Please wait a minute...
材料研究学报  2001, Vol. 15 Issue (6): 693-698    
  论文 本期目录 | 过刊浏览 |
Al2O3基多角柱状陶瓷复合材料的延缓型断裂
闵光辉;李茹;井上贵博;上野和夫
山东大学;大阪工业技术研究所能源变换材料部
引用本文:

闵光辉; 李茹; 井上贵博; 上野和夫 . Al2O3基多角柱状陶瓷复合材料的延缓型断裂[J]. 材料研究学报, 2001, 15(6): 693-698.

全文: PDF(1078 KB)  
摘要: 研究了以SiC为界面层的Al2O3基多角柱状陶瓷复合材料的断裂韧性以及断裂功,发现该材料的断裂能显著提高. 通过观察裂纹扩展路径以及断裂形貌,分析了多角柱状复合材料的断裂行为. 在弯曲强度和韧性测试中,这一材料在适当的载荷容量下, 展示出延缓型的断裂行为和非脆性的失效方式.
关键词 Al2O3基多角柱状陶瓷复合材料韧性断裂    
Key words
收稿日期: 1900-01-01     
1 J.Cook, J.E.Gordon, A mechanism for the control of crack propagation in all-brittle system, Proc.R.Soc.,London, 1964: 282
2 W.S.Coblenz, Fibrous monolithic ceramic and method for production, US Pat. No.4 772 524, 1988
3 S.Baskaran, S.D.Dunn, J.W.Holloran, Fibrous monolithic ceramics: fabrication, microstructure and inden-tation beharior, J.Am.Ceram.Soc., 76, 2209(1993)
4 S.Baskaran, J.W.Holloran, Fibrous monolithic ceramics: mechanical properties and oxidation behavior ofthe silicon carbide/boron nitride system, J.Am.Ceram.Soc., 77, 1249(1994)
5 S.Y.Lienard, J.W.Halloran, Texture development of silicon nitride/ boron nitride fibrous monolithic ceramics,J.Mater.Sci., 35, 3365(2000)
6 K.Ueno, Fabricating method for a prismatic ceramic composites, JP Pat. No.9-318910
7 K.Ueno, Prismatic structures ceramic, J.Soc.Mat.Sci. Japan, 47(6), 644(1998)
8 G.Min, T.Inoue, fabrication and fracture behavior of alumina-based prismatic ceramic composites, TechnicalReport, Japan International Cooperation Agency 9, 1(1999)
9 T.Inoue, K.Ueno, Mechanical properties and fracture behavior of SiTiCO fibre/SiAlON composites, CeramicsInternational, 24, 565(1998)
10 W.J.Clegg, K.Kendall, N.M.Alford, A simple way to make tough ceramic, Nature(London), 357, 455(1990)
11 S.Cai, Y.Huang, Influence of interface characteristic on the mechanical properties of multiplayer Si3N4ceramics, Acta Compositie Sinica, 16, 110(1999)
12 J.She, Fabrication and characterization of multilayer alumina-based composites with improved fracturebehavior, materials Letters, 42, 155(2000)
13 JShe, T.Inoue, Mechanical properties and fracture behavior of Al2O3/SiC fibrous ceramics,J.Euro.Ceram.Soc., 20, 1887(2000)
14 S.Y.Park, B.Saruhan, Mullite/zirconia laminate composites for high temperature application,J.Euro.Ceram.Soc., 20, 2463(2000)
15 Kova, B.H.King, J.W.Holloran, Fibrous monolithic ceramics, J.Am.Ceram.Soc., 80, 2471(1997)
16 J.She, fracture behavior and mechanical properties of multilayered alumina-based composites with differentlayer thicknesses, Materials Science Letters, 19, 45(2000)
17 J.She, Multilayer Al2O3/SiC ceramics with improved mechanical behavior, J.Euro.Ceram.Soc., 20,1771(2000)
[1] 刘瑞峰, 仙运昌, 赵瑞, 周印梅, 王文先. 钛合金/不锈钢复合板的放电等离子烧结技术制备及其性能[J]. 材料研究学报, 2023, 37(8): 581-589.
[2] 夏博, 王斌, 张鹏, 李小武, 张哲峰. 回火温度对高强弹簧钢微观组织和冲击性能的影响[J]. 材料研究学报, 2023, 37(5): 341-352.
[3] 刘明, 伍家楠. 圆锥压头递增载荷对材料的划痕行为[J]. 材料研究学报, 2022, 36(3): 191-205.
[4] 高野, 任家宽, 李志峰, 崔聪, 陈俊, 刘振宇. 奥氏体化温度对900 MPaHSLA钢显微组织和晶体学演变的影响[J]. 材料研究学报, 2022, 36(1): 21-28.
[5] 朱高文, 吴栋, 陆善平. CW对低合金Cr-Mo钢焊缝金属组织和冲击韧性的影响[J]. 材料研究学报, 2021, 35(7): 481-492.
[6] 谌理飞, 罗云蓉, 张应迁, 李辉, 李秀兰, 廖文丽. 盐雾预腐蚀对HRB400E抗震钢筋超低周疲劳性能的影响[J]. 材料研究学报, 2021, 35(2): 101-109.
[7] 陈刚, 罗小兵, 柴锋, 杨才福, 张正延, 杨志刚. 两次淬火对HSLA钢组织和冲击韧性的影响[J]. 材料研究学报, 2020, 34(9): 705-711.
[8] 卢秋虹, 王宁, 范诚, 申勇峰, 刘明涛, 汤铁钢, 胡海波. 壁厚对HR2钢柱壳爆轰加载下膨胀断裂行为的影响[J]. 材料研究学报, 2020, 34(4): 241-246.
[9] 张翔云, 李激光, 严玲, 何煦泽, 郭菁. 回火温度对两相区退火海工钢组织和性能的影响[J]. 材料研究学报, 2020, 34(11): 845-852.
[10] 朱永飞,李沛林,苏俊铭,于淑娟. 聚酰胺650对苯并噁嗪开环聚合和固化物性能的影响[J]. 材料研究学报, 2019, 33(11): 857-864.
[11] 武岳,李建平,杨忠,郭永春,马志军,梁民宪,杨通,陶栋. 含有Cu、Mo、Sn的高强度蠕墨铸铁的蠕变行为[J]. 材料研究学报, 2019, 33(1): 43-52.
[12] 段启强, 王斌, 张鹏, 屈瑞涛, 张哲峰. 高强钢断裂韧性KIC的小尺寸试样评价方法[J]. 材料研究学报, 2018, 32(8): 561-566.
[13] 王少杰, 韩靖, 曾伟, 张雪梅, 赵君文, 戴光泽. 低温对ER8车轮钢力学性能的影响[J]. 材料研究学报, 2018, 32(6): 401-408.
[14] 张进, 柴孟瑜, 项靖海, 段权, 李丽婵. 316LN不锈钢断裂过程的声发射特性[J]. 材料研究学报, 2018, 32(6): 415-422.
[15] 李旭敏, 方峰, 涂益友, 周雪峰, 吴建忠, 徐辉霞. Mo含量对D2钢组织与性能的影响[J]. 材料研究学报, 2018, 32(6): 432-431.