Please wait a minute...
Chin J Mater Res  2004, Vol. 18 Issue (3): 251-256    DOI:
Research Articles Current Issue | Archive | Adv Search |
Preparation and blood compatibility of polyurethane films blending and grafting with heparin in the same solvent system
;;
北京理工大学
Cite this article: 

. Preparation and blood compatibility of polyurethane films blending and grafting with heparin in the same solvent system. Chin J Mater Res, 2004, 18(3): 251-256.

Download:  PDF(1983KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Heparin homogeneously mixed with polyurethane in the co--solvent of tetrahydrofuran and water through adjusting the ratio of the two solvents. After the film was prepared with casting method, heparin was homogeneously blended in polyurethane films. At the same time, through preaction of heparin with 1--(3-dimethyl aminoprophyl)--3--ethylcarbodimide hydrochloride (DCCI), heparin partly grafted with the residual of polyurethane and the films containing free and covalent heparin was obtained using solvent casting. The heparin release rate was investigated with toluidine blue heparin assay (TBHA). The blood compatibility of polyurethane films was assessed with thrombin time (TT), prothrombin time (PT) and activated partial thromboplastin time (APTT). The results indicated that polyurethane containing heparin showed expected blood compatibility and polyurethane containing free and covalent heparin had the excellent bioactivity of free heparin and the long--term blood compatibility of covalent heparin.
Key words:  organic polymer materials      antithrombin      covalent      heparin      polyurethane      blending      
Received:  19 July 2004     
ZTFLH:  TG324  
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2004/V18/I3/251

1 Han Joo-Hyun,Kim Chun-Gon,Low earth orbit space environment simulation and its effects on graphite/epoxy composites,Composite Structures,72(2),218(2006)
2 G.Bitetti,M.Marchtti,S.Mileti,F.Valente,S.Scaglione, Degradation of the surfaces exposed to the space envi- ronment,Acta Astronautica,60(3),166(2007)
3 D.P.Dworak,M.D.Soucek,Protective space coatings:a ceramer approach for nanoscale materials,Progress in Or- ganic Coatings,47(3-4),448(2003)
4 J.I.Kleiman,Z.A.Iskanderova,F.J.Perez,R.C.Tennyson, Protective coatings for LEO environments in spacecraft applications,Surface and Coatings Technology,76-77, 827(1995)
5 B.A.Banks,S.K.Miller,K.K.de Groh,Low earth orbital atomic oxygen interactions with materials,AIAA 2004- 5638,13(2004)
6 R.L.Kiefer,R.A.Anderson,M.-H.Y.Kim,S.A.Thibeault, Modified polymeric materials for durability in the atomic oxygen space environment,Nuclear Instruments and Methods in Physics Research Section B:Beam Interac- tions with Materials and Atoms,208,300(2003)
7 Jin Jianyong,Chris M.Topping,S.Suresh,Stephen H.Foulger,Norman Rice,Bob H.Mojazza,Dennis W.Smith Jr,Synthesis and characterization of per- fluorocyclobutyl(PFCB)polymers containing pendent phenylphosphine oxide,Polymer,46(18),6923(2005)
8 G.B.Hoflund,R.I.Gonzalez,S.H.Phillips,In situ oxy- gen atom erosion study of a polyhedral oligomeric silsesquioxane-polyurethane copolymer,J.Adhesion Sci. Technol.,15(10),1199(2001)
9 M.E.Wright,B.J.Petteys,A.J.Guenthner,S.Fallis, G.R.Yandek,S.J.Tomczak,T.K.Minton,A.Brunsvold, Chemical modification of fluorinated polyimides:new thermally curing hybrid polymers with POSS,Macro- molecules,39(14),4710(2006)
10 J.V.Crivello,J.H.W.Lam,Diaryliodonium salt:A new class of photoinitiators for cationic polymerization,Macro- molecules,10(6),1307(1977)
11 Edward M.Silverman,Space environmental effects on spacecraft:LEO materials selection guide,N96-10860,4- 3(1995)
12 M.Ouyang,C.Yuan,R.J.Muisener,A.Boulares, J.K.Koberstein,Conversion of siloxane polymers to silicon oxide by UV/ozone photochemical processes, Chem.Mater.,12(6),1591(2000)
13 H.Hillborg,J.F.Ankner,U.W.Gedde,G.D.Smith, H.K.Yasuda,K.Wikstrom,Crosslinked polydimethyl- siloxane exposed to oxygen plasma studied by neutron reflectometry and other surface specific techniques, Polymer,41(18),6851(2000)
14 J.K.Mirley,J.T.Koberstein,A room temperature method for the preparation of ultrathin SiOx film Langmuir- Blodgett layers,Langmuir,11(4),1049(1995)
15 C.Waguer,W.Riggs,,L.Davis,J.Moulder,G.Mullenberg, Handbook of X-ray Photoelectron Spectroscop.(Perkin- Elmer Corp.,Physical Electronics Division,Eden Prairie, MN,1974)p.231
16 Daniel R.Coulter,Ranty H.Liang,Shirley Y.Chung,Keri Oda Smith,O-atom degrada,tion mechanisms of materials, N87-26178,39(1987)
17 DUO Shuwang,LI Meishuan,ZHANG Yaming,ZHOU Yanchun,Mass change and erosion mechanism of the poly- imide film during atomic oxygen exposure,Chinese Jour- nal of Materials Research,19(4),337(2005) (多树旺,李美栓,张亚明,周延春,原子氧环境中聚酰亚胺的质量变化和侵蚀机制,材料研究学报,19(4),337(2005))
[1] YE Jiaofeng, WANG Fei, ZUO Yang, ZHANG Junxiang, LUO Xiaoxiao, FENG Libang. Epoxy Resin-modified Thermo-reversible Polyurethane with High Strength, Toughness, and Self-healing Performance[J]. 材料研究学报, 2023, 37(4): 257-263.
[2] LI Hanlou, JIAO Xiaoguang, ZHU Huanhuan, ZHAO Xiaohuan, JIAO Qingze, FENG Caihong, ZHAO Yun. Synthesis of Branched Fluorine-containing Polyesters and their Properties[J]. 材料研究学报, 2023, 37(4): 315-320.
[3] MA Yizhou, ZHAO Qiuying, YANG Lu, QIU Jinhao. Preparation and Dielectric Energy Storage Properties of Thermoplastic Polyimide/Polyvinylidene Fluoride Composite Film[J]. 材料研究学报, 2023, 37(2): 89-94.
[4] SHEN Yanlong, LI Beigang. Preparation of Magnetic Amino Acid-Functionalized Aluminum Alginate Gel Polymer and its Super Adsorption on Azo Dyes[J]. 材料研究学报, 2022, 36(3): 220-230.
[5] LONG Qing, WANG Chuanyang. Thermal Degradation Behavior and Kinetics Analysis of PMMA with Different Carbon Black Contents[J]. 材料研究学报, 2022, 36(11): 837-844.
[6] ZENG Zhipeng, SONG Xiaoyan, SUN Yong, SONG Shuanglin, LU Wei, HE Zhenglong. Microstructure and Mechanical Property of Polyurethane/Water Glass Grouting Materials during Curing Process[J]. 材料研究学报, 2022, 36(11): 855-861.
[7] JIANG Ping, WU Lihua, LV Taiyong, Pérez-Rigueiro José, WANG Anping. Repetitive Stretching Tensile Behavior and Properties of Spider Major Ampullate Gland Silk[J]. 材料研究学报, 2022, 36(10): 747-759.
[8] YAN Jun, YANG Jin, WANG Tao, XU Guilong, LI Zhaohui. Preparation and Properties of Aqueous Phenolic Resin Modified by Organosilicone Oil[J]. 材料研究学报, 2021, 35(9): 651-656.
[9] XU Wen, WANG Zhijie, ZHU Wenwen, PENG Zitong, YAO Chu, YOU Feng, JIANG Xueliang. Preparation and Sound Absorption Properties of MPP-polymers Layered Structure Materials[J]. 材料研究学报, 2021, 35(7): 535-542.
[10] ZHANG Hao, LI Fan, CHANG Na, WANG Haitao, CHENG Bowen, WANG Panlei. Preparation of Carboxylic Acid Grafted Starch Adsorption Resin and Its Dye Removal Performance[J]. 材料研究学报, 2021, 35(6): 419-432.
[11] SUN Liying, QIAN Jianhua, ZHAO Yongfang. Preparation and Performance of AgNWs -TPU/PVDF Flexible Film Capacitance Sensors[J]. 材料研究学报, 2021, 35(6): 441-448.
[12] PAN Ying, ZHAO Hongting. Preparation of Halloysite Based Layer-by-Layer Coating on Flexible Polyurethane Foam and Its Performance of Flame Retardant and Smoke Suppression[J]. 材料研究学报, 2021, 35(6): 449-457.
[13] TANG Kaiyuan, HUANG Yang, HUANG Xiangzhou, GE Ying, LI Pinting, YUAN Fanshu, ZHANG Weiwei, SUN Dongping. Physicochemical Properties of Carbonized Bacterial Cellulose and Its Application in Methanol Electrocatalysis[J]. 材料研究学报, 2021, 35(4): 259-270.
[14] SU Chenwen, ZHANG Tingyue, GUO Liwei, LI Le, YANG Ping, LIU Yanqiu. Preparation of Thiol-ene Hydrogels for Extracellular Matrix Simulation[J]. 材料研究学报, 2021, 35(12): 903-910.
[15] ZHANG Xiangyang, ZHANG Qiyang, ZHENG Tao, TANG Tao, LIU Hao, LIU Guojin, ZHU Hailin, ZHU Haifeng. Fabrication of Composite Material Based on MOFs and its Adsorption Properties for Methylene Blue Dyes[J]. 材料研究学报, 2021, 35(11): 866-872.
No Suggested Reading articles found!