|
|
|
| AlSi7MgBe合金的半固态挤压成形 |
| 赵大志1; 路贵民2; 崔建忠1 |
1.东北大学 材料电磁过程研究教育部重点实验室 沈阳110004
2.华东理工大学资源与环境工程学院 上海 200237 |
|
| Semi–solid thixo-extrusion of AlSi7MgBe alloy |
| ZHAO Dazhi1; LU Guimin2; CUI Jianzhong1 |
1.Key Lab of Electromagnetic Processing of Materials; Ministry of Education; Northeastern University; Shenyang 110004
2.School of Resources and Environmental Engineering; East China University of Science and Technology; Shanghai 200237 |
引用本文:
赵大志 路贵民 崔建忠. AlSi7MgBe合金的半固态挤压成形[J]. 材料研究学报, 2009, 23(2): 127-132.
,
,
.
Semi–solid thixo-extrusion of AlSi7MgBe alloy[J]. Chin J Mater Res, 2009, 23(2): 127-132.
| 1 M.C.Fleming, R.A.Martinez, in Proceedings of the 9th Inter. Conf. on Semi–Solid Processing of Alloys and Composites, Principles of microstructural formation in semi–solid metal processing, edited by C.G.Kang, S.K.Kim, S.Y.Lee (Korea, Busan, Trans Tech Publications Ltd, 2006) p.1
2 M.Suery, C.L.Martin, L.Salvo, in Proceedings of the 4th Inter. Conf. on Semi–Solid Processing of Alloys and Composites, Overview of the Rheological Behaviour of Globular and Dendritic Slurries, edited by D.H.Kirkwood, P.Kapranos, (Sheffield, the University of Sheffield, 1996)p.21
3 J.A.Yurko, R.A.Martinez, M.C.Flemings, in Proceedings of the 7th Inter. Conf. on Semi–Solid Processing of Alloys and Composites, Development of the Semi–Solid Rheocasting(SSR) Processing, edited by Y.Tsutsui, M.Kiuchi, K.Ichikawa (Japan, Tsukuba, National Institute of Advanced Industrial Science & Technology and Japan Society for Technology of Plasticity, 2002) p.659
4 LU Guimin, DONG Jie, CUI Jianzhong, WANG Ping, Study on the reheating and thixoforming of 7075 aluminum alloy cast by liquidus semi–continuous casting, Acta Metallrugica Sinica, 37(11), 1184(2001)
(路贵民, 董杰, 崔建忠, 王平, 液相线半连续铸造7075Al合金二次加热与触变成形, 金属学报, 37(11), 1184(2001))
5 D.G.Altenpohl, Thixotropic alumimum summary and future prospects, Aluminum, (10), 694(1996)
6 M.S.Lewandowski, R.A.Overfelt, High temperature deformation behavior of solid and semi–solid alloy 718, Acta Mater, 47(18), 4695(1999)
7 C.G.Kang, J.S.Choi, K.H.Kim, The effect of strain rate on macroscopic behavior in the compression forming of semi–solid aluminum alloy, Materials Processing Technology, 88, 159(1999)
8 H.V.Atkinson, D.Liu, in Proceedings of the 7th Inter. Conf. on Semi–Solid Processing of Alloys and Composites, Development of high performance aluminiu alloys for thixocasting, edited by Y.Tsutsui, M.Kiuchi, K.Ichikawa (Japan, Tsukuba, National Institute of Advanced Industrial Science & Technology and Japan Society for Technology of Plasticity, 2002) p.51
9 J Dong, J.Z.Cui, Q.C.Le, G.M.Lu, Liquidus semi–continuous casting, reheating and thixoforming of a wrought aluminum alloy 7075, Materials Science & Engineering A, A345, 234(2003)
10 DONG Jie, LU Guimin, REN Qifeng, CUI Jianzhong, Discussion on the formation mechanism of nondendritic semisolid microstructures during liquidus casting, Acta Metallrugica Sinica, 38(2), 203(2002)
(董杰, 路贵民, 任栖锋, 崔建忠, 液相线铸造法非枝晶半固态组织形成机理探讨, 金属学报, 38(2), 203(2002))
11 LIU Dan, CUI Jianzhong, XIA Kenong, Microstructure of liqudus casting aluninum alloy 2618, Journal of Northeaster University(Natural Science), 20(2), 173(1999)
(刘丹, 崔建忠, 夏克农, 液相线铸造铝合金2618 显微组织, 东北大学学报(自然科学版), 20(2), 173(1999))
12 WU Xianghong, ZHAO Guoqun, SUN Sheng, LOU Shumei, MA Xinwu, The influence of extrusion speed and frictional status on aluminum profile extrusion processes, Journal of Plasticity Engineering, 14(1), 36(2007)
(吴向红, 赵国群, 孙胜, 娄淑梅, 马新武, 挤压速度和摩擦状态对铝型材挤压过程的影响, 塑性工程学报, 14(1), 36(2007))
13 M.Ferrante, E.de.Freitas, Rheology and microstructural development of a Al–4wt%Cu alloy in the semi–solid state, Materials Science and Engineering A, 271, 172(1999)
14 E.Tzimas, A.Zavaliangos, Mechanical behavior of alloys with equiaxed microstructure in the semisolid state at high solid content, Acta Mater., 47(2), 517(1999)
15 J.H.Yoon, Y.T.Im, N.S.Kim, Rigid-thermoviscoplastic finite–element analysis of the semi–solid forging of Al2024, Journal of Materials Processing Technology, 89, 104(1999)
16 H.Iwasakil, T.Moril, M.Mabuchi, K.Higashi, Shear deformation behavior of Al–5%Mg in a semi–solid state, Acta Mater., 46(18), 6351(1998)
17 W.Lapkowski, J.Shicczak, S.Rusz, Feasibility of metal forming in semi–liquid state, Materials Processing Technology, 63, 260(1997)
18 M.M.Rovira, B.C.Lancini, M.H.Robert, Thixo–forming of Al–Cu alloys, Materials Processing Technology, 92, 42(1999)
19 D.Y.Yang, K.J.Kim, Design of processes and products through simulation of three–dimensional extrusion, Journal of Materials Processing Technology, 191, 2(2007)
20 J.S.Ajiboye, M.B.Adeyemi, Effects of extrusion variables on temperature distribution in axisymmetric extrusion process, International Journal of Mechanical Sciences, 50(3), 522(2008)
21 T.Altinbalik, O.Ayer, A theoretical and experimental study for forward extrusion of clover sections, Materials and Design, 29(6), 1182(2008)
22 Hanlin Ding, Liufa Liu, Shigeharu Kamado, Wenjiang Ding, Yo Kojima, Study of the microstructure, texture and tensile properties of as–extruded AZ91 magnesium alloy, Journal of Alloys and Compounds, 29(5), 400(2008) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
