Please wait a minute...
材料研究学报  2010, Vol. 24 Issue (6): 603-609    
  研究论文 本期目录 | 过刊浏览 |
固化温度对有机硅基低发射率涂层耐腐蚀性能的影响
王雅君, 徐国跃, 陈慧敏, 李九芬
南京航空航天大学材料科学与技术学院 南京 211100
Influence of Curing Temperature on Anti-corrosion Properties of Silicone Based Composite Coatings with Low Infrared Emissivity
WANG Yajun, XU Guoyue, CHEN Huimin, LI Jiufen
College of Material Science and Technology, Nanjing University of Aeronautics & Astronautics, Nanjing 210016
引用本文:

王雅君 徐国跃 陈慧敏 李九芬. 固化温度对有机硅基低发射率涂层耐腐蚀性能的影响[J]. 材料研究学报, 2010, 24(6): 603-609.
, , , . Influence of Curing Temperature on Anti-corrosion Properties of Silicone Based Composite Coatings with Low Infrared Emissivity[J]. Chin J Mater Res, 2010, 24(6): 603-609.

全文: PDF(1188 KB)  
摘要: 将环氧改性有机硅(EA)与Al粉按质量比(3:2)形成EA/40%Al低红外发射率复合涂层, 研究了固化温度对EA/40%Al复合涂层耐腐蚀性能的影响及其机理。利用扫描电镜观察涂层的形貌, 并通过动电位极化技术及耐腐蚀实验对涂层的耐腐蚀性能进行了表征。结果表明, 在保证低发射率前提下, 固化温度为200℃时, 涂层的耐盐雾、耐人工加速老化和耐湿热腐蚀性能时间均能达到2000 h, 基本满足工程应用要求。固化温度为200℃时, 涂层的固化度最合适, 涂层交联最佳, 使得树脂基体与颜填料结合紧密, 涂层致密, 耐腐蚀性能最佳。
关键词 功能材料涂层 固化 环氧改性有机硅 红外发射率 耐腐蚀性能    
Abstract:The low infrared emissivity coatings were prepared by using epoxy modified silicone (EA) and Al powder (mass ratio 3:2) as organic adhesive and pigment respectively. The influence of the curing temperature on anti-corrosion properties of the coatings was researched. The chemical composition and the surface structure of EA/40% Al coating were characterized, and the corrosion behavior was investigated by the electrochemical method and anti-corrosion tests. The results show that the coatings curied at 200oCexhibit the excellent salt spray resistance, anti ultraviolet ageing performance and hot-wet resistance, which can reach the requirements of engineering applications.
Key wordsfunctional material    coatings    curing    epoxy modified silicone    infrared emissivity    anticorrosion properties
收稿日期: 2010-04-26     
ZTFLH: 

TQ324.2

 
基金资助:

国家自然科学基金90505008资助项目。

[1] 游毓聪,杜仕国,施冬梅.红外隐身涂料黏合剂的应用与研究[J].特种涂料与涂装,2006,16(7):50–54. You Yucong,Du Shiguo,Shi Dongmei.Application and Research of the Infrared Camouflage Coatings[J].Modern Paint & Finishing,2006,16(7):50–54. [2] Zueco J,Alhama F.Inverse estimation of temperature dependent emissivity of solid metals[J].Journal of Quantitative Spectroscopy and Radiative Transfer,2006,101(1):73–86. [3] 张卫东,冯小云,孟秀兰.国外隐身材料研究进展[J].宇航材料工艺,2000,30(3):1–4. Zhang Weidong,Feng Xiaoyun,Meng Xiulan.Status and Development of Foreign Study on New Stealthy Materials[J].Aerospace Materials & Technology,2000,30(3):1–4. [4] ARONSON J R.Modeling the infrared reflectance and emittance of paints and coating[R].AD–A110824, 1982. [5] 徐文兰,罗宁胜,张珉.非均匀涂层的热辐射[J].红外研究,1990,9(5):384-388. Xu Wenlan,Luo Ningsheng,Zhang Min.Thermal radiation of inhomogeneous coatings[J].Infrared Research,1990,9(5):384–388. [6] Xie Guohua,Zhang Zuoguang,Wu Ruibin.Matching performance among visible and near infrared coating, low infrared emitting coating and microwave absorbing coating[J].Journal of Wu Han University of Technology,Materials Science,2005,20(4):55–59. [7] Wang B,Sun X Q,Wang Z R.Study on stealth effect evaluation of infrared coating[J].Chinese Journal of Quantum Electronics,2004,21(4):538–541. [8] Wang T W,Cheng C L,Zhang Q T.Study on low infrared emissivity of coating in 8-14μm[J].Optical Technique,2005,31(4):598–600. [9] 琼斯 J.隐身技术[M].洪旗,魏海滨,译.北京:航空工业出版社,1991:52–72. [10] 余慧娟,徐国跃,邵春明.EPDM基涂层在8~14μm波段红外低发射率的研究[J].红外技术,2008,30(3):154–157. Yu Huijuan,Xu Guoyue,Shao Chunming.Study on Low Infrared Emissivity Coatings with EPDM adhesive in 8~14μm[J].Infrared Technology,2008,30(3):154–157. [11] 崔志明,杨亚江.环氧树脂固化度对粉末涂层性能的影响[J].塑料工业,2001,29(3):37–39. [12] 张宝华,叶俊丹,陈斌.固化温度对环氧树脂固化物性能的影响[J].塑料工业,2009,37(9):64–66. [13] 洪旭辉,李亚锋.氰酸酯改性环氧树脂耐热性研究[J].热固性树脂,2009,24(5):14–16. [14] 邵春明,徐国跃,余慧娟.改性三元乙丙橡胶用于红外隐身涂层的研究[J].宇航材料工艺,2008,(3):62–65. [15] 余慧娟,徐国跃,沈轩.8~14 μm 波段低发射率涂料的制备与优化研究[J].兵器材料科学与工程,2008,31(6):49–52. [16] K.H. Wu, C.M. Chao, T.F. Yeh.Thermal stability and corrosion resistance of polysiloxane coatings on 2024-T3 and 6061-T6 aluminum alloy[J] .Surface & Coatings Technology,201 (2007):5782–5788 [17] Fu-Sheng Chuang,Hung-Yi Tsi,Jing-Dong Chow. Thermal degradation of poly(siloxane-urethane) copolymers[J] . Polymer Degradation and Stability,93 (2008):1753–1761 [18] Jwlwna D J, Milutin N G. The thermogravimetric analysis of some polysiloxanes[J].Polymer Degradation and Stability, 1998, 61:87-93. [19] 杨丽霞,张三平,林安.有机涂层渗水率及金属涂层界面腐蚀的研究进展[J].材料保护,2001,34(10). [20] Huijuan Yu,Guoyue Xu,Xingmei Shen.Preparation of leafing Cu and its application in low infrared emissivity coatings[J] .Journal of Alloys and Compounds,484(2009):395–399. [21] 骆素珍,郑玉贵,李劲.环氧粉末涂层中介质传输的交流阻抗谱特征[J].腐蚀科学与防护技术,2001,13(4):199–20. [22] 杨光,黄鹏程.环氧共混树脂的光固化及其表面化学反应[J].北京航空航天大学学报,2008,34(6):618–621. [23] 徐永祥,严川伟,丁杰.紫外光对涂层的老化作用[J].中国腐蚀与防护学报,2004,24(3):168–173.
[1] 冯叶, 陈志勇, 姜肃猛, 宫骏, 单以银, 刘建荣, 王清江. 一种NiCrAlSiY涂层对Ti65钛合金板材循环氧化和室温力学性能的影响[J]. 材料研究学报, 2023, 37(7): 523-534.
[2] 王伟, 彭怡晴, 丁士杰, 常文娟, 高原, 王快社. Ti-6Al-4V合金表面石墨基粘结固体润滑涂层的高温摩擦学性能[J]. 材料研究学报, 2023, 37(6): 432-442.
[3] 李鹏宇, 刘子童, 亢淑梅, 陈姗姗. 等离子处理对医用镁合金表面聚合物防护涂层的影响[J]. 材料研究学报, 2023, 37(4): 271-280.
[4] 杜菲菲, 李超, 李显亮, 周尧尧, 阎庚旭, 李国建, 王强. 磁控溅射TiAlTaN/TaO/WS复合涂层及其钛合金的切削性能[J]. 材料研究学报, 2023, 37(4): 301-307.
[5] 田志刚, 李新梅, 秦忠, 王晓辉, 刘伟斌, 黄永. CoCrFeNiTi x 高熵合金涂层的显微组织和耐磨性能[J]. 材料研究学报, 2023, 37(3): 219-227.
[6] 程红杰, 刘黄娟, 姜婷, 王法军, 李文. 近红外反射超疏水黄色涂层的制备和性能[J]. 材料研究学报, 2022, 36(9): 687-698.
[7] 单位摇, 王永利, 李静, 熊良银, 杜晓明, 刘实. 锆合金表面Cr基涂层的耐高温氧化性能[J]. 材料研究学报, 2022, 36(9): 699-705.
[8] 陈杰, 李红英, 周文浩, 张青学, 汤伟, 刘丹. 热输入对Q1100钢焊接接头低温韧性及耐蚀性能的影响[J]. 材料研究学报, 2022, 36(8): 617-627.
[9] 李玉峰, 张念飞, 刘丽爽, 赵甜甜, 高文博, 高晓辉. 含磷石墨烯的制备及复合涂层的耐蚀性能[J]. 材料研究学报, 2022, 36(12): 933-944.
[10] 曾志鹏, 宋小艳, 孙勇, 宋双林, 陆伟, 贺正龙. 聚氨酯/水玻璃注浆材料固化过程中的微观结构和力学性能[J]. 材料研究学报, 2022, 36(11): 855-861.
[11] 李建中, 朱博轩, 王振宇, 赵静, 范连慧, 杨柯. 输尿管支架表面化学接枝镀铜涂层及其性能[J]. 材料研究学报, 2022, 36(10): 721-729.
[12] 李瑞一, 谢敏, 张永和, 裴训, 刘洋, 宋希文. Er2O3掺杂Gd2(Zr0.8Ti0.2)2O7陶瓷的物理性能[J]. 材料研究学报, 2022, 36(1): 49-54.
[13] 李蕊, 王浩, 张天刚, 牛伟. Ti811合金表面激光熔覆Ti2Ni+TiC+Al2O3+CrxSy复合涂层的组织和性能[J]. 材料研究学报, 2022, 36(1): 62-72.
[14] 陈艺文, 王成, 娄霞, 李定骏, 周科, 陈明辉, 王群昌, 朱圣龙, 王福会. 无机复合涂层对CB2铁素体耐热钢在650℃水蒸气中的防护[J]. 材料研究学报, 2021, 35(9): 675-681.
[15] 刘福广, 陈胜军, 潘红根, 董鹏, 马英民, 黄杰, 杨二娟, 米紫昊, 王艳松, 雒晓涛. 热喷涂复合结构MCrAlY/8YSZ热障涂层的抗剥落能力[J]. 材料研究学报, 2021, 35(4): 313-320.