DEFORMATION AND FRACTURE OF FREE-CUTTING PHASE CONTAINING RE DURING HOT WORKING

Chin J Mater Res

1992, Vol. 6

Issue (2): 129-132 DOI:

Current Issue | Archive | Adv Search

DEFORMATION AND FRACTURE OF FREE-CUTTING PHASE CONTAINING RE DURING HOT WORKING

JIANG Laizhu;CUI Kun(Huazhong University of Science and Technology)

Cite this article:

JIANG Laizhu;CUI Kun(Huazhong University of Science and Technology). DEFORMATION AND FRACTURE OF FREE-CUTTING PHASE CONTAINING RE DURING HOT WORKING. Chin J Mater Res, 1992, 6(2): 129-132.

Download:

PDF(593KB)
Export: BibTeX | EndNote (RIS)

Abstract There exists the deformation and fracture cycle of two types of free-cuttingphase:MnS-RE_2S_3 and(Mn,Ca)S-RE_2S_3 during hot working,as the interface between thephases in them is open,the complex phase may split.

Key words: free-cutting phase deformation fracture hot working

Received: 25 April 1992

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1992/V6/I2/129

1 江来珠,孙培祯,崔昆.材料科学进展,1990;4(1) :43
2 江来珠,孙培祯,崔昆.钢铁,1989;24(9) :38
3 江来珠.华中理工大学博士学位论文,1990
4 余宗森等.钢中稀土.北京:冶金工业出版社;1982
5 Baker T J et al.Met Technol,1975;2(11) :51

[1]	ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667.
[2]	LIU Ruifeng, XIAN Yunchang, ZHAO Rui, ZHOU Yinmei, WANG Wenxian. Microstructure and Properties of Titanium Alloy/Stainless Steel Composite Plate Prepared by Spark Plasma Sintering[J]. 材料研究学报, 2023, 37(8): 581-589.
[3]	LIU Tao, YIN Zhiqiang, LEI Jingfa, GE Yongsheng, SUN Hong. Plastic Deformation Behavior of Selective Laser Melting 316L Stainless Steel under High Strain Rate Compression[J]. 材料研究学报, 2023, 37(5): 391-400.
[4]	ZHOU Zhangrui, LV Peisen, ZHAO Guoqi, ZHANG Jian, ZHAO Yunsong, LIU Lirong. Stress Rupture Deformation Mechanism of Two "Replacement of Re by W" Type Low-cost Second-generation Nickel Based Single Crystal Superalloys at Elevated Temperatures[J]. 材料研究学报, 2023, 37(5): 371-380.
[5]	DONG Yu'ang, YANG Huajie, BEN Dandan, MA Yunrui, ZHOU Xianghai, WANG Bin, ZHANG Peng, ZHANG Zhefeng. Excellent Cryogenic Tensile Properties of Ultra-fine Grained 316L Stainless Steel after Electropulsing Treatment in Liquid Nitrogen[J]. 材料研究学报, 2023, 37(3): 168-174.
[6]	YU Sen, CHEN Leli, LUO Rui, YUAN Zhizhong, WANG Shuang, GAO Pei, CHENG Xiaonong. Dynamic Recrystallization and Microstructure Evolution Mechanism of GH4169 Alloy[J]. 材料研究学报, 2023, 37(3): 211-218.
[7]	ZOU Tianchun, JU Yuezhang, LI Longhui, FU Ji. Effect of Stacking Sequences on Bonding Performance of CFRP-Al Single-lap Joint[J]. 材料研究学报, 2022, 36(9): 715-720.
[8]	ZHOU Haitao, HOU Xiangwu, WANG Yanbo, XIAO Lv, YUAN Yong, SUN Jingli. High-temperature Deformation Behavior and Properties of High Nb Containing TiAl Alloy[J]. 材料研究学报, 2022, 36(6): 471-480.
[9]	ZHANG Yiming, ZHAO Ziyan, MU Juan. Effect of Nb Addition on Properties of TiZr-based Amorphous Alloys[J]. 材料研究学报, 2022, 36(6): 401-408.
[10]	WANG Jun, WANG Kelu, LU Shiqiang, LI Xin, OUYANG Delai, QIU Qian, GAO Xin, ZHANG Kaiming. Strain Compensation Physical Constitutive Model and Processing Map of TA5 Titanium Alloy[J]. 材料研究学报, 2022, 36(3): 175-182.
[11]	LIU Ming, WU Jianan. Scratch Behavior of Materials under Progressive Load by Conical Indenter[J]. 材料研究学报, 2022, 36(3): 191-205.
[12]	YUAN Qiangqiang, WANG Zhigang, JIANG Yongfang, ZHANG Yinghui, HUANG Ankang, YE Jieyun. Effect of Warm-rolled Temperature on Microstructure and Texture in Cr-Ti-B Low Carbon Steel[J]. 材料研究学报, 2022, 36(2): 81-89.
[13]	CUI Zhiqiang, ZHANG Ningfei, WANG Jie, HOU Qingyu, HUANG Zhenyi. High Temperature Compression Deformation Behavior of 9Mn27Al10Ni3Si Low Density Steel[J]. 材料研究学报, 2022, 36(12): 907-918.
[14]	LIU Chao, WANG Xin, MEN Yue, ZHANG Haoyu, ZHANG Siqian, ZHOU Ge, CHEN Lijia, LIU Haijian. Dynamic Recrystallization of Ti-6Al-4V Alloy During Hot Compression[J]. 材料研究学报, 2021, 35(8): 583-590.
[15]	PAN Xiaoyu, YANG Yinhui, NI Ke, CAO Jianchun, QIAN Hao. Microstructure and Recrystallization Behavior of 18.5%Cr High-Mn Low-Ni Type Duplex Stainless Steel during Hot Compression with Large Deformation[J]. 材料研究学报, 2021, 35(5): 381-393.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed