Chin J Mater Res  1989, Vol. 3 Issue (6): 536-540    DOI:

Current Issue | Archive | Adv Search |

THE APPLICATIN OF MSSBAUER EFFECT IN MEASUREMENT OF RETAINED AUSTENITE IN HIGH SPEED STEEL

ZHANG Henghua SU Shizhang MA Ruzhang (University of science and technology Beijing)CHANG Ruqin JIN Huijuan XU Guiqin (Shanghai Iron and steel Research Institute)

ZHANG Henghua SU Shizhang MA Ruzhang (University of science and technology Beijing)CHANG Ruqin JIN Huijuan XU Guiqin (Shanghai Iron and steel Research Institute). THE APPLICATIN OF MSSBAUER EFFECT IN MEASUREMENT OF RETAINED AUSTENITE IN HIGH SPEED STEEL. Chin J Mater Res, 1989, 3(6): 536-540.

Abstract References Related Articles Recommended Metrics Download:  PDF(363KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The transmission M(?)ssbauer effect was first applied to mea-sure the content of austenite in a series of standard specimen,The measured results were accordant with the known content approximately.The concentrationof retained austenite in a series of M2 h Key words:  M(?)ssbauer effect      high speed steel      retained austenite      Received:  25 December 1989      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1989/V3/I6/536 1 Abe N,Schwartz L H.Mater Sci Eng,1974;14:239 2 Schwartz L H.In:Cohen R L ed.Applications of M(o|¨)ssbauer Spectrcscopy,New York:Academic Press,1976:62 3 Choi H J,Schwartz L H.Metall Trans,1983;14:1089 4 Ladriere L H,He X J.Mater Sci Eng,1986;77:133 5 Chow H K,Bogner R L.Develop Appli Spectrosc,1970;8:229 6 Tenata Azevedo A L.Scripta Metall,1978;12:113 7 Ikhlef A et al.Mém Etud Sci Rev Metall,1983;80:377 [1] LIU Jihao, CHI Hongxiao, WU Huibin, MA Dangshen, ZHOU Jian, XU Huixia. Heat Treatment Related Microstructure Evolution and Low Hardness Issue of Spray Forming M3 High Speed Steel[J]. 材料研究学报, 2023, 37(8): 625-632. [2] ZHOU Yonglang, WANG Guantao, WANG Lijun, LIU Chunming. Effect of Heat Treatment Process on Microstructure and Properties of a 0.1%C-3% Mn Medium Manganese Steel of High-formability[J]. 材料研究学报, 2022, 36(5): 343-352. [3] HU Haibo, ZHU Lihui, DUAN Yuanman, WU Xiaochun, GU Bingfu. In-situ Study of Microcrack Initiation and Propagation of M2 High Speed Steel[J]. 材料研究学报, 2022, 36(5): 365-372. [4] DUAN Yuanman, ZHU Lihui, WU Xiaochun, GU Bingfu. Effect of Deep Cryogenic Treatment Time on Red Hardness of M2 High Speed Steel[J]. 材料研究学报, 2021, 35(1): 17-24. [5] ZHANG Xiangyun, LI Jiguang, YAN Ling, HE Xuze, GUO Jing. Effect of Tempering Temperature on Microstructure and Properties of Intercritical Annealing Marine Steel[J]. 材料研究学报, 2020, 34(11): 845-852. [6] WANG Bin,HE Yanping,WANG Haojie,TIAN Yong,JIA Tao,WANG Bingxing,WANG Zhaodong. Vacuum Low-pressure Carburization of Gear Steel 16Cr3NiWMoVNbE for Aviation[J]. 材料研究学报, 2020, 34(1): 35-42. [7] Donghui LI, Zhimin LI, Maoguo XIAO, Shaohong LI, Kunyu ZHAO, Maosheng YANG. Effect of Deep Cryogenic Treatment on Mechanical Property and Microstructure of a Low Carbon High Alloy Martensitic Bearing Steel during Tempering[J]. 材料研究学报, 2019, 33(8): 561-571. [8] Zhiping HU, Yunbo XU, Hui LIU, Le WANG. Microstructure Evolution and Mechanical Properties of Cold-rolled Mn-Al TRIP Steel with δ Ferrite[J]. 材料研究学报, 2018, 32(3): 177-183. [9] Lin LU,Longgang HOU,Hebin WANG,Jinxiang ZHANG,Hua CUI,Jinfeng HUANG,Yongan ZHANG,Jishan ZHANG. Hot Deformation of Spray-Formed Nb-Containing High Speed Steel—A Study Using Processing Map[J]. 材料研究学报, 2015, 29(7): 496-504. [10] Yongqiang REN,Chengjia SHANG,Hongwei ZHANG,Shengfu YUAN,Erhu CHEN. Effect of Retained Austenite on Toughness and Plasticity of 0.23C-1.9Mn-1.6Si Steel[J]. 材料研究学报, 2014, 28(4): 274-280. [11] WANG Hebin, ZHANG Jinxiang, LU Lin, HOU Longgang, CUI Hua, HUANG Jinfeng, ZHANG Jishan. High-temperature Thermal Deformation and Microstructure Evolution of Spray Formed M4 High Speed Steel[J]. 材料研究学报, 2013, 27(2): 167-172. [12] XU Yunbo HOU Xiaoying WANG Yeqin WU Di. Mechanical Properties of High-strength V-microalloyed TRIP-aided Sheet Steel with Bainitic Ferrite Matrix[J]. 材料研究学报, 2012, 26(2): 175-180. [13] WANG Cunyu SHI Jie LIU Su DU Shaofeng DONG Han. Study on three--body impact--abrasion of steel treated by quenching--partitioning--tempering process[J]. 材料研究学报, 2009, 23(3): 305-310. [14] LI Yanjun (Harbin Institute of Technology)JIANG Qichuan; HE Zhenming;ZHAO Yuguang(Jilin University of Technology)GE Liaohai (Changchun Institute of Applied Chemistry;ChineseAcademy of Science). INFLUENCE OF Al ON THE SOLIDIFICATION PROCEDURE OF M2 HIGH SPEED STEEL[J]. 材料研究学报, 1997, 11(2): 216-218. [15] PAN Fushen;DING Peidao;ZHOU Shouze(Chongqing University). (M,Si)_6C CARBIDE IN HIGH SPEED STEELS[J]. 材料研究学报, 1990, 4(6): 498-503. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed