Please wait a minute...
材料研究学报  2002, Vol. 16 Issue (5): 511-516    
  论文 本期目录 | 过刊浏览 |
纳米TiO2对不饱和聚酯树脂(TiO2/UPR)的改性
徐颖1;卢凤纪2;李贺军1
1 西北工业大学;2 西安交通大学
引用本文:

徐颖; 卢凤纪; 李贺军 . 纳米TiO2对不饱和聚酯树脂(TiO2/UPR)的改性[J]. 材料研究学报, 2002, 16(5): 511-516.

全文: PDF(546 KB)  
摘要: 将纳米TiO2粉加入到不饱和聚酯中进行同时增韧增强改性,在用简支梁冲击强度表征纳米TiO2/UPR的韧性时,发现树脂有明显的脆韧转变现象,在脆—韧转变点TiO2含量为6%(质量分数)。纳米TiO2/UPR弯曲强度和冲击强度分别比UPR提高了55%和46%。在扫描电子显微镜下观测纳米TiO2/UPR的冲击断口形貌时发现,在脆—韧转变点附近纳米TiO2/UPR的微观形态发生了从脆性断裂到韧性断裂的形貌特征。
关键词 纳米TiO2不饱和聚酯树脂增韧增强    
Key words
收稿日期: 1900-01-01     
1 B.Cina,U.S.Patent 3856584,December 24,1974
2 W.Wallace,J.C.Beddoes,M.C.deMalherbe,A new ap- proach to the problem of stress corrosion cracking in 7075- T6 aluminum.Canadian Aeronautics and Space Journal, 27,222(1981)
3 M.U.Islam,W.Wallace,Retrogression and reaging re- sponse of 7475 aluminium alloy.Metals Technology, 10(10),386(1983)
4 C.D.Nguyen,K.Rajan,W.Wallace,A TEM study of mi- crostructural changes during retrogression and reaging in 7075 aluminum alloy.Metallurgical Transactions A(Phys- ical Metallurgy and Materials Science),14(9),1843(1983)
5 N.Danh,K.Rajan,W.Wallace,Discussion of effect of ret- rogression and reaging treatments on the microstructure of Al-7075-T651.Metallurgical Transactions A(Physical Metallurgy and Materials Science),16(11),2068(1985)
6 M.U.Islam,W.Wallace,Stress corrosion crack growth be- haviour of 7475 T6 retrogressed and reaged aluminum al- loy.Metals Technology,11(8),320(1984)
7 R.T.Holt,V.R.Parameswaran,W.Wallace,RRA treat- ment of 7075-T6 aluminum components,Canadian Aero- nautics and Space Journal,42(2),83(1996)
8 J.C.Lin,H.L.Liao,W.D.Jehng,C.H.Chang,S.L.Lee,Ef- fect of heat treatments on the tensile strength and SCC- resistance of AA7050 in an alkaline saline solution,Corro- sion Science,48,3139(2006)
9 K.Rajan,W.Wallace,J.C.Beddoes,Microstructural Study of a high strength-stress-corrosion resistant 7075 alu- minum alloy,J.Mat.Sci.,17,2817(1982)
10 Wu Yilei,Li Yongwei,Qiang Jun,Li Chunyu,Develop- ment and application of super-high strength aluminum al- loy,Journal of Aeronautical Materials,2(1),49(1994) (吴一雷,李永伟,强俊,李春玉,超高强度铝合金的发展和应用.航空材料学报,2(1),49(1994))
11 D.A.Luckasak,R.M.Hart,Aluminum alloy development efforts for compression dominated structure of aircraft. Light Metal Age,10,11(1991)
12 S.H.Paul,Solute effects on electromigration,Phys.Rev. B,8,4534(1973)
13 R.Landauer,J.W.F.Woo,Driving force in electromigra- tion,Phys.Rev.B,10,1266(1974)
14 LIU Zhiyi,XU Xiaochang,CUI Jianzhong,Effect of elec- tric current oulse on grain growth in superplastic defor- mation of 2091 Al-Li alloy.Transactions of Nonferrous Metals Society of China,13(4),743(2003)
15 LIU Zhiyi,LIU Bing,DENG Xiaotie,LEI Yi,CUI Jianzhong,BAI Guangrtm,Effect of current pulse on mechanism of superplastic deformation of 2091 Al-Li al- loy,Acta.Metall.Sinica,36(9),944(2000) (刘志义,刘冰,邓小铁,雷毅,崔建忠,白光润,脉冲电流对2091 Al-Li合金超塑变形机理的影响,金属学报,36(9),944(2000))
16 LIU Zhiyi,DENG Xiaotie,WANG Yinzhen,Effects of electric current pulse on the dynamics of dynamic recrys- tallization in 2091 Al-Li alloy,Chinese Journal of Materi- als Research,15(3),358(2001) (刘志义,邓小铁,王引真,脉冲电流对2091铝锂合金动态再结晶动力学的影响,材料研究学报,15(3),358(2001)
17 J.R.Rickens,L.Christodoulou,The stress-corrosion crack- ing behavior of high strength aluminum powder metallurge alloys,Metall.Trans.,18A(1),135(1987)
18 A.ThaKur,R.Raman,S.N.Malhotra,Hydrogen embrittle- ment studies of aged and retrogressed-reaged Al-Zn-Mg alloys,Materials Chemistry and Physics,101,441(2007)
[1] 李瑞一, 谢敏, 张永和, 裴训, 刘洋, 宋希文. Er2O3掺杂Gd2(Zr0.8Ti0.2)2O7陶瓷的物理性能[J]. 材料研究学报, 2022, 36(1): 49-54.
[2] 胡满银, 欧阳德来, 崔霞, 杜海明, 徐勇. 微波烧结原位合成TiC增强钛复合材料的性能[J]. 材料研究学报, 2021, 35(4): 277-283.
[3] 苗月珍, 王昕彤, 谢梦舒, 戚克振, 初增泽, 孙秋菊. 尼龙66及其复合材料的热分解动力学[J]. 材料研究学报, 2020, 34(8): 599-604.
[4] 周海涛, 汪彦博, 肖旅, 孙京丽, 徐玉棱, 陈舸. 含碳增强体镁基复合材料的制备和界面调控的研究现状及发展趋势[J]. 材料研究学报, 2020, 34(11): 801-810.
[5] 张栋,柯培玲,汪爱英,王香勇,智理. PECVD工艺制备功能装饰氧化硅薄膜的性能[J]. 材料研究学报, 2019, 33(6): 467-474.
[6] 李明专,胡孝迎,何敏,于杰,鲁圣军. 环氧树脂改性聚乳酸/低熔点尼龙6复合材料的结构和性能[J]. 材料研究学报, 2019, 33(4): 261-270.
[7] 王延相, 苏顺生, 范汶鑫, 秦建杰, 瞿策, 王成国. 加载金属催化剂在碳纤维表面生长多尺度碳纳米管增强体[J]. 材料研究学报, 2018, 32(7): 495-501.
[8] 马欢, 张国利, 朱有欣, 王伟伟, 王志鹏. 复合材料头盔壳体用超薄层合板冲击后的压缩性能[J]. 材料研究学报, 2018, 32(5): 348-356.
[9] 卓倩, 杨文卿, 曹长林, 陈荣国, 钱庆荣, 陈庆华. 配位交联丁腈橡胶/硫酸高铈复合材料的增韧改性[J]. 材料研究学报, 2018, 32(2): 136-141.
[10] 向兆兵,聂俊辉,魏少华,左涛,马自力,樊建中. 增强颗粒与基体适配性对颗粒增强铝基复合材料强化机理的影响[J]. 材料研究学报, 2015, 29(10): 744-750.
[11] 李祖来,蒋业华,周荣,王志胜,山泉. 碳化钨颗粒增强钢基表层复合材料的热物理特性*[J]. 材料研究学报, 2014, 28(8): 621-626.
[12] 孙涛 樊君 胡晓云 刘恩周 何奇 侯文倩 吴丰. N、Fe共掺杂纳米TiO2的制备和性能[J]. 材料研究学报, 2012, 26(2): 155-161.
[13] 叶诚 杜晓东 杨皓宇. 钢表面颗粒增强熔覆层的组织和性能[J]. 材料研究学报, 2012, 26(1): 55-60.
[14] 王征科 胡巧玲 李友良 戴卓君. 微波辐射增强改性三维壳聚糖棒材[J]. 材料研究学报, 2011, 25(2): 113-117.
[15] 王庆良 孙彦敏 张 磊. PECVD法制备类金刚石薄膜的摩擦学性能[J]. 材料研究学报, 2011, 25(1): 73-78.