|
|
|
| Effects of hBN Surface Plated Nickel on Properties of Ni-20Cr/hBN Self-lubricating Composites |
| WANG Changchuan, WANG Richu, PENG Chaoqun, FENG Yan, WEI Xiaofeng |
| School of Materials Science and Engineering, Central South University, Changsha 410083 |
|
Cite this article:
WANG Changchuan WANG Richu PENG Chaoqun FENG Yan WEI Xiaofeng. Effects of hBN Surface Plated Nickel on Properties of Ni-20Cr/hBN Self-lubricating Composites. Chin J Mater Res, 2011, 25(5): 509-516.
|
|
|
Abstract Hexagonal boron nitride (hBN) powder was plated with nickel layer by the deposition process with the raw materials of hBN, NaCO3 and NiCl2. The Ni–20Cr/hBN self–lubricating composites were prepared by powder metallurgy with the hBN powder coated Ni and common hBN. The effects of hBN coated with Ni on density, porosity, hardness, strength and the tribological properties of the Ni–20Cr/hBN composites were studied. The results show that the Ni–20Cr/hBN composite with the hBN coated with Ni has better mechanical properties and lower porosities. The density, bending strength and hardnes increase and the porosity decreases. Besides, the composite with hBN coated with Ni has better anti-friction performance in a wide temperature region. At room temperature and 600oC, the friction coefficient changes less, while the wear rate decreases at 600 oC.
|
|
Received: 18 July 2011
|
|
|
| 1 WANG Aifang, ZHANG Dingjun, WU Youzhi, WANG Wenzhen, JIA Junhong, Effects of adding MoS2 and Graphite on Tribological properties of Ni-Cr based selflubricating composites, Chinese Journal of Materials Research, 24(5), 464(2010)(王爱芳, 张定军, 吴有智, 王文珍, 贾均红, MoS2和石墨对Ni-Cr基复合材料摩擦学性能的影响, 材料研究学报, 24(5), 464(2010))2 WANG Zhensheng, ZHOU Lanzhang, GUO Jianting, ZHANG Guangye, LI Huiqiang, HU Zhuangqi, Friction and wear behavior of NiAl–Cr(Mo)–CrxSy self–lubricating composite, Tribology, 30(6), 589(2010)(王振生, 周兰章, 郭建亭, 张光业, 李会强, 胡壮麒, NiAl--Cr(Mo)--CrxSy自润滑复合材料的摩擦磨损特性, 摩擦学报, 30(6), 589(2010))3 TYAGI Rajnesh, XIONG Dangsheng, LI Jianliang, DAI Jihuai, Elevated temperature tribological behavior of Ni based composites containing nano-silver and hBN, Wear, (269), 884(2010)4 LIU Rutie, LI Xibin , ZHAO Fuan, XIONG Yongjun, Study on hot–pressed Ni–Cr–Mo alloy, Powder Metallurgy Industry, 15(2), 43(2005)(刘如铁, 李溪滨, 赵福安, 熊拥军, 热压镍铬钼合金的研究, 粉末冶金工业, 15(2), 43(2005))5 FENG Yan, WANG Richu, YU Kun, Analyses of frictional wear mechanics of Ni–Cr/BN self–lubricating composites, Rare Metal Material and Engineering, 36(10), 1820(2007)(冯 艳, 王日初, 余 琨, Ni--Cr/BN自润滑材料摩擦磨损机理分析, 稀有金属材料与工程, 36(10), 1820(2007))6 KONG Xiaoli, LIU Yongbing, LU You, HUO Fuxiang, P/M metal–matrix high–temperature solid self–lubricating materials, Powder Metallurgy Technology, 19(2), 86(2001)(孔晓丽, 刘勇兵, 陆 有, 霍福祥, 粉末冶金高温金属基固体自润滑材料, 粉末冶金技术, 19(2), 86(2001))7 WEI Shengming, WANG Richu, LI Qingyong, LI Wenxian, HUANG Boyun, Effect of BN on sintering properties of Ni–based abradable seal alloy, Rare Metal Material and Engineering, 35(1), 127(2006)(魏圣明, 王日初, 李庆勇, 黎文献, 黄伯云, BN对镍基可磨耗密封材料烧结性能的影响, 稀有金属材料与工程, 35(1), 127(2006)) 8 JIANG Bingyu, LIU Shimin, WANG Richu, LUO Fenghua, Effect of BN on mechanical and tribological properties of BN/Ni(Cr) self–lubricating composites, Materials Science and Engineering of Powder Metallurgy, 14(1), 58(2009)(蒋冰玉, 刘世民, 王日初, 罗丰华, BN含量对BN/Ni(Cr)自润滑材料力学及摩损性能的影响, 粉末冶金材料科学与工程, 14(1), 58(2009))9 WEI Xiaofeng, WANG Richu, PENG Chaoqun, FENG Yan, Effect of BN surface plated nickel on sintering properties of Ni-Cr/BN antifriction sealing material, Journal of Central South University: Science and Technology, 41(1), 150(2010)(韦小凤, 王日初, 彭超群, 冯 艳, BN表面镀镍对Ni--Cr/BN减摩密封材料烧结性能的影响, 中南大学学报: 自然科学版, 41(1), 150(2010))10 QU Jinkun, HUANG Zixun, Electroless Nickel Plating, 1, (Beijing, Beijing Aviation Institute Press, 1987) p.4-12(瞿金坤, 黄子勋, 化学镀镍, 1, (北京, 北京航空学院出版社, 1987) p.4-12)11 LI Fan, ZHAO Xiaofeng, ZHANG Dengjun, LI Baohou, LUO Shimin, Kinetics of chemically plating nickel on the surface of hexagonal boron nitride Micro-particles, The Chinese Journal of Process Engineering, 2(5), 425(2002) (李 钒, 赵晓峰, 张登君, 李报厚, 罗世民, 六方BN微颗粒表面化学镀镍的动力学, 过程工程学报, 2(5), 425(2002))12 SONG Jieguang, JI Gangchang, LI Shibin, LI Yangliang, BAI Xiaobo, DU Daming, ZHANG Lianmeng, Review on coating technology of powder, Materials Review: Nanometer and New Materials Album, 23(5), 164(2009)(宋杰光, 纪岗昌, 李世斌, 李养良, 白小波, 杜大明, 张联盟, 粉体包覆技术的研究进展, 材料导报: 纳米与新材料专辑, 23(5), 164(2009))13 CHEN Caifeng, CHEN Zhigang, WANG Andong, ZHAO Xiaobing, Preparation of nano–Ni–coated Al2O3 composite powder, Journal of Jiangsu University: Natural Science Edition, 26(5), 429(2005)(陈彩凤, 陈志刚, 王安东, 赵晓兵, Ni包裹纳米α--Al2O3复合粉体的制备, 江苏大学学报: 自然科学版, 26(5), 429(2005))14 SHAO Gang, WEN Hejing, LIU Zhongsheng, ZHAO Peixiong, HOU Tiecui, WANG Hailong, ZHANG Rui, Effects of different sintering processes on properties of SiCp/Fe cermets, Rare Metal Materials and Engineering, 38(2), 518(2009)(陈彩凤, 陈志刚, 王安东, 赵晓兵, Ni包裹纳米α--Al2O3复合粉体的制备, 江苏大学学报: 自然科学版, 26(5), 429(2005))15 LU Hongxia, CHEN Changping, YANG Huizhi, SUN Hongwei, HU Xing, Aluminum matrix composites strengthened by Cu coating alumina, Materials For Mechanical Engineering, 29(9), 28(2005)(卢红霞, 陈昌平, 杨会智, 孙洪巍, 胡 行, 铜包裹氧化铝粉体增强铝基复合材料的研究, 机械工程材料, 29(9), 28(2005))16 HUANG Peiyun, Principles of Powder Metallurgy, 2, (Beijing, Metallurgical Industry Press, 1997) p.268, 304-306(黄培云, 粉末冶金原理, 2, (北京, 冶金工业出版社, 1997) p.268,304-306)17 DU Chunkuan, YIN Yanguo, LIU Kun, ZHENG Zhixiang, Surface globuling and interfacial combination with copper matrix of graphite coated with nickel, Materials for Mechanical Engineering, 31(4), 25(2007)(杜春宽, 尹延国, 刘 焜, 郑治祥, 镀镍石墨粉表面球化及与铜合金基体界面结合的研究, 机械工程材料, 31(4), 25(2007))18 LIU Rutie, LI Xibin, CHENG Shihe, General situation of some metal–matrix solid self–lubricating material, Powder Metallurgy Industry, 11(3), 52(2001)(刘如铁, 李溪滨, 程时和, 金属基固体自润滑材料的研究概况, 粉末冶金工业, 11(3), 52(2001))19 WEN Shizhu, HUANG Ping, Principles of Tribology, 2, (Beijing, Tsinghua University Press, 2002) p.304-311, 315 (温诗铸, 黄 平, 摩擦学原理, 2, (北京, 清华大学出版社, 2002) p.304-311, 315)20 XIANG Dinghan, PAN Qinglin, YAO Zhengjun, Design theory and friction experiment for brass-plastic selflubricating composite, Chinese Journal of Materials Research, 17(5), 549(2003)(向定汉, 潘清林, 姚正军, 铜--塑自润滑复合材料的设计和性能, 材料研究学报, 17(5), 549(2003))21 LI Xibin, LIU Rutie, CHENG Shihe, LI Meiying, Effects of porosity tribological characteristics in the sintered material, Lubrication Engineering, (1),34(2002)(李溪滨, 刘如铁, 程时和, 李美英, 烧结材料中孔隙度对摩擦学特性的影响, 润滑与密封, (1),34(2002)) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
