THE TENSILE PROPERTIES IN A HOT-ROLLED DUAL-PHASE STEEL AT CRYOGENIC TEMPERATURE

Chin J Mater Res

1989, Vol. 3

Issue (2): 121-127 DOI:

Current Issue | Archive | Adv Search

THE TENSILE PROPERTIES IN A HOT-ROLLED DUAL-PHASE STEEL AT CRYOGENIC TEMPERATURE

AI Nuhua WANG Zhongguang GONG Wenku (Institute of Metal Research;Academia Sinica)

Cite this article:

AI Nuhua WANG Zhongguang GONG Wenku (Institute of Metal Research;Academia Sinica). THE TENSILE PROPERTIES IN A HOT-ROLLED DUAL-PHASE STEEL AT CRYOGENIC TEMPERATURE. Chin J Mater Res, 1989, 3(2): 121-127.

Download:

PDF(2969KB)
Export: BibTeX | EndNote (RIS)

Abstract The tensile properties and fracture characteristics of a Si-Mn-Cr-Mo series hot-rolled dual phase steel under three straining rates andat temperature ranges from RT to -100℃ have been studied.It was foundthat steel has a good ductility at low temperatures

Key words: hot-rolled dual-phase steel fracture strength yield strength total elongation strain rate strain rate sensitivity

Received: 25 April 1989

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1989/V3/I2/121

1 Davies R G.Metall Trans,1978;9 A:41
2 Marder A R.Metall Trans,1982;13 A:85
3 Tanaka T,Nishida M,Hashiguchi K et al.New York TMS-AIME Warrendalc 1979:221
4 Byun YS,Kim J S,Kim S J.Trans ISIJ,1984;24(5) :372
5 邵潭华,王永兰,耿泽峻.西安交通大学学报,1984;12(6) :37
6 Hart E W.Acta Metall,1970;18(3) :559
7 Lin I H,Hirth J P,Hart E W.Acta Metall,1981;29(5) :819
8 Gael N C,Tseng D,Tangri K.Scripta Metall,1984;18(9) :873
9 Tseng D,Coel N C,Tangri K.Metall Trans,1986;17A(4) :697
10 霍尼康 RWK.材料科学与工程,1983;(2) :42
11 Krishnadev M R,Ghoh R.Metall Trans,1979;10A:1941
12 Nagai K,Ishikawa K,Mizoguch T et al.Cryogenics,1986;26(1) :19N

[1]	LIU Tao, YIN Zhiqiang, LEI Jingfa, GE Yongsheng, SUN Hong. Plastic Deformation Behavior of Selective Laser Melting 316L Stainless Steel under High Strain Rate Compression[J]. 材料研究学报, 2023, 37(5): 391-400.
[2]	SU Nan, CHEN Minghe, XIE Lansheng, LUO Feng, SHI Wenxiang. Dynamic Mechanical Characteristics and Constitutive Model of TC2 Ti-alloy[J]. 材料研究学报, 2021, 35(3): 201-208.
[3]	Dalei ZHANG, Yuanyuan MIAO, He JING, Xiaohui DOU, Youhai JIN. Effect of Sulphite Deposits on Hydrogen Embrittlement Susceptivity of Hot-dip Galvanized Steel in Marine Atmospheric Environment[J]. 材料研究学报, 2018, 32(7): 533-540.
[4]	Huipeng LI, Yi XIONG, Yan LU, Tiantian HE, Meixiang FAN, Fengzhang REN. Effect of Strain Rate on Microstructure Evolution and Mechanical Property of 316LN Austenitic Stainless Steel at Cryogenic Temperature[J]. 材料研究学报, 2018, 32(2): 105-111.
[5]	Jingli SUN, Dan ZOU, Jing JIN, Li LI, Haiying LIU. Localized Corrosion Resistance of Three Commonly-used Stainless Steels[J]. 材料研究学报, 2017, 31(9): 665-671.
[6]	ZHANG Bo, XIE Bowen, FU Huameng, ZHANG Haifeng. Effect of Length to Diameter Ratio on Compressive Properties of W Fiber/Zr-based Metallic Glass Composite[J]. 材料研究学报, 2016, 30(8): 575-580.
[7]	Qiang ZHAO,Yang LIU,Lei WANG,Fang LI. Effect of Strain Rate on Tensile Deformation Behavior of Laser Welded Joints of Superalloy GH4169[J]. 材料研究学报, 2016, 30(12): 881-887.
[8]	Xiaotong GUO, Lei WANG, Chenglei QIN, Xu YUAN. Effect of Heat Input on Dynamic Tensile Deformation Behavior of Q550 Steel[J]. 材料研究学报, 2016, 30(11): 811-818.
[9]	Yongqiang REN,Chengjia SHANG,Hongwei ZHANG,Shengfu YUAN,Erhu CHEN. Effect of Retained Austenite on Toughness and Plasticity of 0.23C-1.9Mn-1.6Si Steel[J]. 材料研究学报, 2014, 28(4): 274-280.
[10]	Yuanzhi WU,Hongge YAN,Suqin ZHU,Jihua CHEN,Anmin LIU,Xianlan LIU. Microstructure Evolution and Mechanical Properties of Mg-Zn-Zr Alloys During High Strain Rate Triaxial-Forging[J]. 材料研究学报, 2014, 28(2): 144-152.
[11]	QIN Xiaomei CHEN Liqing DENG Wei DI Hongshuang. Effect of Strain Rate on Mechanical Properties of Fe–23Mn–2Al–0.2C TWIP Steel[J]. 材料研究学报, 2011, 25(3): 278-282.
[12]	ZHANG Xiaoqiang WANG Dong ZHANG Jian LOU Langhong. Effect of Strain Rate on the Low Cycle Fatigue Properties of Re-free Nickel-base Single Crystal Superalloy[J]. 材料研究学报, 2011, 25(3): 231-236.
[13]	SHA Guiying SUN Xiaoguang LIU Teng ZHU Yuhong FENG Xiaogang. Deformation Localization Behavior of the Mg--3.04Li--0.77Sc Alloys under High--Strain Rate[J]. 材料研究学报, 2010, 24(6): 567-571.
[14]	XU Yongbo YANG Huajie M.A.Meyers . Application of EBSD in the investigation of the deformation microstructure induced during high–strain rate loading[J]. 材料研究学报, 2009, 23(6): 561-571.
[15]	. Stress--strain behavior of X70 pipeline steel under stress wave loading[J]. 材料研究学报, 2004, 18(5): 461-465.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed