铝粉烧结材料等通道转角挤压的性能演变

材料研究学报

2009, Vol. 23

Issue (6): 577-581

研究论文

本期目录 | 过刊浏览

铝粉烧结材料等通道转角挤压的性能演变

李萍; 薛克敏; 周明智

合肥工业大学材料科学与工程学院合肥 230009

Microstructure and properties evolution and mechanism analysis of sintered aluminum powder during equal channel angular expression

LI Ping; XUE Kemin; ZHOU Mingzhi

School of Materials Science and Engineering; Hefei University of Technology; Hefei 230009

引用本文:

李萍薛克敏周明智. 铝粉烧结材料等通道转角挤压的性能演变[J]. 材料研究学报, 2009, 23(6): 577-581.
, , . Microstructure and properties evolution and mechanism analysis of sintered aluminum powder during equal channel angular expression[J]. Chin J Mater Res, 2009, 23(6): 577-581.

全文: PDF(894 KB)

摘要:

对不同路径和不同道次下铝粉烧结材料的等通道转角挤压工艺进行了试验研究, 用光学显微镜、扫描电子显微镜和透射电镜分析了粉末烧结材料在不同工艺条件下的晶粒细化规律和致密行为, 并测量了挤压后试样的密度和硬度等性能. 结果表明, 等通道转角挤压工艺对粉末烧结材料具有很强的致密效果和细化效果, 可显著提高其力学性能. 在单道次变形中, 大剪切塑性变形和高静水压力状态是粉末烧结材料获得良好的致密效果的关键; 在多道次变形中, 变形量的累积和不同的剪切特征不断地改变内部的孔隙形状, 使内部基体材料进一步致密. 而晶粒的细化效果则取决于变形中的静水压力、变形量和剪切特征等关键因素.

关键词 ：材料合成与加工工艺, 粉末烧结材料, 等通道转角挤压, 组织性能, 致密和细化晶粒

Abstract：

Experiments of ECAE were conducted for pure aluminum powder sintered material under different routes and passes. The grain refinement regulation and densification behavior of powder material during ECAE were deeply investigated under different conditions with optical telescope, scan electronic telescope and transmission electronic telescope. The density and hardness of the extruded samples were measured. The experiment results show that ECAE has powerful densification and refinement effects and the mechanical properties of powder materials are improved In single ECAE, large shear plastic deformation and high hydrostatic stress state are the key factors to obtain high density material In multiple passes ECAE, the inner pore shape is changed and the powder material is compacted further by the accumulated deformation and different shear deformation characters. The grain refinement effect depends on some key factors such as hydrostatic stress, strain and shear deformation character etc.

Key words： synthesizing and processing technics sintered powder material equal channel angular extrusion microstructure and properties densification and grain refinement

收稿日期: 2009-01-19

ZTFLH:

TG376

基金资助:

国家自然科学基金50875072资助项目.

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李萍
	薛克敏
	周明智
44.8K

链接本文:

https://www.cjmr.org/CN/ 或 https://www.cjmr.org/CN/Y2009/V23/I6/577

1 R.Z.Valiev, R.K.Islamgaliev, I.V.Alexandrov, Bulk nanostructured materials from severe plastic deformation, Progress in Materials Science, 45(2), 103(2000)
2 R.Z.Valiev, T.G.Langdon, Principles of equal-channel angular pressing as a processing tool for grain refinement, Progress in Materials Science, 51(7), 881(2006)
3 R.Z.Valiev, N.A.Krasilnikov, N.K.Tsenev, Plastic deformation of alloys with submicron grained structure, Materials Science and Engineering A, 137(15), 35(1991)
4 O.N.Senkov, S.V.Senkov, J.M.Scott, D.B.Miracle, Compaction of amorphous aluminum alloy powder by direct extrusion and equal channel angular extrusion, Materials Science and Engineering A, 393(1-2), 12(2005)
5 K.Matsuki, T.Aida, T.Takeucki, J.Kusui, K.Yokoe, Microstructural characteristics and superplastic-like behavior in aluminum powder alloy consolidated by equalchannel angular pressing, Acta Materialia, 48(10), 2625(2000)
6 S.Y.Chang, K.S.Lee, S.H.Choi, D.H.Shin, Effect of ECAP on microstructure and mechanical properties of a commercial 6061Al alloy produced by powder metallurgy, Journal of Alloys and Compounds, 354(1-2), 216(2003)
7 K.Xia, X.Wu, Back pressure equal channel angular consolidation of pure Al particles, Scripta Materialia, 53(11), 1225(2005)
8 M.Haouaoui, I.Karaman, H.J.Maier, K.T.Hartwiq, Microstructure evolution and mechanical behavior of bulk copper obtained by consolidation of micro-and nanopowders using equal-channel angular extrusion, Metallurgical and materials transactions A, 35(9), 2936(2004)
9 J.P.Mathieu, S.Suwas, A.Eberhardt, L.S.T´oth, P.Moll, A new design for equal channel angular extrusion, Journal of Materials Processing Technology, 173(1), 29(2006)
10 M.Furukawa, Z.Horita, M.Nemoto, T.G.Longdon, Processing of metals by equal channel angular pressing, Journal of Materials Science, 36(12), 2835(2001)
11 T.G.Langdon, M.Furukawa, M.Nemoto, Z.Horita, Ultrafinegrained microstructure evolving during severe plastic deformation, JOM, 52(4), 30(2000)
12 Y.T.Zhu, T.C.Lowe, Observations and issues on mechanisms of grain refinement during ECAP process, Materials Science and Engineering A, 291(1-2), 46(2000)

[1]	周海涛, 侯湘武, 汪彦博, 肖旅, 袁勇, 孙京丽. 高Nb-TiAl合金的高温变形行为及其板材的性能[J]. 材料研究学报, 2022, 36(6): 471-480.
[2]	闫福照, 李静, 熊良银, 刘实. FeCr-ODS铁素体合金的氧化+粉锻工艺制备及其微观结构[J]. 材料研究学报, 2022, 36(6): 461-470.
[3]	王永鹏, 贾治豪, 刘梦竹. 二维CdO纳米棒的制备及其用于葡萄糖传感器的可行性[J]. 材料研究学报, 2021, 35(1): 53-58.
[4]	夏傲, 赵晨鹏, 曾啸雄, 韩曰鹏, 谈国强. B掺杂MnO₂的制备及其电化学性能[J]. 材料研究学报, 2021, 35(1): 36-44.
[5]	蔡国栋, 程西云, 王典. FDM型3D打印316L不锈钢试样和La对析出物形貌和分布的影响[J]. 材料研究学报, 2020, 34(8): 635-640.
[6]	谢礼兰, 杨冬升, 凌静. 高容量锂电池负极材料TiNb₂O₇的合成及其机理[J]. 材料研究学报, 2020, 34(5): 385-391.
[7]	马炜杰,杨西荣,罗雷,刘晓燕,郝凤凤. 复合形变超细晶纯钛的动态再结晶模型[J]. 材料研究学报, 2020, 34(3): 217-224.
[8]	姜巨福, 王迎, 肖冠菲, 邓腾, 刘英泽, 张颖. 变质细化和热处理对挤压铸造成形A356铝合金构件性能的影响[J]. 材料研究学报, 2020, 34(12): 881-891.
[9]	杨占鑫, 吴琼, 任奕桥, 屈凯凯, 张哲豪, 仲为礼, 范广宁, 齐国超. 宏量制备层状Ti₃C₂及其超级电容的性能[J]. 材料研究学报, 2020, 34(11): 861-867.
[10]	黄烁,贺玉伟,胥国华,段然,王磊,赵光普. V元素对铁镍基变形高温合金GH4061组织和性能的影响[J]. 材料研究学报, 2019, 33(6): 419-426.
[11]	秦斌,王群,王富孟,靳利娥,解小玲,曹青. 高电导率低热膨胀系数针状焦的制备[J]. 材料研究学报, 2019, 33(1): 53-58.
[12]	高绪涛, 赵爱民, 张元. 900 MPa级热轧TRIP钢的性能特征和析出行为[J]. 材料研究学报, 2018, 32(9): 662-668.
[13]	王强, 郝瑞亭, 赵其琛, 刘思佳. 多周期分层溅射硫化物靶制备铜锌锡硫薄膜太阳电池[J]. 材料研究学报, 2018, 32(6): 409-414.
[14]	刘正华, 王兢, 杜海英, 王惠生, 李晓干, 王小风. 基于联合仿真方法研究静电纺丝轨迹[J]. 材料研究学报, 2018, 32(2): 127-135.
[15]	李延伟, 谢志平, 刘参政, 姚金环, 姜吉琼, 杨建文. 二维褶皱状V₂O₅纳米材料的制备和储锂性能[J]. 材料研究学报, 2017, 31(5): 374-380.

Viewed

Full text

Abstract

Cited

Shared

Discussed