|
|
The effect of preparation parameters on the structure and catalytic performance of Ce–Pt–Pd/SSWM stainless steel wire mesh catalyst |
SONG Cui1; CHEN Min1; MA Ying1; MA Chun'an2; ZHENG Xiaoming1 |
1.Department of Chemistry; Zhejiang University; Hangzhou 310028
2.State Key Laboratory Breeding Base for Green Chemistry Synthesis Technology; Zhejiang University of Technology; Hangzhou 310032 |
|
Cite this article:
SONG Cui CHEN Min MA Ying MA Chun'an ZHENG Xiaoming. The effect of preparation parameters on the structure and catalytic performance of Ce–Pt–Pd/SSWM stainless steel wire mesh catalyst. Chin J Mater Res, 2009, 23(5): 508-512.
|
Abstract A new type of catalyst consisting of a porous anodic oxidation membrane formed on the surface of stainless steel wire mesh and active compounds of cerium, platinum and palladium dispersed on the support surface was successfully prepared. The catalyst shows good activity for the oxidation of toluene, acetone and ethyl acetate. The results show that the operating parameters affect the formation of porous anodic oxidation membrane and thereby affect the catalytic activity subsequent. The catalyst, prepared by using 10% H2SO4 as electrolyte and current density 1.0 A, shows a good catalytic activity and stability.
|
Received: 19 January 2009
|
|
Fund: Supported by National Natural Science Foundation of China No.20577042 and the Opening Foundation of Zhejing Provincial Top Key Discipline. |
1 A.P.Jones, Indoor air quality and health, Atmospheric Environment, 33(28), 4535(1999)
2 J.I.Gutierrez–Ortiz, B.de Rivas, R.Lopez–Fonseca, J. R.Gonzalez–Velasco, Catalytic purification of waste gases
containing VOC mixtures with Ce/Zr solid solutions, Applied Catalysis B–Environmental, 65(3–4), 191(2006)
3 C.Q.Hu, Q.S.Zhu, Z.Jiang, Y.Y.Zhang, Y.Wang, Preparation and formation mechanism of mesoporous CuO–CeO2 mixed oxides with excellent catalytic performance for removal of VOCs. Microporous and Mesoporous Materials, 113(1–3), 427(2008)
4 GUO Jianguang, LI Zhong, XI Hongxia, HE Yusheng, WANG Boguang, Activity comparison of three transition metal catalysts used in the catalytic combustion of VOCs, Journal of South China University of Technology (Natural Science), 32(5), 56(2004)
(郭建光, 李 忠, 奚红霞, 何余生, 王伯光, 催化燃烧VOCs的三种过渡金属催化剂的活性比较, 华南理工大学学报, 32(5), 56(2004))
5 Y.Ma, M.Chen, C.Song, X.M.Zheng, Catalytic oxidation of toluene, acetone and ethyl acetate on a new Pt–Pd/stainless steel wire mesh catalyst, Acta Physico–Chimica Sinica, 24(7), 1132(2008)
6 XIE Jing, LU Hanfeng, LIU Huayan, LI Qiuju, CHEN Yinfei, Preparation and characterization of wire–mesh catalyst coated by La(0.8)Sr(0.2)MnO3, Journal of Inorganic Materials, 22(6), 1221(2007)
(谢 晶, 卢晗锋, 刘华彦, 李秋菊, 陈银飞, 金属丝网型La(0.8)Sr(0.2)MnO3催化剂的制备及其表征, 无机材料学报, 22(6), 1221(2007))
7 D.Andreeva, T.Tabakova, L.Ilieva, A.Naydenov, D.Mehanjiev, M. V. Abrashev, Nanosize gold catalysts promoted by vanadium oxide supported on titania and zirconia for complete benzene oxidation, Applied Catalysis A: General, 209(1–2), 291(2001)
8 H.Q.Zhu, Z.F.Qin, W.J.Shan, W.J.Shen, J.G.Wang, Pd/CeO2–TiO2 catalyst for CO oxidation at low temperature: a TPR study with H2 and CO as reducing agents, Journal of Catalysis, 225(2), 267(2004)
9 R.J.Farrauto, J.K.Lampert, M.C.Hobson, E.M.Waterman, Thermal–decomposition and reformation of PdO catalysis–support effects, Applied Catalysis B: Environmental, 6(3), 263(1995) |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|