Please wait a minute...
材料研究学报  2002, Vol. 16 Issue (3): 225-229    
  论文 本期目录 | 过刊浏览 |
纳米Al/Al2O3复合材料中Al2O3膜的碎化对性能的影响
杨志卿; 贺连龙; 胡魁义; 陈 吉; 范学书; 丛洪涛; 叶恒强
中国科学院金属研究所
引用本文:

杨志卿; 贺连龙; 胡魁义; 陈吉; 范学书; 丛洪涛; 叶恒强 . 纳米Al/Al2O3复合材料中Al2O3膜的碎化对性能的影响[J]. 材料研究学报, 2002, 16(3): 225-229.

全文: PDF(857 KB)  
摘要: 观察了在不同温度下退火的Al/Al2O3复合材料的微观组织,结果表明,当退火温度达到570℃时包裹着Al核的非晶Al2O3壳开始破碎. 研究了非晶Al2O3膜的破碎机理并在此基础上讨论了材料的微观结构与力学性能和内耗的关系,发现氧化膜的状态对材料的力学性能和内耗特征具有决定性的影响.
关键词 Al2O3膜Al/Al2O3复合材料微观组织    
Key words
收稿日期: 1900-01-01     
1 H.J.Rack,J.I.Qazi,Titanium alloys for biomedical ap- plications,Materials Science and Engineering C,26(8), 1269(2006)
2 D.Kuroda,M.Niinomi,M.Morinaga,Y.Kato,T.Yashiro, Design and mechanical properties of newβtype titanium alloys for implant materials,Materials Science and Engi- neering A,243(1-2),244(1998)
3 Y.L.Hao,M.Niinomi,D.Kuroda,K.Fukunaga,Y.L.Zhou, A.Suzuki,Young's modulus and mechanical Properities of Ti-29Nb-13Ta-4.6Zr in relation toα″marteusite,Metal- lurgical and Materials Transactions A,33A,477(2002)
4 Y.L.Hao,S.J.Li,S.Y.Sun,C.Y.Zheng,Q.M.Hu,R.Yang, Super-elastic titanium alloy with unstable plastic defor- mation,Applied Physics Letters,87,091906(2005)
5 Y.L.Hao,S.J.Li,S.Y.Sun,C.Y.Zheng,R.Yang,Elastic de- formation behaviour of Ti-24Nb-4Zr-7.9Sn for biomedical applications,Acta Biomaterialia,3(2),277(2007)
6 Y.L.Hao,S.J.Li,S.Y.Sun,R.Yang,Effect of Zr and Sn on Young's modulus and superelasticity of Ti-Nb-based alloys,Materials Science and Engineering A,441(1-2), 112(2006)
7 O.M.Ivaslshin,P.E.Markovsky,S.L.Semiatin,C.H.Ward, Aging response of coarse-and fine-gainedβtitanium alloys,Materials Science and Engineering A,405(1-2), 296(2005)
8 Y.G.Li,M.H.Loretto,D.Rugg,W.Voice,Effect of heat treatment and exposure on microstructure and mechanical properties of Ti-25V-15Cr-2Al-0.2C(wt.%),Acta Materi- alia,49(15),3011(2001)
9 J.I.Qazi,B.Marquardt,L.F.Allard,H.J.Rack,Phase transformations in Ti-35Nb-7Zr-5Ta-(0.06-0.68)O alloys, Materials Science and Engineering C,25(3),389(2005)
10 M.Ikeda,S.Y.Komatsu,I.Sowa,M.Niinomi,Aging behav- ior of the Ti-20Nb-13Ta-4.6Zr new beta alloy for med- ical implants,Metallurgical and Materials Transactions A, 33A,487(2002)
11 T.W.Duerig,G.T.Terlinde,J.C.Williams,Phase transfor- mations and tensile properties of Ti-10V-2Fe-3Al,Metal- lurgical Transactions,11A,1987(1980)
12 Y.L.Hao,Niinomi M,Kuroda D,Fukunaga K,Zhou YL, Yang R,Suzuki A,Aging response of the Young's modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr for bio- medical applications,Metallurgical and Materials Trans- actions A,34A(4),1007(2003)
13 Z.Fan,On the Young's moduli of Ti-6Al-4V alloys,Scripta Metallurigica et Materialia,29,1427(1993)
14 H.Ledbetter,S.Datta,Cast-Iron elastic constants:Effect of graphite aspect patio,Zeitschrift Fur Metallkunde,83, 195(1992)
15 Z.Fan,P.Tsakiropoulos,A.P.Miodownik,Yield strength of two ductile phase alloys,Materials Science and Technol- ogy,9,863(1993)
16 Z.Fan,A.P.Miodownik,P.Tsakiropoulos,Microstructural characterization of two phases materials,Materials Science and Technology,9,1094(1993)
17 R.Boccaccini,Young's modulus of cast-iron as a function of volume content,shape and orientation of graphite in- clusions,Zeitschrift Fur Metallkunde,88,23(1997)
18 L.J.Broutman,R.H.Krock,Modern Composite Materials (Addison-Wesley,Reading,MA)1963
19 M.Long,H.J.Rack,Titanium alloys in total joint replacement-materials science perspective,Biomaterials, 19,1621(1998)w
[1] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[2] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[3] 雷志国, 文胜平, 黄晖, 张二庆, 熊湘沅, 聂祚仁. 冷轧变形和添加SiAl-2Mg-0.8Cu(-Si)合金的组织和力学性能的影响[J]. 材料研究学报, 2023, 37(6): 463-471.
[4] 夏博, 王斌, 张鹏, 李小武, 张哲峰. 回火温度对高强弹簧钢微观组织和冲击性能的影响[J]. 材料研究学报, 2023, 37(5): 341-352.
[5] 董宇昂, 阳华杰, 贲丹丹, 马云瑞, 周相海, 王斌, 张鹏, 张哲峰. 液氮电脉冲处理超细晶316L不锈钢的低温拉伸性能[J]. 材料研究学报, 2023, 37(3): 168-174.
[6] 刘东洋, 童广泽, 高文理, 王卫凯. 2060铝锂合金厚板的各向异性[J]. 材料研究学报, 2023, 37(3): 235-240.
[7] 周聪, 昝宇宁, 王东, 王全兆, 肖伯律, 马宗义. (Al11La3+Al2O3)/Al复合材料的高温性能及其强化机制[J]. 材料研究学报, 2023, 37(2): 81-88.
[8] 聂敬敬, 龚政轩, 孙京丽, 杨斯达, 夏先朝, 徐爱杰. 2195-2219异种铝合金焊接接头的微观组织和性能[J]. 材料研究学报, 2023, 37(2): 152-160.
[9] 肖寒, 周瑀杭, 陈磊, 张雄超, 崔鋆昕, 熊迟. 等温处理时间对触变挤压锡青铜轴套的组织和性能的影响[J]. 材料研究学报, 2022, 36(9): 641-648.
[10] 王国田, 龙泽堃, 吴彪, 王强, 丁宏升. 脉冲电流对冷坩埚定向凝固TiAl基合金微观组织和性能的影响[J]. 材料研究学报, 2022, 36(9): 706-714.
[11] 闫福照, 李静, 熊良银, 刘实. FeCr-ODS铁素体合金的氧化+粉锻工艺制备及其微观结构[J]. 材料研究学报, 2022, 36(6): 461-470.
[12] 范晋平, 蒋一锋, 裴镖, 康文旭. YMg-14Al-5Si合金性能的影响[J]. 材料研究学报, 2022, 36(3): 213-219.
[13] 谢锐, 吕铮, 徐长伟, 王晴, 刘春明. 含钛氧化物弥散强化钢的微观组织和力学性能[J]. 材料研究学报, 2022, 36(2): 99-106.
[14] 王沛锦, 艾桃桃, 廖仲尼, 赵堃, 李文虎, 寇领江, 赵中国, 邹祥宇. 热压烧结(FeNiCoCr)100-x Al x (x=05)高熵合金的微观组织及力学性能[J]. 材料研究学报, 2022, 36(11): 871-880.
[15] 刘超, 王鑫, 门月, 张浩宇, 张思倩, 周舸, 陈立佳, 刘海建. Ti-6Al-4V合金热压缩过程中的动态再结晶[J]. 材料研究学报, 2021, 35(8): 583-590.