Please wait a minute...
Chin J Mater Res  2010, Vol. 24 Issue (6): 625-630    DOI:
论文 Current Issue | Archive | Adv Search |
Study on the Tribological Properties of Polyetheretherketone Composites Reinforced by ZrO2 Particles and Short Carbon Fibers under Water Lubrication
ZHONG Yingjie, XIE Guangyou, SUN Zhaosong, SUI Guoxin
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016
Cite this article: 

ZHONG Yingjie XIE Guangyou SUN Zhaosong SUI Guoxin. Study on the Tribological Properties of Polyetheretherketone Composites Reinforced by ZrO2 Particles and Short Carbon Fibers under Water Lubrication. Chin J Mater Res, 2010, 24(6): 625-630.

Download:  PDF(971KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  PEEK matrix composites filled with short carbon fibers (CF) and ZrO2 particles were compounded using a twin-screw extruder followed by injection molding. The tribological properties of the PEEK/CF/ZrO2 composites under the water lubrication were systematically studied. It was revealed that the hybrid composites exhibit excellent wear-resistance in the water conditions. The friction coefficients of the composites slightly changed with increasing of the applied load, while the wear rates of the hybrid composites decreased with increasing applied load. Main wear mechanism of the composites in water was mild abrasive wear and fatigue wear. The high wear resistance of the composites should be attributed to the existence of the carbon fibers: the carbon fibers carried the main load between the contact surfaces and protected the soft polymer matrix from further severe impact and abrasion of the counterpart. The incorporation of the ZrO2 particles could effectively inhibit the carbon fiber failure and debonding, which resulted in a better wear resistance property of the hybrid PEEK composites compared with sole CF reinforced PEEK composites. However, high loading of the particles would also aggravate the fatigue wear of the composites and lead to a deterioration of the wear resistance of the composites.
Key words:  composite        polyetheretherketone       friction and wear       hybrid reinforcemen       carbon fiber       water lubrication     
Received:  18 May 2010     
ZTFLH: 

TB332

 

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2010/V24/I6/625

1 焦素娟 周华 杨华勇 龚国芳 陈建敏 周惠娣, 填充聚醚醚酮复合材料在水润滑下的摩擦学特性研究, 摩擦学学报, 23, 385-389(2003) 2 潘育松 熊党生, 聚醚醚酮复合材料摩擦学性能研究现状, 工程塑料应用, 34, 68-70(2006) 3 张志毅 章明秋, 聚醚醚酮摩擦磨损行为和机理的研究, 复合材料学报, 12, 49-54(1995) 4 Prehn R, Haupert F, Friedrich K, Sliding wear performance of polymer composites under abrasive and water lubricated conditions for pump applications, Wear, 259, 693-696(2005) 5 Yamamoto Y, Takashima T, Friction and wear of water lubricated PEEK and PPS sliding contacts, Wear, 253, 820-826(2002) 6 Yamamoto Y, Hashimoto M, Friction and wear of water lubricated PEEK and PPS sliding contacts - Part 2. Composites with carbon or glass fibre, Wear, 257, 181-189(2004) 7 Unal H, Mimaroglu A, Friction and wear characteristics of PEEK and its composite under water lubrication, Journal of Reinforced Plastics and Composites, 25, 1659-1667(2006) 8 Davim JP, Marques N, Baptista AM, Effect of carbon fibre reinforcement in the frictional behaviour of Peek in a water lubricated environment, Wear, 251, 1100-1104(2001) 9 Chang L, Zhang Z, Breidt C, Friedrich K, Tribological properties of epoxy nanocomposites - I. Enhancement of the wear resistance by nano-TiO2 particles, Wear, 258, 141-148(2005) 10 Chang L, Zhang Z, Tribological properties of epoxy nanocomposites - Part II. A combinative effect of short carbon fibre with nano-TiO2, Wear, 260, 869-878(2006) 11 Chang L, Zhang Z, Ye L, Friedrich K, Tribological properties of high temperature resistant polymer composites with fine particles, Tribology International, 40, 1170-1178(2007) 12 Zhang G, Chang L, Schlarb AK, The roles of nano-SiO2 particles on the tribological behavior of short carbon fiber reinforced PEEK, Composites Science and Technology, 69, 1029-1035(2009) 13 Wang JX, Gu MY, Wear properties and mechanisms of nylon and carbon-fiber-reinforced nylon in dry and wet conditions, Journal of Applied Polymer Science, 93, 789-795(2004) 14 Borruto A, Crivellone G, Marani F, Influence of surface wettability on friction and wear tests, Wear, 222, 57-65(1998) 15 Jia J, Chen J, Zhou H, Hu L, Comparative study on tribological behaviors of polyetheretherketone composite reinforced with carbon fiber and polytetrafluoroethylene under water-lubricated and dry-sliding against stainless steel, Tribology Letters, 17, 231-238(2004) 16 Jiang ZY, Gyurova LA, Schlarb AK, Friedrich K, Zhang Z, Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particles, Composites Science and Technology, 68, 734-742(2008)
[1] PAN Xinyuan, JIANG Jin, REN Yunfei, LIU Li, LI Jinghui, ZHANG Mingya. Microstructure and Property of Ti / Steel Composite Pipe Prepared by Hot Extrusion[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] LIU Ruifeng, XIAN Yunchang, ZHAO Rui, ZHOU Yinmei, WANG Wenxian. Microstructure and Properties of Titanium Alloy/Stainless Steel Composite Plate Prepared by Spark Plasma Sintering[J]. 材料研究学报, 2023, 37(8): 581-589.
[3] JI Yuchen, LIU Shuhe, ZHANG Tianyu, ZHA Cheng. Research Progress of MXene Used in Lithium Sulfur Battery[J]. 材料研究学报, 2023, 37(7): 481-494.
[4] WANG Wei, XIE Zelei, QU Yishen, CHANG Wenjuan, PENG Yiqing, JIN Jie, WANG Kuaishe. Tribological Properties of Graphene/SiO2 Nanocomposite as Water-based Lubricant Additives[J]. 材料研究学报, 2023, 37(7): 543-553.
[5] ZHANG Tengxin, WANG Han, HAO Yabin, ZHANG Jiangang, SUN Xinyang, ZENG You. Damping Enhancement of Graphene/Polymer Composites Based on Interfacial Interactions of Hydrogen Bonds[J]. 材料研究学报, 2023, 37(6): 401-407.
[6] SHAO Mengmeng, CHEN Zhaoke, XIONG Xiang, ZENG Yi, WANG Duo, WANG Xuhui. Effect of Si2+ Ion Beam Irradiation on Performance of C/C-ZrC-SiC Composites[J]. 材料研究学报, 2023, 37(6): 472-480.
[7] DU Feifei, LI Chao, LI Xianliang, ZHOU Yaoyao, YAN Gengxu, LI Guojian, WANG Qiang. Preparation of TiAlTaN/TaO/WS Composite Coatings by Magnetron Sputtering and their Cutting Properties on Titanium Alloy[J]. 材料研究学报, 2023, 37(4): 301-307.
[8] ZHANG Jinzhong, LIU Xiaoyun, YANG Jianmao, ZHOU Jianfeng, ZHA Liusheng. Preparation and Properties of Temperature-Responsive Janus Nanofibers[J]. 材料研究学报, 2023, 37(4): 248-256.
[9] WANG Gang, DU Leilei, MIAO Ziqiang, QIAN Kaicheng, DU Xiangbowen, DENG Zeting, LI Renhong. Interfacial Properties of Polyamide 6-based Composites Reinforced with Polydopamine Modified Carbon Fiber[J]. 材料研究学报, 2023, 37(3): 203-210.
[10] LIN Shifeng, XU Dongan, ZHUANG Yanxin, ZHANG Haifeng, ZHU Zhengwang. Preparation and Mechanical Properties of TiZr-based Bulk Metallic Glass/TC21 Titanium Alloy Dual-layered Composites[J]. 材料研究学报, 2023, 37(3): 193-202.
[11] MIAO Qi, ZUO Xiaoqing, ZHOU Yun, WANG Yingwu, GUO Lu, WANG Tan, HUANG Bei. Pore Structure, Mechanical and Sound Absorption Performance for Composite Foam of 304 Stainless Steel Fiber/ZL104 Aluminum Alloy[J]. 材料研究学报, 2023, 37(3): 175-183.
[12] ZHANG Kaiyin, WANG Qiuling, XIANG Jun. Microwave Absorption Properties of FeCo/SnO2 Composite Nanofibers[J]. 材料研究学报, 2023, 37(2): 102-110.
[13] ZHOU Cong, ZAN Yuning, WANG Dong, WANG Quanzhao, XIAO Bolv, MA Zongyi. High Temperature Properties and Strengthening Mechanism of (Al11La3+Al2O3)/Al Composite[J]. 材料研究学报, 2023, 37(2): 81-88.
[14] LUO Yu, CHEN Qiuyun, XUE Lihong, ZHANG Wuxing, YAN Youwei. Preparation of Double-layer Carbon Coated Na3V2(PO4)3 as Cathode Material for Sodium-ion Batteries by Ultrasonic-assisted Solution Combustion and Its Electrochemical Performance[J]. 材料研究学报, 2023, 37(2): 129-135.
[15] LIU Zhihua, YUE Yuanchao, QIU Yifan, BU Xiang, YANG Tao. Preparation of g-C3N4/Ag/BiOBr Composite and Photocatalytic Reduction of Nitrate[J]. 材料研究学报, 2023, 37(10): 781-790.
No Suggested Reading articles found!