Chin J Mater Res  1992, Vol. 6 Issue (6): 528-532    DOI:

Current Issue | Archive | Adv Search |

EFFECT OF Al_2O_3 ON THE FORMATION OF Ba_2Ti_9O_(20)

YU Jiaqing(Institute of Corrosion and Protection of Metals;Academia Sinica)WANG Jiasheng;ZHAO Hangwei;YU Baohai;WANG Shengyu(Institute of Metal Research;Academia Sinica)

YU Jiaqing(Institute of Corrosion and Protection of Metals;Academia Sinica)WANG Jiasheng;ZHAO Hangwei;YU Baohai;WANG Shengyu(Institute of Metal Research;Academia Sinica). EFFECT OF Al_2O_3 ON THE FORMATION OF Ba_2Ti_9O_(20). Chin J Mater Res, 1992, 6(6): 528-532.

Abstract References Related Articles Recommended Metrics Download:  PDF(1483KB)  Export:  BibTeX | EndNote (RIS)       Abstract  An investigation was made of the effect of Al_2O_3 compound on the formation ofBa_2Ti_9O_(20)phase in the solid state reactions.The formation of Ba_2Ti_9O_(20)crystal,which is diffi-cult in the BaO-TiO_2 binary system because of stress arising along the c Key words:  dielectric ceramic      Ba_2Ti_9O_(20)      formation mechanism      Received:  25 December 1992      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1992/V6/I6/528 1 Plourde J K,Linn D F,O＇Bryan H M et al.J Am Ceram Soc,1975:58(1-10) :418 2 O＇Bryan H M,Thomson J,Plourde J K.J Am Ceram Soc,1974;57(10) :450 3 Jonker G H,Kwestroo W.J Am Ceram Soc,1958;41(10) :390 4 O＇Bryan H M,Thomson J.J Am Ceram Soc,1974;57(12) :522 5 Jaakola T,Uusimaki A,Leppavuori S.Int J High Technol Ceram,1980;2:195 6 O＇Bryan H M,Thomson J.J Am Ceram Soc,1983,66(1) :66 7 Noriaki Uchida,Nakoto Ushijima,Etsuo Yanagisawo.US Pat 4 667 259,1985 8 Jenn-ming Wu and Hong-wen Wang.J Am Ceram Soc,1988;71(10) :869 9 O＇Bryan H M,Grozkiewiez W H and Bernstein J L,J Am Ceram Soc,1980;63(5-6) :309 10 Mhaisalkar S G,Lee W E,Readey D W.J Am Ceram Soc,1989;72(11) :2154 11 Tillmanns E,Hofmeister W,Bauth W H.J Am Ceram Soc,1983;66(4) :268 [1] ZHOU Zhangrui, LV Peisen, ZHAO Guoqi, ZHANG Jian, ZHAO Yunsong, LIU Lirong. Stress Rupture Deformation Mechanism of Two "Replacement of Re by W" Type Low-cost Second-generation Nickel Based Single Crystal Superalloys at Elevated Temperatures[J]. 材料研究学报, 2023, 37(5): 371-380. [2] DONG Yu'ang, YANG Huajie, BEN Dandan, MA Yunrui, ZHOU Xianghai, WANG Bin, ZHANG Peng, ZHANG Zhefeng. Excellent Cryogenic Tensile Properties of Ultra-fine Grained 316L Stainless Steel after Electropulsing Treatment in Liquid Nitrogen[J]. 材料研究学报, 2023, 37(3): 168-174. [3] YAN Fuzhao, LI Jing, XIONG Liangyin, LIU Shi. Preparation and Microstructure of FeCr-ODS Ferrite Alloy Fabricated by Oxidation and Powder Forging[J]. 材料研究学报, 2022, 36(6): 461-470. [4] CUI Zhiqiang, ZHANG Ningfei, WANG Jie, HOU Qingyu, HUANG Zhenyi. High Temperature Compression Deformation Behavior of 9Mn27Al10Ni3Si Low Density Steel[J]. 材料研究学报, 2022, 36(12): 907-918. [5] Zhicheng WANG,Hao WANG,Hailiang HUANG,Benfu Hu. Effect of Ta on High Temperature Tensile Properties of Advanced Ni-based Powder Metallurgy Superalloys[J]. 材料研究学报, 2019, 33(5): 331-337. [6] Yutong YANG,Rui LUO,Xiaonong CHENG,Xiang GUI,Leli CHEN,Wei WANG,Qi ZHENG. High Temperature Plastic Deformation Behavior and Hot Workability of an Alumina-forming Austenitic Heat-resisting Alloy[J]. 材料研究学报, 2019, 33(3): 232-240. [7] Guirong YANG,Dawen GAO,Wenming SONG,Yufu ZHANG,Ying MA. Formation Mechanism of Ni/WC Composite Coatings on Carbon Steel[J]. 材料研究学报, 2019, 33(2): 87-94. [8] Jian WANG, Wenjing YANG, Zhuoliang LI, Hua DING, Ning ZHANG, Hongliang HOU. Superplastic Behavior and Deformation Mechanism of 7B04 Al-alloy[J]. 材料研究学报, 2018, 32(9): 675-684. [9] Zhiyuan MEI, Xiaosong ZHOU, Fan WU. Deformation Mechanism and Energy Dissipation of Solid Buoyant Material with Different Ratio of Height to Diameter under Uniaxial Compression Loading[J]. 材料研究学报, 2018, 32(8): 591-598. [10] Yan CHEN, Ping ZHANG, Yonghui SHANG, Xiaoling WANG. Controllable Synthesis and Photocatalytic Activity of ZnO Nano-cones with Different Aspect Ratio[J]. 材料研究学报, 2017, 31(8): 619-626. [11] Caihong YING, Lijia CHEN, Tianlong LIU, Lianquan GUO. Cyclic Creep Behavior of 11.5CrNbTi and 15Cr0.5MoNbTi Ultra Pure Ferritic Stainless Steels[J]. 材料研究学报, 2017, 31(7): 481-488. [12] Yuanzhao LV, Jinglong LI, Peng LI, Tao SUN, Jiangtao XIONG, Fusheng ZHANG. Joint Formation Mechanism of Rotary Friction Welding Characterized by Seaming Ratio[J]. 材料研究学报, 2017, 31(4): 261-266. [13] LIU Huaqiang TANG Di CAI Qingwu MENG Qiang. Deforming Texture and Deformation Mechanism of Coordination of AZ31 Magnesium Alloy Sheets[J]. 材料研究学报, 2012, 26(3): 231-239. [14] YANG Yi LI Geping WU Songquan LI Yulan YANG Ke. Progress in Research of Gum Metal[J]. 材料研究学报, 2011, 25(1): 1-6. [15] XU Hanjiang; CHEN Junming(Shanghai Institute of Metallurgy; Chinese Academy of Sciences). PREPARATION AND PROPERTIES OF Zn_xFe_(3-x)O_4[J]. 材料研究学报, 1995, 9(5): 428-433. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed