Please wait a minute...
Chin J Mater Res  2009, Vol. 23 Issue (4): 421-425    DOI:
论文 Current Issue | Archive | Adv Search |
Microstructure and corrosion resistance of composite coating on magnesium alloy by microarc oxidation and electrophoresis
YANG Wei;  JIANG Bailing;  SHI Huiying;  XIAN Linyun
School of Material Science and Engineering; Xi'an University of Technology; Xi'an 710048
Cite this article: 

YANG Wei JIANG Bailing SHI Huiying XIAN Linyun. Microstructure and corrosion resistance of composite coating on magnesium alloy by microarc oxidation and electrophoresis. Chin J Mater Res, 2009, 23(4): 421-425.

Download:  PDF(975KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Microarc oxidation (MAO) coatings on magnesium alloy were prepared in silicate electrolyte under constant voltage mode. Cross-section morphologies, binding force and corrosion resistance of the coatings treated by micro arc oxidation and electrophoresis or direct electrophoresis were studied, respectively. The results show that electrophoresis coating can be prepared on the surface of MAO coating, and this technique is simpler than the traditional electrophoresis. The forces of physical binding and chemical bonding of the composite coatings were formed, and the grade of binding force is NO.1. The corrosion weight and surface morphology of the composite coatings are not changed under the neutral salt spray test for 800 h. The electrochemical stability of the microarc oxidation and electrophoresis coating is better, and corrosion current is decreased by 5 or 2 grades compared by the ceramic coating or direct electrophoresis coating.

Key words:  metal materials      microarc oxidation and electrophoresis      composite coating      microstructure      corrosion resistance     
Received:  12 December 2008     
ZTFLH: 

TG174

 
  TB304

 
Fund: 

Support by National Key Technologies R\&D Program No.2006BAE04B05-1.

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2009/V23/I4/421

1 R.F.Zhang, D.Y.Shan, R.S.Chen, E.H.Han, Effects of electric parameters on properties of anodic coatings formed on magnesium alloys, Materials Chemistry and Physics, 107, 356(2008)
2 LUO Haihe, CAI Qizhou, WEI Bokang, YU Bo, HE Jian, LI Dingjun, Effects of additive concentration on microstructure and corrosion resistance of ceramic coatings formed by micro-arc oxidation on AZ91D Mg alloy, The Chinese Journal of Nonferrous Metals, 18(6), 1082(2008)
(骆海贺, 蔡启舟, 魏伯康, 余博, 何剑, 李定骏, 添加剂浓度对微弧氧化陶瓷层结构及耐蚀性的影响, 中国有色金属学报, 18(6), 1082(2008))
3 JIANG Bailing, ZHANG Shufen, WU Guojian, Study of corrosion resistance on micro arc oxidation ceramic coatings on magnesium alloy, J Chin. Soc. Corros., 22(5), 301(2002)
(蒋百灵, 张淑芬, 吴国建, 镁合金微弧氧化陶瓷层耐蚀性的研究, 中国腐蚀与防护学报,  22(5), 301(2002))
4 S.Verdier, M.Boinet, S.Maximovitch, F.Dalard, Formation, structure and composition of anodic films on AM60 magnesium alloy obtained by DC plasma anodizing, Corrosion Science, 47, 1430(2005)
5 S.V.Gnedenkova, O.A.Khrisanfova, A.G.Zavidnaya, S.L.Sinebrukhov, P.S.Gordienko, S.Iwatsubo, A.Matsui, Composition and adhesion of protective coatings on aluminum, Surface and Coatings Technology, 145, 146(2001)
6 LUO Xiaoping, XIA Lanting, ZANG Dongmian, Present state of Chemical Conversion Trea tment on Face of Magnesium Alloys, Reseearch studies on foundry equipment, 2, 44(2007)
(罗小萍, 夏兰廷, 臧东勉, 镁合金表面化学转化处理研究现状, 铸造设备研究,  2, 44(2007))
7 G.P.Writz, S.D.Bown, W.M.Kriven, Ceramic coatings by anodic spark deposition, Materials and Manufacturing Processes, 6(1), 87(1991)
8 XUE Wenbin, SHI Xiuling, HUA Ming, LI Yongliang, Preparation of anti-corrosion films by microarc oxidation on an Al–Si alloy, Appl. Surf. Sci., 253, 6118(2007)
9 C.E.Barchiche, E.Rocca, J.Hazan, Corrosion behaviour of Sn-containing oxide layer on AZ91D alloy formed by plasma electrolytic oxidation, Surf. Coat. Technol., 202, 4145(2008)
10 H.Y.Zheng, Y.K.Wang, B.S.Li, G.R.Han, The effects of Na2WO4 concentration on the properties of microarc oxidation coatings on aluminum alloy, Materials Letters, 59, 139(2005)
11 G.Sundararajan, L.Rama Krishna, Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology, Surf. Coat. Technol., 167, 269(2003)
12 XUE Wenbing, DENG Zhiwei, CHEN Ruyi, ZHANG Tonghe, MA Hui, Microstructure and properties of ceramic coatings produced on 2024 aluminum alloy by microarc oxidation, Journal of Materials Science, 36, 2615(2001)
13 LIANG Jun, HU Litian, HAO Jingcheng, Improvement of corrosion properties of microarc oxidation coating on magnesium alloy by optimizing current density parameters, Appl. Surf. Sci., 253, 6939(2007)

[1] MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667.
[3] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696.
[4] OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705.
[5] PAN Xinyuan, JIANG Jin, REN Yunfei, LIU Li, LI Jinghui, ZHANG Mingya. Microstructure and Property of Ti / Steel Composite Pipe Prepared by Hot Extrusion[J]. 材料研究学报, 2023, 37(9): 713-720.
[6] XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613.
[7] SHI Chang, DU Yuhang, LAI Liming, XIAO Siming, GUO Ning, GUO Shengfeng. Mechanical Properties and Oxidation Resistance of a Refractory Medium-entropy Alloy CrTaTi[J]. 材料研究学报, 2023, 37(6): 443-452.
[8] LEI Zhiguo, WEN Shengping, HUANG Hui, ZHANG Erqing, XIONG Xiangyuan, NIE Zuoren. Influence of Rolling Deformation on Microstructure and Mechanical Properties of Al-2Mg-0.8Cu(-Si) Alloy[J]. 材料研究学报, 2023, 37(6): 463-471.
[9] LI Qiao, NIU Ben, ZHANG Ruiqian, LIU Huiqun, LIN Guoqiang, WANG Qing. Effect of Ta/Zr on High-temperature Microstructural Stability of Warm-rolled Sheets of Fe-Cr-Al-Mo-Nb Alloy[J]. 材料研究学报, 2023, 37(6): 423-431.
[10] XIA Bo, WANG Bin, ZHANG Peng, LI Xiaowu, ZHANG Zhefeng. Effect of Tempering Temperature on Microstructure and Impact Properties of Two High-strength Leaf Spring Steels[J]. 材料研究学报, 2023, 37(5): 341-352.
[11] ZHANG Shuaijie, WU Qian, CHEN Zhitang, ZHENG Binsong, ZHANG Lei, XU Pian. Effect of Mn on Microstructure and Properties of Mg-Y-Cu Alloy[J]. 材料研究学报, 2023, 37(5): 362-370.
[12] LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[13] LIAO Hongyu, JIA Yongxin, SU Ruiming, LI Guanglong, QU Yingdong, LI Rongde. Effect of Retrogression Times on Microstructure and Corrosion Resistance of 2024 Aluminum Alloy[J]. 材料研究学报, 2023, 37(4): 264-270.
[14] ZHANG Ruixue, MA Yingjie, JIA Yandi, HUANG Sensen, LEI Jiafeng, QIU Jianke, WANG Ping, YANG Rui. Microstructure Evolution and Element Partitioning Behavior during Heat-treatment in Metastable β Titanium Alloy[J]. 材料研究学报, 2023, 37(3): 161-167.
[15] LIN Shifeng, XU Dongan, ZHUANG Yanxin, ZHANG Haifeng, ZHU Zhengwang. Preparation and Mechanical Properties of TiZr-based Bulk Metallic Glass/TC21 Titanium Alloy Dual-layered Composites[J]. 材料研究学报, 2023, 37(3): 193-202.
No Suggested Reading articles found!