|
Cite this article:
NING Ai-Lin. . Chin J Mater Res, 2008, 22(4): 357-362.
|
|
|
|
|
Received: 14 November 2006
|
|
|
1 LI Hongying,GENG Jinfeng,ZHANG Jianfei,DONG Xianjuan,Influence of ageing on fracture toughness and stress corrosion cracking resistance of B95лчforging, Journal of Material Engineering,4,28(2006) (李红英，耿进锋，张建飞，董显娟，时效制度对B95лч锻件断裂韧性和抗应力腐蚀性能的影响，材料工程，4，28(2006))
2 LI Hai,WANG Zhixiu,ZHENG Ziqiao,Influence of pre- deformation and aging on properties and microstructures of 7055 Al alloy,Rare Metal Materials and Engigeering, 35(8),1276(2006) (李海，王芝秀，郑子樵，预变形及时效处理对7055铝合金组织和性能的影响，稀有金属材料与工程，35(8)，1276(2006))
3 ZHANG Kun,LIU Zhiyi,ZHENG Qingchun,XU Xi- aochang,YE Chengwu,Effects of different retrogres- sion and reaging heat treatment on high zinc super high strength aluminum alloy,J.Cent.South Univ.(Science and Technology),36(2),188(2005) (张坤，刘志义，郑青春，许晓嫦，叶呈武，高Zn超高强铝合金的回归再时效处理，中南大学学报(自然科学版)，36(2)，188(2005))
4 B.Cina,Reducing the Susceptibility of Alloys,Particu- larly Aluminium Alloys,to Stress Corrosion Cracking, U.S.Patent 3856584,December 24,1974
5 T.Ashish,R.Raman,S.N.Malhotra,Hydrogen embrittle- ment studies of aged and retrogressed-reaged Al-Zn-Mg alloys,Materials Chemistry and Physics,101,441(2007)
6 M.U.Islam,W.Wallace,Retrogression and reaging re- sponse of 7475 aluminium alloy,Metals Technology, 10(10),386(1983)
7 LI Zhihui,XIONG Baiqing,ZHANG Yongan,ZHU Bao- hong,WANG Feng,LIU Hongwei,Ageing behavior of an Al-Zn-Mg-Cu alloy pre-stretched thick plate,Journal of University of Science and Technology Beijing,14(3), 246(2007)
8 N.Danh,K.Rajan,W.Wallace,Discussion of effect of ret- rogression and reaging treatments on the microstructure of Al-7075-T651,Metallurgical Transactions A(Physical Metallurgy and Materials Science),16(11),2068(1985)
9 M.U.Islam,W.Wallace,Stress corrosion crack growth be- haviour of 7475 T6 retrogressed and reaged aluminum al- loy,Metals Technology,11(8),320(1984)
10 R.T.Holt,V.R.Parameswaran,W.Wallace,RRA treat- ment of 7075-T6 aluminum components,Canadian Aero- nautics and Space Journal,42(2),83(1996)
11 A.Gazda,M.Warmuzek,W.Wierzchowski,DTA investiga- tion of the retrogression and re-ageing in some AlZnMgCu alloys,Thermochimica Acta,303,197(1997)
12 NING Ailin,LIU Zhiyi,FENG Chun,ZENG Sumin, Analysis on the behavior of exceeding peak aging strength of aluminum alloy at condition of retrogression and reag- ing,Acta Metallurgica Sinica,42(12),1253(2006) (宁爱林，刘志义，冯春，曾苏民，铝合金回归再时效状态的超峰时效强度行为分析，金属学报，42(12)，1253(2006))
13 M.Puiggali,A.Zielinski,Effect of microstrucure on stress corrosion cracking of an Al-Zn-Mg-Cu alloy,Corrosion Science,40(4/5),805(1998)
14 M.K.Tseng,J.Liu,Z.H.Jin,Role of Mg segregation to grain boundary in hydrogen-induced crack process of 7050 aluminum alloy,Proc.of ICAAⅡ,Beijing,662(1990)
15 L.Wang,Stress corrosion cracking of aluminium alloy, Proc.of ICAAⅡ,Beijing,687(1990)
16 T.C.Tsai,T.H.Chuang,Role of grain size in the stress cor- rosion cracking of 7475 aluminum alloy,Mater.Sci.Eng. A,225(2),135(1997)
17 L.Christodoulou,H.M.Flowet,Hydrogen embritlement and trapping in A1-6%Zn-3%Mg.Acta Metall.,28, 481(1980)
18 M.Talianker,B.Cina,Retrogression and reaging and the role of dislocations in the stress corrosion of 7000-type aluminum alloys,Metallurgical Transactions A(Physical Metallurgy and Materials Science),20(10),2087(1989)
19 NING Ailin,LIU Zhiyi,FENG Chun,ZENG Sumin, Effect of heat-treatment on the mechanicalproperties of 7A04 alloy with large cross section,Chinese Journal of Materials Research,21(5),511(2007) 宁爱林，刘志义，冯春，曾苏民，热处理对大截面7A04铝合金棒材力学性能的影响，材料研究学报，21(5)，511(2007) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
