|
|
|
| 用直流溅射工艺制备的氧化铌薄膜的性能 |
| 黄银松;章俞之;胡行方 |
| 中国科学院上海硅酸盐研究所 |
|
引用本文:
黄银松; 章俞之; 胡行方 . 用直流溅射工艺制备的氧化铌薄膜的性能[J]. 材料研究学报, 2002, 16(5): 517-522.
1 B.Q.Han,S.Yue,Processing of ultrafine ferrite steels, Journal of Materials Processing Technology,136, 100(2003)
2 P.J.Hurley,P.D.Hodgson,Formation of ultra-fine fer- rite in hot rolled strip:potential mechanisms for grain refinement,Materials Science and Engineering,302A, 206(2001)
3 Z.Q.Sun,W.Y.Yang,J.J.Qi,A.M.Hu,Deformation en- hanced transformation and dynamic recrystallization of ferrite in a low carbon steel during multipass hot deforma- tion,Materials Science and Engineering,334A,201(2002)
4 CUI Wenfang,LIU Chunming,WU Jianghua,Formation of ultrafine ferrite in low-carbon steels,Chinese Journal of Materials Research,20(3),240(2006) (崔文芳，刘春明，吴江华，低碳钢超细晶铁索体的形成，材料研究学报，20(3)，240(2006))
5 WANG Guodong,LIU Xianghua,LI Weijuan,DU Linxiu, ZHANG Hongmei,Industrial rolling trials of super-SS400 steel,Iron and Steel,36(5),39(2001) (王国栋，刘相华，李维娟，杜林秀，张红梅，超级Super-SS400钢的工业轧制实验，钢铁，36(5)，39(2001))
6 YANG Ping,CHANG Shouhai,CUI Fenge,SUN Zuqing, Orientntionai characteristics of ferrite during strain en- hanced transformation in a Q235 plain carbon steel,Chi- nese Journal of Materials Research,16(3),251(2002) (杨平，常守海，崔凤娥，孙祖庆，Q235碳素钢应变强化相变中铁素体的取向特征，材料研究学报，16(3)，251(2002))
7 H.Ding,L.Li,C.Z.Yang,D.Sun,L.X.Du,Microstructures of an ultrafine grained SS400 steel in an industrial scale, J.Mater.Sci.Technol.,22(2),145(2006)
8 FANG Hongsheng,ZHENG Yankang,HUANG Jinfeng, BO Xiangzheng,Prospect of bainitic steels,Metal Heat Treatment,(7),11(1998) (方鸿生，郑燕康，黄进峰，薄祥正，我国贝氏体钢的前景，金属热处理，(7)，11(1998))
9 P.G.Xu,B.Z.Bai,H.S.Fang,Z.J.Wang,J.P.Wang, Y.K.Pan,Development of grain boundary allotriomorphic ferrite/granular bainite duplex steel,Journal of University of Science and Technology Beijing,10(2),39(2003)
10 K.Hussain,R.R.De Los Rios,Microstructurai effect on tensile and fatigue behaviour of C-Mn steel,Journal of Materials Science,32,3565(1997)
11 XU Pingguang,FANG Hongsheng,BAI Bingzhe,YANG Zhigang,Toughness of Grain Boundary Allotriomorphic Ferrite/Granular Bainite Duplex Microstructure,Acta Metallurgica Sinica,38(3),255(2002) (徐平光，方鸿声，白秉哲，杨志刚，仿晶界型铁素体／粒状贝氏体复相组织的韧性，金属学报，38(3)，255(2002))
12 Ma Mingtu,Dual-Phase Steel-Metallurgy of Physics and Mechanics(Beijing,The Press of Metallurgical Industry, 1988)p.137 (马鸣图，双相钢-物理和力学冶金(北京，冶金工业出版社，1988)p．137)
13 DONG Han,SUN Xinjun,LIU Qingyou,WENG Yuqing, Deformation induced ferrite transformation phenomena and theory,Iron and Steel,38(10),56(2003) (董瀚，孙新军，刘清友，翁宇庆，变形诱导铁素体相变-现象与理论，钢铁，38(10)，56(2003))
14 P.G.Xu,B.Z.Bai,F.X.Yin,H.S.Fang,K.Nagai,Mi- crostructure control and wear resistance of grain boundary allotriomorphic ferrite/granular bainite duplex steel,Ma- terials Science and Engineering,385A,65(2004) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
