ODF ANALYSIS OF 3004 ALUMINIUM ALLOY CANMAKING SHEET IN THE MIDDLE PROCESSING STATE FROM CONTINUOUS CASTING AND HOT ROLLING

Chin J Mater Res

1996, Vol. 10

Issue (4): 378-382 DOI:

Current Issue | Archive | Adv Search

ODF ANALYSIS OF 3004 ALUMINIUM ALLOY CANMAKING SHEET IN THE MIDDLE PROCESSING STATE FROM CONTINUOUS CASTING AND HOT ROLLING

WEN Xiyu; WANG Yulin; ZHENG Yangzeng (Yanshan University)HE Chongzhi (Central Iron and Steel Resarch Insttute)(Correspondent:Department of Materials Engineering;Yanshan University;Qinhuangdao 066004)

Cite this article:

WEN Xiyu; WANG Yulin; ZHENG Yangzeng (Yanshan University)HE Chongzhi (Central Iron and Steel Resarch Insttute)(Correspondent:Department of Materials Engineering;Yanshan University;Qinhuangdao 066004). ODF ANALYSIS OF 3004 ALUMINIUM ALLOY CANMAKING SHEET IN THE MIDDLE PROCESSING STATE FROM CONTINUOUS CASTING AND HOT ROLLING. Chin J Mater Res, 1996, 10(4): 378-382.

Download:

PDF(398KB)
Export: BibTeX | EndNote (RIS)

Abstract The characteristics of texture in the 3004 Al canmaking sheet in the middle processing state from continuous casting and hot rolling were analysed by using ODF, and the produced textures in the two technologies were compared carefully. Experimental result

Key words: 3004 aluminium alloy continuous casting sheet hot rolling sheet texture

Received: 25 August 1996

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1996/V10/I4/378

1美国专利,No．4,517,034．1985．5．142林浩．轻金属,1989,(2):113王玉林,温熙字,郑炀曾．东北重型机械学院学报,1992,(4):3484ChiaEH,Carrollon．spoonerS．StarkeEA．Aluminium．1978,54(12):7575Edward,Willard,Hitechler,AlbertJosephKlein．IndustrialHeating,1981,(3);66HuctchinsonWB．轻合金加工技术,1991,19(8):217HuctchinsonWB．轻合金加工技术,1991,19(8):258温熙字,王玉林,郑炀曾．东北重型机械学院学报,1994、(2);175

[1]	XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696.
[2]	LIU Dongyang, TONG Guangzhe, GAO Wenli, WANG Weikai. Anisotropy of 2060 Al-Li Alloy Thick Plate[J]. 材料研究学报, 2023, 37(3): 235-240.
[3]	WANG Wei, ZHOU Shanqi, GONG Penghui, ZHANG Haoze, SHI Yaming, WANG Kuaishe. Effect of Anneal Treatment on Microstructure, Texture and Mechanical Properties of TC4 Alloy Plates[J]. 材料研究学报, 2023, 37(1): 70-80.
[4]	NING Bo, LI Zhichao, WU Huibin, ZHANG Bingjun, HUANG Manli, DING Chao. Mechanism of Improving Low Temperature Impact Toughness of 09MnNi Vessel Steel[J]. 材料研究学报, 2022, 36(9): 660-666.
[5]	YUAN Qiangqiang, WANG Zhigang, JIANG Yongfang, ZHANG Yinghui, HUANG Ankang, YE Jieyun. Effect of Warm-rolled Temperature on Microstructure and Texture in Cr-Ti-B Low Carbon Steel[J]. 材料研究学报, 2022, 36(2): 81-89.
[6]	GU Jiaqing, TANG Weineng, XU Shiwei. Microstructure Evolution During Tensile Deformation of an Extruded Mg-0.4Zn Alloy Plate[J]. 材料研究学报, 2021, 35(7): 553-560.
[7]	XI Guoqiang, QIU Jianke, LEI Jiafeng, MA Yingjie, YANG Rui. Room Temperature Creep Behavior of Ti-6Al-4V Alloy[J]. 材料研究学报, 2021, 35(12): 881-892.
[8]	FU Yongjun,LEI Jialiu,LIAO Qingling,ZHAO Dongnan,ZHANG Yucheng. Effect of Residual Carbon on Primary and Secondary Recrystallization of Grain-oriented Silicon Steel[J]. 材料研究学报, 2020, 34(2): 118-124.
[9]	Shuai DAI,Feng WANG,Zhi WANG,Zheng LIU,Pingli MAO. Effect of Cu Addition on Microstructure, Mechanical Property and Texture Evolution of Extrusion-shearing ZK60 Mg-alloy[J]. 材料研究学报, 2019, 33(12): 881-891.
[10]	WU Xiyue,CHEN Zhiyong,CHENG Chao,LIU Jianrong,XU Dongsheng,WANG Qingjiang. Effects of Heat Treatment on Microstructure, Texture and Tensile Properties of Ti65 Alloy[J]. 材料研究学报, 2019, 33(10): 785-793.
[11]	Wenyuan LI, Jianrong LIU, Zhiyong CHEN, Zibo ZHAO, Qingjiang WANG. Effect of Microstructure and Texture on Room Temperature Strength of Ti60 Ti-Alloy Plate[J]. 材料研究学报, 2018, 32(6): 455-463.
[12]	Shibo WEN, Wei YANG, Xiangju SHI, Yongfeng LIANG, Feng YE. Effect of Grain Orientation and Ordered Phase on Ductility of Fe-6.5%Si Alloy Wires[J]. 材料研究学报, 2018, 32(4): 315-320.
[13]	Mingming MA, Feng LIAN, Kang JIANG, Huichen ZHANG. Wettability and Tribological Performance of Texture Surface in Oil and Water[J]. 材料研究学报, 2018, 32(3): 191-199.
[14]	Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202.
[15]	Futao DONG, Fei XUE, Linxiu DU, Xianghua LIU. Influence of Carbon Content on Properties of an Ultra-Low Carbon Ti-Bearing Steel for Enameling[J]. 材料研究学报, 2017, 31(12): 887-893.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed