THE RAPID SOLIDIFICATION AND MICROSTRUCTURE OF Al-Si-Ti-Ce ALLOYS

Chin J Mater Res

1992, Vol. 6

Issue (5): 395-399 DOI:

Current Issue | Archive | Adv Search

THE RAPID SOLIDIFICATION AND MICROSTRUCTURE OF Al-Si-Ti-Ce ALLOYS

SHAO Guosheng;SHEN Ningfu(Zhengzhou Institute of Technology)

Cite this article:

SHAO Guosheng;SHEN Ningfu(Zhengzhou Institute of Technology). THE RAPID SOLIDIFICATION AND MICROSTRUCTURE OF Al-Si-Ti-Ce ALLOYS. Chin J Mater Res, 1992, 6(5): 395-399.

Download:

PDF(1632KB)
Export: BibTeX | EndNote (RIS)

Abstract The rapid solidification and microstructure characteristics of the melt-spunAl-Si-(Ti-Ce)alloy ribbons of 50μm in thickness have been investigated.The results show thatthe addition of Ti into Al-Si alloys will decrease the undercoolability of the alloy ri

Key words: rapid solidification aluminum alloy intermetallic compound.

Received: 25 October 1992

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1992/V6/I5/395

1 Mondolfo L F.Aluminum:Structure and Properties.London-Boston,Butterworths,1976
2 Itagaki M.Tran ASM,1968;61:330
3 Shingu P H.JIM,1973;37:433
4 Levi C G,Mehrabian R.Metall Trans,1984;13A:13
5 Levi C G.Metall Trans,1988;19A:687
6 Isamu Yamauchi.Trans JIM,1986;27:189

[1]	LIAO Hongyu, JIA Yongxin, SU Ruiming, LI Guanglong, QU Yingdong, LI Rongde. Effect of Retrogression Times on Microstructure and Corrosion Resistance of 2024 Aluminum Alloy[J]. 材料研究学报, 2023, 37(4): 264-270.
[2]	NIE Jingjing, GONG Zhengxuan, SUN Jingli, YANG Sida, XIA Xianchao, XU Aijie. Microstructure and Properties of Butt Welding Joints of 2195-2219 Al-alloy Plates[J]. 材料研究学报, 2023, 37(2): 152-160.
[3]	YU Cong, CHEN Leping, JIANG Hongxiang, ZHOU Quan, YANG Chenggang. Effect of Deep Cryogenic-Aging Treatment on Microstructure and Mechanical Properties of 7075 Al-alloy[J]. 材料研究学报, 2023, 37(2): 120-128.
[4]	YANG Bing, LIU Chunzhong, GAO Enzhi, SUN Wei, LIU Ting, ZHANG Hongning, ZHU Mingwei, LU Tianni. Deformation Behavior of Cast and Annealed 2024 Al-alloy at Different Temperatures[J]. 材料研究学报, 2022, 36(10): 730-738.
[5]	LIAO Zexin, LI Chengbo, LIU Shengdan, TANG Jianguo, HUANG Chuanyan, ZHU Xianyan. Effect of Post Aging on Mechanical Properties of Friction Stir Welded 7046 Aluminum Alloy[J]. 材料研究学报, 2021, 35(7): 543-552.
[6]	DU Bangdeng, LIU Jun, WANG Xiaowan, WANG Wei, CHEN Demin. Effect of Heat Treatment on Microstructure and Al-water Reactivity of Al-Mg-Ga-In-Sn Alloys[J]. 材料研究学报, 2021, 35(1): 25-35.
[7]	WANG Jing, XU Guofu, LI Yao, LI Fangfang, HUANG Jiwu, PENG Xiaoyan. Effect of Quench Rate on Mechanical Properties and Microstructure of 6082 Al-alloy[J]. 材料研究学报, 2020, 34(5): 337-344.
[8]	JIANG Jufu, WANG Ying, XIAO Guanfei, DENG Teng, LIU Yingze, ZHANG Ying. Influence of Modification, Refinement and Heat Treatment on Mechanical Properties of A356 Al-alloy Components Prepared by Squeeze Casting[J]. 材料研究学报, 2020, 34(12): 881-891.
[9]	SONG Wenshuo, SONG Zhuman, LUO Xuemei, ZHANG Guangping, ZHANG Bin. Effect of Temperature on Tensile Properties of 6101 Al-alloy Wires[J]. 材料研究学报, 2020, 34(10): 730-736.
[10]	CHEN Xianming, PAN Qinglin, FAN Yingying. Precipitation of Al₃(Sc_x,Ti_1-_x) Particles in Al-Mg-Sc-Ti Alloy[J]. 材料研究学报, 2020, 34(10): 737-743.
[11]	CAO Leigang,ZHU Lin,ZHANG Leilei,WANG Hui,CUI Yan,YANG Yue,LIU Fengbin. Microstructure Evolution and Mechanical Properties of Rapid Solidified AlCoCrFeNi_2.1 Eutectic High Entropy Alloy[J]. 材料研究学报, 2019, 33(9): 650-658.
[12]	Chengbo LI,Yunlai DENG,Jianguo TANG,Jianxiang LI,Xinming ZHANG. Effect of Quenching Rate on Properties of Automotive High Strength Al-alloy[J]. 材料研究学报, 2019, 33(2): 103-108.
[13]	Tuo YE,Yuanzhi WU,Anmin LIU,Xu TANG,Luoxing LI. Deformation Behavior and Micro-mechanism of As-extruded 6013-T4 Al Alloy under Dynamic Impact Loading[J]. 材料研究学报, 2019, 33(2): 109-116.
[14]	Jian WANG, Wenjing YANG, Zhuoliang LI, Hua DING, Ning ZHANG, Hongliang HOU. Superplastic Behavior and Deformation Mechanism of 7B04 Al-alloy[J]. 材料研究学报, 2018, 32(9): 675-684.
[15]	Shengdan LIU, Chen GUO, Lingying YE, Zhenshen YANG, Yunlai DENG. Influence of Quench Rate on Exfoliation Corrosion Resistance of Rolled 7020 Al-alloy Plate[J]. 材料研究学报, 2018, 32(6): 423-431.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed