Please wait a minute...
Chin J Mater Res  2009, Vol. 23 Issue (6): 582-586    DOI:
论文 Current Issue | Archive | Adv Search |
High temperature oxidation kinetics of SiC particles
LI Yuhai1; HUANG Xiaoying1;  WANG Chengzhi1;  LI Ying2
1.School of Materials Science and Engineering; Shenyang Ligong University; Shengyang 110168
2.Shenyang Institute of Science and Technology Instrument; Shenyang 110043
Cite this article: 

LI Yuhai HUANG Xiaoying WANG Chengzhi LI Ying. High temperature oxidation kinetics of SiC particles. Chin J Mater Res, 2009, 23(6): 582-586.

Download:  PDF(719KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

The oxidation kinetics of SiC particle in air at the temperature 927oC, 1027oC, 1127oC was investigated by continuous weighing method in high temperature oxidation furnace. The results show that the oxidation rate constant increases with the rising temperature. Oxidation process of SiC particle can be divided into the earlier and the later period. Oxidation rate was controlled by surface chemical reaction in the earlier period and by diffusion in later period. Apparent activation energy in the later period is much bigger than that in the earlier period. The oxidation process conforms to two-stage model. In the earlier period kc=143.37exp((−70994)/(RT) ) (mg·m−2·min−1), In the later period kD=3.61×108exp(−192758 RT )(mg·m−2·min−1)

Key words:  foundational discipline in materials science       SiC particle       high temperature oxidation kinetics       oxidation rate     
Received:  31 March 2009     
ZTFLH: 

TB321

 

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2009/V23/I6/582

1 WANG Xiaohong, FENG Peizhong, QIANG Yinghuai, Researeh and Development of Fabrieation & Applications for Sicp Particle-reinforced Aluminum Matrix Composites, Light Alloy Fabrication Technology, 30(12), 9(2002) (王晓虹, 冯培忠, 强颖怀, SiCp增强铝基复合材料的制备与应用的研究进展, 轻合金加工技术,   30(12), 9(2002)) 2 ZGOU Zhengjun, LIU Junwu, Preparation of SiCp-Ni Compound Particle by Electroless Particle Surface Technology, 31(05), 19(2002) (邹正军, 刘君武, 化学镀法制备SiCp-Ni复合粉体, 表面技术,  31(05), 19-21(2002)) 3 WANG Hailong, Study on the SiC(Cu)/Al Ceramicmetal Composites, Masters Thesis, Zgebgzhou University(2004) (王海龙, SiC(Cu) /Al金属陶瓷复合材料的研究, 硕士学位论文, 郑州大学(2004)) 4 LIU Junyou, LIU Yingcai, LIU Guocai, Oxidation behavior of silicon carbide particales and their interfacial characterization in aluminum matrix composites, The Chinese Journal of Nonferrous Metals, 12(05), 961(2002) (刘俊友, 刘英才, 刘国权, SiC颗粒氧化行为及SiCp/铝基复合材料界面特征, 中国有色金属学报,  12(05), 961(2002)) 5 K.Mergia, D.Lafatzis, N.Moutis, Oxidation behaviour of SiC coatings, Applied Physics, 92, 387(2008) 6 Laurie A. Pierce, Diane M. Mieskowski, William A. Sanders, Effect of grain-boundary crystallization on the high-temperature strength of silicon nitride, Materials science, 21, 1348(1986) 7 GAO Ying, Oxidation Behavior of Sialon/Si3N4–SiC in Middle-high Temperature, Master's Thesis,  XI'An University Of Architecture and Technology(2007) (高瑛, Sialon/Si3N4--SiC系材料中高温氧化行为的研究, 硕士学位论文, 西安建筑科技大学(2007)) 8 D.Sciti, F.Winterhalter, A.Bellosi, Oxidation behaviour of a pressureless sintered AIN-SiC composite, Materials science, 39, 6965(2004) 9 MO Dingcheng, Metallurgical Kinetics (Changsha, The Press of Central South University of Technology, 1987) p.173 (莫鼎成,  冶金动力学  (长沙, 中南工业大学出版社, 1987) p.173) 10 W.M.N.Nour, S.H.Kenawy, Oxidation behaviour of SiCplatelets and particulates-reinforced Al2O3/ZrO2 matrix composites, Materials science, 38, 1673(2003) 11 Gerhard H. Schiroky, In situ measurement of silicon oxidation kinetics by monitoring spectrally emitted radiation, Materials science, 22, 3595(1987) 12 Y.J.vander Meulen, J.G.Cahill, Effeces of HCl and Cl2 additions on silicon oxidation kinetics, Electronic Materials, 3, 372(1974) 13 ZHANG Wei, University Chemistry, 1, (Beijing, Chemical Industry Press, 2008) p.125 (张炜, 大学化学  (北京, 化学工业出版社, 2008) p.125) 14 WANG Haitang, SHI Qingliang, University Chemistry, 1, (Beijing, Chemical Industry Press, 2002) p.24 (王海棠, 时清亮,  大学化学, 1, (西安, 西北工业大学出版社, 2002) p.24)
[1] YANG Dongtian, XIONG Liangyin, LIAO Hongbin, LIU Shi. Improved Design of CLF-1 Steel Based on Thermodynamic Simulation[J]. 材料研究学报, 2023, 37(8): 590-602.
[2] JIANG Shuimiao, MING Kaisheng, ZHENG Shijian. A Review on Grain Boundary Segregation, Interfacial Phase and Mechanical Property Adjusting-controlling for Nanocrystalline Materials[J]. 材料研究学报, 2023, 37(5): 321-331.
[3] YAN Chunliang, GUO Peng, ZHOU Jingyuan, WANG Aiying. Electrical Properties and Carrier Transport Behavior of Cu Doped Amorphous Carbon Films[J]. 材料研究学报, 2023, 37(10): 747-758.
[4] SUN Yi, HAN Tongwei, CAO Shumin, LUO Mengyu. Tensile Properties of Fluorinated Penta-Graphene[J]. 材料研究学报, 2022, 36(2): 147-151.
[5] LU Xiaoqing,ZHANG Quande,WEI Shuxian. Theoretical Study on Photoelectric Characteristic of A-π-D-π-A Indole-based Dye Sensitizers[J]. 材料研究学报, 2020, 34(1): 50-56.
[6] Xuexiong LI,Dongsheng XU,Rui YANG. CPFEM Study of High Temperature Tensile Behavior of Duplex Titanium Alloy[J]. 材料研究学报, 2019, 33(4): 241-253.
[7] Li HUANG. Stability and Heat storage Capacity of Phase Change Emulsion Paraffin/Water[J]. 材料研究学报, 2017, 31(10): 789-795.
[8] Liang ZHU,Jing WANG,Xiaohui LI,Hongbo SUO,Yiliang ZHANG. R-S-N Mathematical Model Based on TC18 by BW High Cycle Fatigue Test Data[J]. 材料研究学报, 2015, 29(9): 714-720.
[9] Yang CHEN,Cheng QIAN,Zhitang SONG,Guoquan MIN. Measurement of Compressive Young’s Modulus of Polymer Particles Using Atomic Force Microscopy[J]. 材料研究学报, 2014, 28(7): 509-514.
[10] Guiqin YU,Jianjun LIU,Yongmin LIANG. Synthesis and Tribological Performance of Guanidinium Ionic Liquids as Lubricants for Steel /Steel Contacts[J]. 材料研究学报, 2014, 28(6): 448-454.
[11] Xiaogang WANG,Yueyi LI,Hailan WANG,Cunlong ZHOU,Qinxue HUANG. Numerical Modeling for Roller Leveling Process of Bimetal-Plate[J]. 材料研究学报, 2014, 28(4): 308-313.
[12] Wu YAO,Mengxue WU,Yongqi WEI. Determination of Reaction Degree of Silica Fume and Fly Ash in a Cement - silica fume - fly ash Ternary Cementitious System[J]. 材料研究学报, 2014, 28(3): 197-203.
[13] Ruwu WANG,Jing LIU,Zhanghua GAN,Chun ZENG,Fengquan ZHANG. Crystallization Kinetics of Amorphous Alloys Fe73.5Si13.5-xGexB9Cu1Nb3(x=3, 6)[J]. 材料研究学报, 2014, 28(3): 204-210.
[14] Lei LI,Ke QIN,Haitao ZHANG,Zhihao ZHAO,Qingfeng ZHU,Yubo ZUO,Jianzhong CUI. Crystallographic Features of a Solidified Hypoeutectic Zn-4.45%Al Alloy[J]. 材料研究学报, 2014, 28(2): 126-132.
[15] Yanen WANG,Qinghua WEI,Mingming YANG,Shengmin WEI. Molecular Dynamics Simulation of Mechanical Properties and Surface Interaction for HA/NBCA[J]. 材料研究学报, 2014, 28(2): 133-138.
No Suggested Reading articles found!