Chin J Mater Res  1990, Vol. 4 Issue (4): 291-296    DOI:

Current Issue | Archive | Adv Search |

DEFORMATION TEXTURES AND THEIR FORMATION MODEL OF 70/30 BRASS ROLLED IN SINGLE DIRECTION

ZHAO Xiang;LIU Yansheng;XU Jiazhen;LIANG Zhide(Northeast University of Technology)

ZHAO Xiang;LIU Yansheng;XU Jiazhen;LIANG Zhide(Northeast University of Technology). DEFORMATION TEXTURES AND THEIR FORMATION MODEL OF 70/30 BRASS ROLLED IN SINGLE DIRECTION. Chin J Mater Res, 1990, 4(4): 291-296.

Abstract References Related Articles Recommended Metrics Download:  PDF(449KB)  Export:  BibTeX | EndNote (RIS)       Abstract  70/30 brass is rolled in single direction with different rolling reductions.Three dimentional orientation distribution function is utilized to analysis the macroscopicstatistic unsymmetric textures.According to the state of received shear force,a formatio Key words:  texture      three dimentional orientation distribution function(ODF)      macroscopic statistic unsymmetry      pole figure      Received:  25 August 1990      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1990/V4/I4/291 1 Hu H et al.Trans AIME 1952;(194) :76 2 Duggan B J et al.Met.Sci.1978;(12) :34 3 Wassermann G,Z.Metallkde,1963;54:61 4 Lücke K.Proc 6th Inst Conf,Tokyo,The Iron and Steel Institute of Japan,1981;(1) :14 5 Hu H et al.Textures and Microstructures,1988;(8&9) :191 6 Brickenkamp W et al.Proc 6th Inst Conf,Tokyo,The Iron and Steel Institute of Japan,1981;(1) :570 7 梁志德,徐家桢,王福.织构材料的三维取向分析术-ODF分析.沈阳:东北工学院出版社,1986:108 8 Hatherly M.Proc 5th Int Conf on Textures of Materials,Springer-Verlay,Berlin/Heidelberg/New York,1978:81X [1] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696. [2] LIU Dongyang, TONG Guangzhe, GAO Wenli, WANG Weikai. Anisotropy of 2060 Al-Li Alloy Thick Plate[J]. 材料研究学报, 2023, 37(3): 235-240. [3] WANG Wei, ZHOU Shanqi, GONG Penghui, ZHANG Haoze, SHI Yaming, WANG Kuaishe. Effect of Anneal Treatment on Microstructure, Texture and Mechanical Properties of TC4 Alloy Plates[J]. 材料研究学报, 2023, 37(1): 70-80. [4] NING Bo, LI Zhichao, WU Huibin, ZHANG Bingjun, HUANG Manli, DING Chao. Mechanism of Improving Low Temperature Impact Toughness of 09MnNi Vessel Steel[J]. 材料研究学报, 2022, 36(9): 660-666. [5] YUAN Qiangqiang, WANG Zhigang, JIANG Yongfang, ZHANG Yinghui, HUANG Ankang, YE Jieyun. Effect of Warm-rolled Temperature on Microstructure and Texture in Cr-Ti-B Low Carbon Steel[J]. 材料研究学报, 2022, 36(2): 81-89. [6] GU Jiaqing, TANG Weineng, XU Shiwei. Microstructure Evolution During Tensile Deformation of an Extruded Mg-0.4Zn Alloy Plate[J]. 材料研究学报, 2021, 35(7): 553-560. [7] XI Guoqiang, QIU Jianke, LEI Jiafeng, MA Yingjie, YANG Rui. Room Temperature Creep Behavior of Ti-6Al-4V Alloy[J]. 材料研究学报, 2021, 35(12): 881-892. [8] FU Yongjun,LEI Jialiu,LIAO Qingling,ZHAO Dongnan,ZHANG Yucheng. Effect of Residual Carbon on Primary and Secondary Recrystallization of Grain-oriented Silicon Steel[J]. 材料研究学报, 2020, 34(2): 118-124. [9] Shuai DAI,Feng WANG,Zhi WANG,Zheng LIU,Pingli MAO. Effect of Cu Addition on Microstructure, Mechanical Property and Texture Evolution of Extrusion-shearing ZK60 Mg-alloy[J]. 材料研究学报, 2019, 33(12): 881-891. [10] WU Xiyue,CHEN Zhiyong,CHENG Chao,LIU Jianrong,XU Dongsheng,WANG Qingjiang. Effects of Heat Treatment on Microstructure, Texture and Tensile Properties of Ti65 Alloy[J]. 材料研究学报, 2019, 33(10): 785-793. [11] Wenyuan LI, Jianrong LIU, Zhiyong CHEN, Zibo ZHAO, Qingjiang WANG. Effect of Microstructure and Texture on Room Temperature Strength of Ti60 Ti-Alloy Plate[J]. 材料研究学报, 2018, 32(6): 455-463. [12] Shibo WEN, Wei YANG, Xiangju SHI, Yongfeng LIANG, Feng YE. Effect of Grain Orientation and Ordered Phase on Ductility of Fe-6.5%Si Alloy Wires[J]. 材料研究学报, 2018, 32(4): 315-320. [13] Mingming MA, Feng LIAN, Kang JIANG, Huichen ZHANG. Wettability and Tribological Performance of Texture Surface in Oil and Water[J]. 材料研究学报, 2018, 32(3): 191-199. [14] Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202. [15] Futao DONG, Fei XUE, Linxiu DU, Xianghua LIU. Influence of Carbon Content on Properties of an Ultra-Low Carbon Ti-Bearing Steel for Enameling[J]. 材料研究学报, 2017, 31(12): 887-893. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed