Chin J Mater Res  1990, Vol. 4 Issue (1): 26-31    DOI:

Current Issue | Archive | Adv Search |

ADIABATIC SHEAR BAND IN A LOW CARBON STEEL DURING HIGH SPEED DEFORMATION

XU Yongbo;WANG Zhongguang(Institute of Metal Research;Academia Sinica)HUANG Xiaoling;XING Da;BAI Yilong(Institute of Mechanics;Academia Sinica)

XU Yongbo;WANG Zhongguang(Institute of Metal Research;Academia Sinica)HUANG Xiaoling;XING Da;BAI Yilong(Institute of Mechanics;Academia Sinica). ADIABATIC SHEAR BAND IN A LOW CARBON STEEL DURING HIGH SPEED DEFORMATION. Chin J Mater Res, 1990, 4(1): 26-31.

Abstract References Related Articles Recommended Metrics Download:  PDF(1449KB)  Export:  BibTeX | EndNote (RIS)       Abstract  A study has been made of the microstrctures of adiabatic shear band in alow carbon steel,resulting from high speed torsional testing with about 1500 s~(-1)of the aver-age strain rate.Several fine shear bands have been found to distribute over the deformat Key words:  deformation localization      microstructure      microcrack      fracture      Received:  25 February 1990      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1990/V4/I1/26 1 Bai Y L.J Mech Phys Solids,1982;30:195 2 Rauch E,Canova G R,Jonas J J et al.Acta Metall,1985;33:465 3 Wu F H,Freund L B.J Mech Phys Solids,1984;32:119 4 Huand X L.Deformed Shear Bands and Ductile Fracture,Master Degree Thesis,Beijing Institute of Mechanics,1987 5 Xu Y B,Wang Z G,Huang X L,Xing D et al.Mat Sci Engng,1989,A114, 81-87 6 Costin L S,Duffy J.J Mech Phys Solids,1987;27:58 7 Hartley K A,Duffy J.J Mech Phy Solids,1987;35:283 8 Rogers H C.Ann Rer Mat Sci,1979;9:283" [1] PAN Xinyuan, JIANG Jin, REN Yunfei, LIU Li, LI Jinghui, ZHANG Mingya. Microstructure and Property of Ti / Steel Composite Pipe Prepared by Hot Extrusion[J]. 材料研究学报, 2023, 37(9): 713-720. [2] MAO Jianjun, FU Tong, PAN Hucheng, TENG Changqing, ZHANG Wei, XIE Dongsheng, WU Lu. Kr Ions Irradiation Damage Behavior of AlNbMoZrB Refractory High-entropy Alloy[J]. 材料研究学报, 2023, 37(9): 641-648. [3] ZHAO Zhengxiang, LIAO Luhai, XU Fanghong, ZHANG Wei, LI Jingyuan. Hot Deformation Behavior and Microstructue Evolution of Super Austenitic Stainless Steel 24Cr-22Ni-7Mo-0.4N[J]. 材料研究学报, 2023, 37(9): 655-667. [4] XING Dingqin, TU Jian, LUO Sen, ZHOU Zhiming. Effect of Different C Contents on Microstructure and Properties of VCoNi Medium-entropy Alloys[J]. 材料研究学报, 2023, 37(9): 685-696. [5] OUYANG Kangxin, ZHOU Da, YANG Yufan, ZHANG Lei. Microstructure and Tensile Properties of Mg-Y-Er-Ni Alloy with Long Period Stacking Ordered Phases[J]. 材料研究学报, 2023, 37(9): 697-705. [6] XIONG Shiqi, LIU Enze, TAN Zheng, NING Likui, TONG Jian, ZHENG Zhi, LI Haiying. Effect of Solution Heat Treatment on Microstructure of DZ125L Superalloy with Low Segregation[J]. 材料研究学报, 2023, 37(8): 603-613. [7] LIU Ruifeng, XIAN Yunchang, ZHAO Rui, ZHOU Yinmei, WANG Wenxian. Microstructure and Properties of Titanium Alloy/Stainless Steel Composite Plate Prepared by Spark Plasma Sintering[J]. 材料研究学报, 2023, 37(8): 581-589. [8] SHI Chang, DU Yuhang, LAI Liming, XIAO Siming, GUO Ning, GUO Shengfeng. Mechanical Properties and Oxidation Resistance of a Refractory Medium-entropy Alloy CrTaTi[J]. 材料研究学报, 2023, 37(6): 443-452. [9] LEI Zhiguo, WEN Shengping, HUANG Hui, ZHANG Erqing, XIONG Xiangyuan, NIE Zuoren. Influence of Rolling Deformation on Microstructure and Mechanical Properties of Al-2Mg-0.8Cu(-Si) Alloy[J]. 材料研究学报, 2023, 37(6): 463-471. [10] XIA Bo, WANG Bin, ZHANG Peng, LI Xiaowu, ZHANG Zhefeng. Effect of Tempering Temperature on Microstructure and Impact Properties of Two High-strength Leaf Spring Steels[J]. 材料研究学报, 2023, 37(5): 341-352. [11] ZHANG Shuaijie, WU Qian, CHEN Zhitang, ZHENG Binsong, ZHANG Lei, XU Pian. Effect of Mn on Microstructure and Properties of Mg-Y-Cu Alloy[J]. 材料研究学报, 2023, 37(5): 362-370. [12] ZHANG Ruixue, MA Yingjie, JIA Yandi, HUANG Sensen, LEI Jiafeng, QIU Jianke, WANG Ping, YANG Rui. Microstructure Evolution and Element Partitioning Behavior during Heat-treatment in Metastable β Titanium Alloy[J]. 材料研究学报, 2023, 37(3): 161-167. [13] LIN Shifeng, XU Dongan, ZHUANG Yanxin, ZHANG Haifeng, ZHU Zhengwang. Preparation and Mechanical Properties of TiZr-based Bulk Metallic Glass/TC21 Titanium Alloy Dual-layered Composites[J]. 材料研究学报, 2023, 37(3): 193-202. [14] DONG Yu'ang, YANG Huajie, BEN Dandan, MA Yunrui, ZHOU Xianghai, WANG Bin, ZHANG Peng, ZHANG Zhefeng. Excellent Cryogenic Tensile Properties of Ultra-fine Grained 316L Stainless Steel after Electropulsing Treatment in Liquid Nitrogen[J]. 材料研究学报, 2023, 37(3): 168-174. [15] ZHAO Yunmei, ZHAO Hongze, WU Jie, TIAN Xiaosheng, XU Lei. Effect of Heat Treatment on Microstructure and Properties of TIG Welded Joints of Powder Metallurgy Inconel 718 Alloy[J]. 材料研究学报, 2023, 37(3): 184-192. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed