Chin J Mater Res  1993, Vol. 7 Issue (6): 502-506    DOI:

Current Issue | Archive | Adv Search |

RELATIONS BETEWEEN Δr VALUE AND TEXTURE OF DEEP DRAWING CONTAINING PHOSPHORUS STEEL

HUANG Liming;ZHANG Kui(Anshan Iron and Steel Complex)ZAO Xiang;LIANG Zhide(Northeast University of Technology)

HUANG Liming;ZHANG Kui(Anshan Iron and Steel Complex)ZAO Xiang;LIANG Zhide(Northeast University of Technology). RELATIONS BETEWEEN Δr VALUE AND TEXTURE OF DEEP DRAWING CONTAINING PHOSPHORUS STEEL. Chin J Mater Res, 1993, 7(6): 502-506.

Abstract References Related Articles Recommended Metrics Download:  PDF(267KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The relations between △r value and texture of deep drawing phosphorus con-taining steels have been studied.It is concluded that △r value depends on{111}whichparalled to the rolling direction.The △r value is regressed respectively by(△V/V_({111}<112>) Key words:  Δr value      texture      ODF      volume percent fraction      Wlmn      Received:  25 December 1993      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1993/V7/I6/502 1 李文达。冶金物理测试,1983;5:52 2 梁志德,徐家桢,王福.织构的三维取向分析术-ODF 分析,沈阳:东北工学院出版社,1986;103 3 Davies C J.钢铁研究情报,武汉钢铁公司钢研所科技情报室,1987;20:174 4 Sanak M,Darmann C.International Metais Reviews,1982;27:6 5 Hutchinson W B.International Metals Reviews,1984;29:1 [1] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696. [2] LIU Dongyang, TONG Guangzhe, GAO Wenli, WANG Weikai. Anisotropy of 2060 Al-Li Alloy Thick Plate[J]. 材料研究学报, 2023, 37(3): 235-240. [3] WANG Wei, ZHOU Shanqi, GONG Penghui, ZHANG Haoze, SHI Yaming, WANG Kuaishe. Effect of Anneal Treatment on Microstructure, Texture and Mechanical Properties of TC4 Alloy Plates[J]. 材料研究学报, 2023, 37(1): 70-80. [4] NING Bo, LI Zhichao, WU Huibin, ZHANG Bingjun, HUANG Manli, DING Chao. Mechanism of Improving Low Temperature Impact Toughness of 09MnNi Vessel Steel[J]. 材料研究学报, 2022, 36(9): 660-666. [5] YUAN Qiangqiang, WANG Zhigang, JIANG Yongfang, ZHANG Yinghui, HUANG Ankang, YE Jieyun. Effect of Warm-rolled Temperature on Microstructure and Texture in Cr-Ti-B Low Carbon Steel[J]. 材料研究学报, 2022, 36(2): 81-89. [6] GU Jiaqing, TANG Weineng, XU Shiwei. Microstructure Evolution During Tensile Deformation of an Extruded Mg-0.4Zn Alloy Plate[J]. 材料研究学报, 2021, 35(7): 553-560. [7] XI Guoqiang, QIU Jianke, LEI Jiafeng, MA Yingjie, YANG Rui. Room Temperature Creep Behavior of Ti-6Al-4V Alloy[J]. 材料研究学报, 2021, 35(12): 881-892. [8] FU Yongjun,LEI Jialiu,LIAO Qingling,ZHAO Dongnan,ZHANG Yucheng. Effect of Residual Carbon on Primary and Secondary Recrystallization of Grain-oriented Silicon Steel[J]. 材料研究学报, 2020, 34(2): 118-124. [9] Shuai DAI,Feng WANG,Zhi WANG,Zheng LIU,Pingli MAO. Effect of Cu Addition on Microstructure, Mechanical Property and Texture Evolution of Extrusion-shearing ZK60 Mg-alloy[J]. 材料研究学报, 2019, 33(12): 881-891. [10] WU Xiyue,CHEN Zhiyong,CHENG Chao,LIU Jianrong,XU Dongsheng,WANG Qingjiang. Effects of Heat Treatment on Microstructure, Texture and Tensile Properties of Ti65 Alloy[J]. 材料研究学报, 2019, 33(10): 785-793. [11] Wenyuan LI, Jianrong LIU, Zhiyong CHEN, Zibo ZHAO, Qingjiang WANG. Effect of Microstructure and Texture on Room Temperature Strength of Ti60 Ti-Alloy Plate[J]. 材料研究学报, 2018, 32(6): 455-463. [12] Shibo WEN, Wei YANG, Xiangju SHI, Yongfeng LIANG, Feng YE. Effect of Grain Orientation and Ordered Phase on Ductility of Fe-6.5%Si Alloy Wires[J]. 材料研究学报, 2018, 32(4): 315-320. [13] Mingming MA, Feng LIAN, Kang JIANG, Huichen ZHANG. Wettability and Tribological Performance of Texture Surface in Oil and Water[J]. 材料研究学报, 2018, 32(3): 191-199. [14] Xusheng WANG,Guirong YANG,Wenming SONG,Jian LI,Ying MA,Yuan HAO. Microstructure and Wear Resistance of Composite Coatings Ni-Co/WC+G[J]. 材料研究学报, 2017, 31(3): 195-202. [15] Futao DONG, Fei XUE, Linxiu DU, Xianghua LIU. Influence of Carbon Content on Properties of an Ultra-Low Carbon Ti-Bearing Steel for Enameling[J]. 材料研究学报, 2017, 31(12): 887-893. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed