Research, 16, 219(2002) (陈伟荣,王英敏,(?)建兵,徐卫平,王德和,董闯,材料研究学报,16, 219(2002) )
8 A.Inoue, T.Zhang, T.Masumoto, Mater. Trans. JIM, 31, 177(1990)
[1] MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] XU Lijun, ZHENG Ce, FENG Xiaohui, HUANG Qiuyan, LI Yingju, YANG Yuansheng. Effects of Directional Recrystallization on Microstructure and Superelastic Property of Hot-rolled Cu71Al18Mn11 Alloy[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] LIU Jihao, CHI Hongxiao, WU Huibin, MA Dangshen, ZHOU Jian, XU Huixia. Heat Treatment Related Microstructure Evolution and Low Hardness Issue of Spray Forming M3 High Speed Steel[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] YOU Baodong, ZHU Mingwei, YANG Pengju, HE Jie. Research Progress in Preparation of Porous Metal Materials by Alloy Phase Separation[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C3N4 Modified Bi2O3[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] WANG Hao, CUI Junjun, ZHAO Mingjiu. Recrystallization and Grain Growth Behavior for Strip and Foil of Ni-based Superalloy GH3536[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO2 as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] QIN Heyong, LI Zhentuan, ZHAO Guangpu, ZHANG Wenyun, ZHANG Xiaomin. Effect of Solution Temperature on Mechanical Properties and γ' Phase of GH4742 Superalloy[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] GUO Fei, ZHENG Chengwu, WANG Pei, LI Dianzhong. Effect of Rare Earth Elements on Austenite-Ferrite Phase Transformation Kinetics of Low Carbon Steels[J]. 材料研究学报, 2023, 37(7): 495-501.
No Suggested Reading articles found!